Best Automotive Bumper Moldings
Size: Ford Explorer Fitment Images (2011-2017). -- This product fits the following vehicles : 2009-2017 Audi Q5 // 2015-2018 Ford Edge // 2013-2018 Ford Escape // 2011-2017 Ford Explorer (Will not work with Power Liftgate models) // 2015-2018 Lincoln MKC // 2013-2018 Mazda CX-5 (Will not work with Power Liftgate models) // 2013-2016 Nissan Pathfinder // 2014-2018 Toyota Highlander // 2018-2019 Volkswagen Atlas // 2018-2019 Volkswagen Tiguan // 2018-2019 Volvo XC60 –. To ease concerns about fitment, use the size variations above to see images of our bumper protector on your vehicle.
Reviews
Find Best Price at Amazon"The plastic bumper on the 2017 Explorer is easily scratched and dented without this protector."
"3M sticky pads, so long term hold may necessitate a downgrade."
"The strip is so long that it starts to go up in the sides and just barely leaves room for the hatch door to close..."
"I have only had it a few months but it went on easy, covered the right amount of space and stuck good."
"Easy to attach and looks like it is an original equipment option."
"GYes t this for my mother in laws 2017 CX5."
"Installed this onto my wife's 2017 Pathfinder."
"Works well."
Protect and preserve your bumper with the addition of a Rear Bumper Protector. -- This product fits the following vehicles : 2009-2017 Audi Q5 // 2015-2018 Ford Edge // 2013-2018 Ford Escape // 2011-2017 Ford Explorer (Will not work with Power Liftgate models) // 2015-2018 Lincoln MKC // 2013-2018 Mazda CX-5 (Will not work with Power Liftgate models) // 2013-2016 Nissan Pathfinder // 2014-2018 Toyota Highlander // 2018-2019 Volkswagen Atlas // 2018-2019 Volkswagen Tiguan // 2018-2019 Volvo XC60 –. To ease concerns about fitment, use the size variations above to see images of our bumper protector on your vehicle.
Reviews
Find Best Price at Amazon"The plastic bumper on the 2017 Explorer is easily scratched and dented without this protector."
"3M sticky pads, so long term hold may necessitate a downgrade."
"The strip is so long that it starts to go up in the sides and just barely leaves room for the hatch door to close..."
"I have only had it a few months but it went on easy, covered the right amount of space and stuck good."
"Easy to attach and looks like it is an original equipment option."
"GYes t this for my mother in laws 2017 CX5."
"Installed this onto my wife's 2017 Pathfinder."
"Works well."
This complete set includes 4 pieces powder-coated anodized finish aluminum quick release fasteners. 4 pieces steel washers. 4 pieces steel locking nuts with screws. 2 pieces O-rings. Made with 6061 T6-grade high quality solid billet aluminum.
Reviews
Find Best Price at Amazon"May want to use zipties instead of the rubber straps, as they can snap fairly easily."
"I'm actually a fan of iJDMtoy BUT, the rubber fastener broke within a month."
"Rubber bands aren't really strong enough to hold bumper edges up where you want them."
"worked good to hold the hood down on my smart car and gets interesting comments."
"The driver side of my front bumper was hanging due to someone hitting my car a few months ago."
"everything came with it, just like photo."
"Bought mine didn't come with everything it was suppose to come with where do i find the rest of what I need."
Best Automotive Fender Moldings
Fitment: 1997-2006 Jeep Wrangler (TJ) + 2004-2006 Jeep Wrangler Unlimited (LJ). Item Included: 6 Pieces Aftermarket Fender Flares + Mounting Hardware. Style: Pocket-Riveted Style. Materials: UV Protected OE Approved ABS Plastic Construction. Color: Textured Black (Can be painted to match The Color Of Your Vehicle). Installation: Bolt-On. Condition & Features: * Add protection and extra tire coverage to your truck. * It is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. * 100% UV Protection, No chalking, cracking or warping. *No cutting or trimming needed; some drill may be required. *Custom designed for easy Installation.Professional installation is always recommended. E-Autogrilles fender flares featuring rivet style designs in a package that is unmatched for style and durability. Cover your oversized tires with 3" of additional tire coverage over the stock TJ Wrangler fender flares. The side rockers are not attached to the front fenders, so you can choose not to install the side rockers.
Reviews
Find Best Price at Amazon"They are also very close for the holes lining up **the directions make you think that the stamp is on the front part of the fender for the rear wheel but they aren't. A couple of holes on each wheel well you can't access the back part to put the nut as the stock fitting screws directly to the body itself."
"Looks great on my jeep."
"These look great and are easy to install, but they may not cover exactly where your OEM flares were."
"A problem with rear flares not covering the old area."
"Flare's fit perfect, and look really good after they were installed."
"customer service was good but tool two emails to get a response but definitely good for what your paying and these people say its like cheap plastic which when they are not mounted the seem flimsy but once mounted they feel pretty sturdy."
"Nice fit- a little bit more flimsy then I was hoping for."
Best Automotive Door Moldings
EAG JK tubular door significantly increases visibility and accesses to enhance your overall off-road experience. Enter your model number to make sure this fits. PERSONALIZED APPEARANCE - Contemporary spider web design.
Reviews
Find Best Price at Amazon"Love my doors, great product, excellent seller, quick delivery."
"The only other downside is a constant rattle from the door as the latch does not fit tight to the door striker."
"I read where other customers didn't receive instructions, but my set did include assembly and installation instructions."
"Bought these for my JKU and was a little reluctant because of it being from E-autogrilles but I have to say I was thoroughly impressed."
"I ordered these for my 2016 Jeep Wrangler Unlimited "Back Country" edition and they look BAD ASS!!!!"
"Fairly easy to assemble, looks excellent on black jeep, mirrors and latches work well."
"Doors look great good price and great quality."
"Sweet doors but one of my screws broke off on the doors so don't torque it down to tight."
Best Automotive Side Moldings
3M Exterior Attachment Tape is a high performance automotive tape ideal for attaching exterior automotive body side moldings, wheel lip molding, door edge molding, badges, nameplates, emblems, LED Lights and trim. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Used for attaching LED light strip for underhood lighting project on my truck."
"It sticks tick to almost any surface which allows you to mount almost anything you want."
"Good to have lying around your garage."
"We need this product to re-attach out sunshields thank you very much."
"The tape secured the led strips perfectly."
Best Automotive Sunroof Moldings
These molding comes with a 5-YEAR WARRANTY that guarantees they won't chip, crack, tarnish, peel, or fall off. These are carbon fiber, vinyl-wrapped, flexible plastic trim pieces that you place onto your roof or roof's existing moldings. You will be required to cut the moldings to the length of your roof (can be done with scissors).
Reviews
Find Best Price at Amazon"Worked perfect."
Best Automotive Window Moldings
4 Pieces Set Stainless Steel Pillar Post Trim. Full 3M Tape (0.025 inches) On The Back For Easy Installation.
Reviews
Find Best Price at Amazon"I bought the window trim and the pillars."
"One item not addressed in any of the reviews (I read ALL the reviews for the pillar Chrome and the window sill Chrome) is that if you also order the sill Chrome you must put it on first because the pillar Chrome sits right on top of and touching the window sill molding."
"I ordered the chrome pillar post trim and also the chrome sill overlay."
"Looks Amazing with the Chrome window trim I just got!"
"Great fit & look....I love it."
"I suggest you put these on first before you put a weathertech rain guards on."
"Works as described and looks good."
"Passenger side was not cut right."
Best Automotive Headlight Moldings
Package includes One PAIR of 8th Generation 2006 2007 2008 2009 4 DOOR HONDA CIVIC Eyelids eyebrows and installation adhesive for trial purposes and showings ONLY !!! Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Looked and fit in the car just like the photo."
"One was broken when received."
Best Automotive Wheel Well Moldings
The Weather Tech Mud Flap no drill Digital Fit set Literally Mounts In Minutes in most applications without the need for wheel/tire removal, and most importantly without the need for drilling into the vehicles painted surface ensures a contour specifically for each application and molded from a thermoplastic resin, the Weather Tech Mud Flap no drill install will offer undeniable vehicle protection. Fits 2014-2017 GMC Sierra 1500 Pickups.
Reviews
Find Best Price at Amazon"These are a great product and super easy to install."
"I knew I would be driving back through road construction and didn't want to get rock chips on my very first road trip. Made it home with zero rock chips after driving 1300 miles including at least a dozen road construction areas with fresh gravel (local highways to keep the speed down and variable for the first 500 mile break-in, superstition or not)."
"I had to climb under and turn the hardware by hand to make sure that it grabbed the metal."
"The rear flaps are held on with two metal wings that rotate 90 degrees to pinch the fender, and are tightened with allen bolts."
"It arrived before the estimated arrival and installed with ease in no time at all!"
"The rear flaps do not secure very well (they do not look like they will fall off, but nothing secures the lower half of the flap to the edge of the wheel well except a plastic tab that does not do too much)."
"Took all of 15 minutes to install, as they supply the allen wrench and torx bit."
"I like the looks of the product on my 2015 GMC truck, but the screws included could have been about a 1/4" longer to ease the installation."