Best Automotive Performance Cam & Lifter Kits

GM 12499225. Enter your model number to make sure this fits.

These hydraulic lifter camshafts are dyno-matched to Edelbrock's Performer line of intake manifolds to provide increased horsepower and optimum torque from the low-end to the mid-range. Includes a camshaft, hydraulic lifters, assembly lube and instructions.

This Small Block Chevrolet Thumpr hydraulic cam and lifter kit is for high performance street applications. Hydraulic Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears; choppy/thumping idle.

GM 12499225. Enter your model number to make sure this fits.

GM 12499225. Enter your model number to make sure this fits.

The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. Kits feature special brackets and mounting hardware for a variety of engines.

This listing is for a Chevy Pontiac Buick & Oldsmobile set of sixteen (16) Elgin (USA-manufacturer) hydraulic roller lifters for various 1987-2007 Chevrolet small block V-8 engines ( with factory roller block) WITHOUT Active Fuel Management (AFM). Enter your model number to make sure this fits.

Proform Cam Checker Tools are used for removing old cam bearings and installing new ones. Two drive spools.

Meets or exceeds OEM performance requirements. Enter your model number to make sure this fits.

The B&M NAG-1 Locking Transmission Dipstick was designed to allow for a quick and easy check of the automatic transmission fluid level and quality by the vehicle owner/operator without having to go to the dealership. Rugged knurled and B&M logo engraved locking cap.

HandPiston Ring Filer Mount the filer to your work bench, position the ring against the stops, and crank the wheel. Enter your model number to make sure this fits.

OIL PUMP. Enter your model number to make sure this fits.

The soft touch rev control, PN 8728, is designed to be used on standard points ignition or inductive ignition systems. Enter your model number to make sure this fits.

For more than 35 years, the COMP Cams(R) mission has never changed: to produce the highest-performing products possible, provide customers with superior service, and to lead the industry in technological development. Enter your model number to make sure this fits.

Polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components. Enter your model number to make sure this fits.

These Magnum Roller Rocker Arms for Pontiac V8 265-455 applications are the ultimate street rocker. Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift.

Rocker Arm. 3/8 in Stud Mount. Enter your model number to make sure this fits.

Moroso 85605. Enter your model number to make sure this fits.

Called "HYPERformance", Energy Suspension's Hyper-Flex is performance polyurethane that delivers an amazing amount of performance to any vehicle that runs with it. Whether domestic or import, front, rear or 4WD, or old or new, all vehicles will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane suspension components. Hyper-Flex replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently.

Camshaft Drive Kit. Enter your model number to make sure this fits.

Thrust Bearing, Ford 351C, 429-460. Enter your model number to make sure this fits.

KraftWerks is proud to introduce its Rotrex-based supercharger system for Honda's 2006-2011 Civic Si. Enter your model number to make sure this fits.

BD Diesel Performance Super B Special Turbo Kits include an adjustable waste gate, all necessary adapters, down pipes, spring-loaded T-bar clamps and turbo feed or drain fittings. Enter your model number to make sure this fits.

Moroso 85474 Universal Air/Oil Separator. Enter your model number to make sure this fits.

Spectre’s Split Loom Convoluted Tubing is designed to organize and dress up engine compartments. Enter your model number to make sure this fits.

Exclusive 9000 Series Space Age 9000 Material Precision Ground and Micro-Polished Knife Edged counterwieghts profiled for Ease of Balance Lightening holes in All Rod Throws Straight Shot Oil Holes. Enter your model number to make sure this fits.

They slip into the engine block dowel pin holes with ease, and are designed to be turned easily with an open-end wrench. Once it's pointed in right direction, turn the set screw to tighten.

Cylinder Head Specifications: Combustion chamber volume: 70cc / 64cc; Intake runner volume: 185cc; Exhaust runner volume: 60cc; Intake valve diameter: 2.02"; Exhaust valve diameter: 1.60"; Valve stem diameter: 11/32"; Valve guides: Manganese bronze; Deck thickness: 9/16"; Valve spring diameter: 1.460"; Valve spring maximum lift: .550"; Rocker stud: 3/8" with guide plate; Guideplate: Hardended steel; Pushrod diameter: 5/16"; Valve angle: 23°; Exhaust port location: Stock; Spark plug fitment: 14mm x 3/4 reach, gasket seat * Use with Hydraulic Flat Tappet Camshafts .550" max lift. Entry Level Street Performance Upgrade.

These engine valve covers are the tall style with oil breather baffles. Engine valve covers feature the black ""Ford Racing"" logo.

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. Enter your model number to make sure this fits.

ISKY 200-AGP. Enter your model number to make sure this fits.