Best Automotive Performance Complete Exhaust Kits
The turbo back type exhaust system mounts directly to the turbo and provides maximum diameter as well as reduced band degree angles and mandrel bent pipe. Installs with common hand tools. Can improve fuel economy by 1-2 mpg.
Reviews
Find Best Price at Amazon"I installed this on my 2007 F250 Crew Cab Short Bed 6.0 Powerstroke which was completely stock. If you have a crew cab short bed, the middle section of the pipe will require cutting since this model will fit both crew cab short and long bed and extended cabs."
"There is a bolt that sticks out the side of the inner fender well, that can be trimmed to make removal of the factory downpipe much easier."
"I love this exhaust."
"The turbo spool sounds beautiful, and the turbo lag has decreased significantly."
"The directions were easy to follow and install took my about 4 hours with my father in town and helping."
"2006 F250 Extended Cab matted to a 6" MBRP tip."
"Night and day difference my truck can breath better and this exhaust for the price is well worth it."
"It took 4 hours to get it lined up to not rattle."
These short, single chamber mufflers are designed to satisfy those customers who are looking for the most aggressive sound level possible. Delta Flow technology for maximum scavenging effect.
Reviews
Find Best Price at Amazon"Not as loud as everyone makes it seem or maybe I'm deaf."
"I had the flowmaster American Thunder series cat back kit in before replacing just the muffler with this super 10 and the difference is night and day."
"It gives my 5.3 Silverado a little sound without being to loud."
"Put it on my 1999 GMC Sierra 5.3 vortec and it sounds amazing!"
"Great muffler put this on my 3rd gen Camaro street and strip car sound nasty at a idle I would highly recommend."
"Perfect sound level for my 2004 Tahoe with a 4.8 vortec."
"Kick ass sound !!"
"Previously I had a Flowmaster 80 series which was okay but the Super 10 is much deeper but not overly loud.Very Very noticeable on the inside of my car."
This bolt-on direct fit muffler for trucks with the factory dual tailpipes features a special build Outlaw muffler that has the inlet pipe and hangers pre welded The exhaust system is manufactured in the USA and is covered by Flowmasters Lifetime Limited Warranty. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"If you opt not to cut it off then you have to dismantle the entire system from the tailpipes to the factory muffler which will take a few hours if you’re alone and using simple hand tools."
"The reason I chose the outlaw was because of the deep aggressive sound."
"Removal of the stock muffler was a bit of a pain (as expected) but the install of of the new Flowmaster Outlaw was fairly easy."
"YouTube videos don't do the sound any justice."
"These mufflers make my Hemi sound like a beast."
"Installation was as easy as could be."
"The factory clamps it came with suck however."
"First time using flowmaster and I love it."
Best Automotive Performance Exhaust Pipes
Replace that restrictive factory downpipe with a MBRP direct replacement downpipe for more flow, fuel economy, and better performance. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The truck had some exhaust drone after the 4" system install, but after the addition of the downpipe the drone disappeared!"
"To remove, soak with PB Blaster!!!!"
"It is possible to remove as a whole, which in my case I spent the extra time and hassle of removing the old pipe as a whole."
"Worth every penny and the exhausting fight you will have in removing the stock down pipe if you're working on your GM Duramax truck."
"Photo is of the down pipe before I removed the paint."
"Great downpipe for a great price and fast shipping."
"it has a new deeper sound and no scream when you get on it like it had before, with my 4' MBRP straight pipe."
"Works great fits like a glove on my 2005 duramax lly. Only problem I had with the instal was removing the old heat shield but other than that pretty simple."
Best Automotive Performance Exhaust Flanges
Vibrant 3" Stainless Steel V-Band Flange Assembly provides excellent grip even in stress, vibrating and extreme temperature conditions. The V-band clamp design allows for a gasket free seal and the quick release feature of these clamps makes swapping parts at the track quick and easy.
Reviews
Find Best Price at Amazon"This is a wonderful quality V-Band clamp."
"Worked exactly as intended for a 3" exhaust hookup to a turbo charger on a vehicle."
"The ability to spin the pipe around before clamping is invaluable, especially if you're trying to fit custom pieces together."
"They provide easy alighnment and much better sealing and the corrosion resistant 304 stainless will handle the heat as well."
"Vibrant stuff is my favorite for budget-ish exhaust components, they are VERY VERY good quality for the price you're paying, and weld exceedingly well."
"quality is fine, good appearance."
"Great but expensive haha but vibrant is worth it."
Best Automotive Performance Exhaust Hangers
Universal 2.5in Hanger 304.
Reviews
Find Best Price at Amazon"Good product design but the execution has something to be desired."
"I used this to replace the hanger hook on a muffler of a 2007 Saturn Ion."
"It lines up well because of the adjustable arm."
"It's an exhaust clamp, nothing to special but it did everything I needed."
"Great for DIY exhaust systems."
"As expected and arrived in good time."
"Great product, very versatile, use bolt cutter to shorten bolt when adjusted height."
Best Automotive Performance Exhaust Mufflers
These short, single chamber mufflers are designed to satisfy those customers who are looking for the most aggressive sound level possible. Delta Flow technology for maximum scavenging effect.
Reviews
Find Best Price at Amazon"Not as loud as everyone makes it seem or maybe I'm deaf."
"I had the flowmaster American Thunder series cat back kit in before replacing just the muffler with this super 10 and the difference is night and day."
"It gives my 5.3 Silverado a little sound without being to loud."
"Put it on my 1999 GMC Sierra 5.3 vortec and it sounds amazing!"
"Great muffler put this on my 3rd gen Camaro street and strip car sound nasty at a idle I would highly recommend."
"Perfect sound level for my 2004 Tahoe with a 4.8 vortec."
"Kick ass sound !!"
"Previously I had a Flowmaster 80 series which was okay but the Super 10 is much deeper but not overly loud.Very Very noticeable on the inside of my car."
Best Automotive Performance Exhaust Studs & Nuts
Blox Racing and its manufacturing partners meet or exceed ISO 9001 certification which further ensures Blox Racing's overall commitment to the highest standards of production management and quality control. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Bought this about a year ago and installed, was super impressed and without a doubt you NEED these if installing an aftermarket intake manifold on an H series engine with a thermal gasket."
Best Automotive Performance Exhaust System Headers & Accessories
- Made of Pulverized Lava Rock and Stranded Into a Fiber Material. ★ Package include 1 rolls of 50ft long header exhaust wrap and 10 pieces stainless steel locking ties.e roll of 50ft long header exhaust wrap with 10 pieces stainless steel locking ties.
Reviews
Find Best Price at Amazon"Way cheaper than any store near me!"
"I soaked it in water, just as everyone would say, it helps keep the fiberglass from getting airborne and from you breathing it in."
"Wrap and fasteners."
"I install this product on my motorcycle yamaha warrior 1700cc and it works perfect now I can ride my motorcycle more in the summer without feeling the heat of the mufflers on my legs."
"Great product and way cheaper than the same thing you can buy in the auto parts store."
"Good Price, Fast Shipping, Works as advertised."
"Looks good see what life of product is."
"Great product!"
Best Automotive Performance Electric Assist Choke Controls
The Edelbrock Performer 600 CFM Vacuum Secondary Electric Choke Remanufactured Carburetors are completely disassembled, inspected and thoroughly cleaned before reassembly for maximum fuel economy. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I ended up buying an AEM Wideband A/F guage and tuned the carb to Idle at 14.7, Cruise at 14-15, and WOT 12.5-13.5."
"did not have dvd that comes with carb."
"it was missing parts gaskets electric choke wiring carb plugs I am not happy."
"Had no problems."
"I only had 50 miles on the carb before it stopped being safe to drive."
"Replaced carb with another Edelbrock 600 CFM that was on another running vehicle and the fuel pressure regulator works fine."
"I was getting gas to the carb but not thru the carb. I did not run truck long enough to have it look like this and the gas I am using I bought that day and checked to see from leftover in the can and it is clean good gas... At this point I am very disapointed..."
"As soon as I got it the electric choke went out, its a pain in the butt to keep tuned, runs too rich or too lean and hard to find a happy spot I can leave it for even a week but I have to keep changing it almost daily."
Best Automotive Replacement Exhaust Pipes
Replace that restrictive factory downpipe with a MBRP direct replacement downpipe for more flow, fuel economy, and better performance. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The truck had some exhaust drone after the 4" system install, but after the addition of the downpipe the drone disappeared!"
"To remove, soak with PB Blaster!!!!"
"It is possible to remove as a whole, which in my case I spent the extra time and hassle of removing the old pipe as a whole."
"Worth every penny and the exhausting fight you will have in removing the stock down pipe if you're working on your GM Duramax truck."
"Photo is of the down pipe before I removed the paint."
"Great downpipe for a great price and fast shipping."
"it has a new deeper sound and no scream when you get on it like it had before, with my 4' MBRP straight pipe."
"Works great fits like a glove on my 2005 duramax lly. Only problem I had with the instal was removing the old heat shield but other than that pretty simple."
Best Automotive Performance Fuel Inlet Repair Fittings & Gaskets
The Edelbrock Carburetor Inlet Fittings are accessories which are used to install and tune Edelbrock carburetors. Fitting can be rotated 360 degrees and allows to aim your fuel inlet towards the front or rear of the carburetor.
Reviews
Find Best Price at Amazon"This 8089 inlet fitting for my Edelbrock Performer 500cfm 4bbl carburetor along with the 2" high Edelbrock 1218 air filter element gave me the hood clearance I needed after installing the Performer intake manifold (which is a higher rise than the stock manifold)."
"The pickup runs well with the new carburetor without any of the problems the old carburetor was giving."
"This fitting seems to be of high quality and works great with my drop air cleaner base."
"Perfect solution to clearance issues caused by my addition of a 'Dropped' Base Air Cleaner on a 600CFM Edelbrock 4-Barrel Carb."
"Edelbrock should of made this item, 8126, years ago."
"Moved my fuel out of the way.....great fit!"
"Just what I needed for air cleaner clearance."
Best Automotive Replacement Exhaust Header Gaskets
Vibrant 2-Bolt High Temperature Exhaust Gasket is designed to custom-fabricate vehicle’s exhaust system. Designed to custom-fabricate vehicle’s exhaust system.
Reviews
Find Best Price at Amazon"Not much to say was in a pinch to get a downpipe gasket for my 2013 sti and this was the quickest one I could get."
"Great part needed 2 for my car perfect fit!"
"For some reason I cannot find these locally."
"Used to replace a gasket between a 3" down pipe and 3" exhaust on a Subaru WRX platform - worked great!"
"Best gaskets hands down."
"Fit my 2012 WRX with a Turbo XS 3" Turbo back exhaust."
"This is a great product however, I needed the measurements of the inside diameter, outside, and bolt hole measurements."
"No part on Amazon's fault because shipping came on time and product was labeled correctly. I believe it is manufacture's fault for incorrectly labeling this product?"
Best Automotive Performance Exhaust Manifolds
Direct bolt-on replacement of original equipment with low restriction tubular design. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Ehhh it's ok."
"Pacesetter has been around for a very long time and has been a very good product line even for hard to find applications."
"Not perfect fit by my mecsnic make work code clear so far is good."
"Exhaust flange doesn't fit properly and needed to fixed to be flush."
"I ended up replacing the studs and using a stainless bolt and nut for the connection to the secondary exhaust pipe."
"Have it installed on a 2006 Nissan Titan that had cracked OEM manifolds."
Best Automotive Replacement Exhaust Header Bolts
SB Chevy LS1 & LS6 5.7L & 6.8L hex head bolt kit. There is a Mid-Year split on the head bolts, If you have ALL SAME Size head bolts this kit is NOT for YOU, see part 134-3610.
Reviews
Find Best Price at Amazon"Excellent."
"Great product and a great price."
Best Automotive Replacement Exhaust Hanger Parts
Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts. New Walker accessories help to ensure effective exhaust repairs.
Reviews
Find Best Price at Amazon"On the factory exhaust brackets both hooks are the same size and there are equal distance to attach it to the hangers, so I am not sure why this one is lopsided in a way. The bolt is super long for some reason, they could have supplied one that was half it's length and it would have looked better, but small thing."
"Used for my rusted system on my Ranger."
"Perfect replacement for 1999 Ford Ranger."
"Fits in the bracket and supports the muffler on my 99 Ford Ranger."
"It would probably have been fine on a replacement muffler, but I was trying to secure my OEM MUFFLER."
"I received this in less than 24 hours!"
"Rather than go through the hassle of a return I was able to make it work but not the way I expected based on the items description."
Best Automotive Replacement Electric Choke Conversion Kits
This five-foot cable choke conversion kit from Help comes with a black knob and includes everything needed to install. Kit includes manual choke cable and everything needed for installation.
Reviews
Find Best Price at Amazon"When I dropped the small lock washers and nuts, I was able to retrieve it within the valleys of the engine block with the magnetic screwdriver."
"Not heavy enough to open choke after closing it."
"GREAT PRODUCT FAST DELIVERY."
"All parts nessasary for easy installation were there ."
"I am a mechanic and will not use this kit again if another is available with a heaver cable."
"You get what you pay for."
"I ordered this kit and the package was opended inside the delivery box."
Best Automotive Replacement Electric Assist Choke Controls
The Edelbrock Performer 600 CFM Vacuum Secondary Electric Choke Remanufactured Carburetors are completely disassembled, inspected and thoroughly cleaned before reassembly for maximum fuel economy. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I ended up buying an AEM Wideband A/F guage and tuned the carb to Idle at 14.7, Cruise at 14-15, and WOT 12.5-13.5."
"did not have dvd that comes with carb."
"it was missing parts gaskets electric choke wiring carb plugs I am not happy."
"Had no problems."
"I only had 50 miles on the carb before it stopped being safe to drive."
"Replaced carb with another Edelbrock 600 CFM that was on another running vehicle and the fuel pressure regulator works fine."
"I was getting gas to the carb but not thru the carb. I did not run truck long enough to have it look like this and the gas I am using I bought that day and checked to see from leftover in the can and it is clean good gas... At this point I am very disapointed..."
"As soon as I got it the electric choke went out, its a pain in the butt to keep tuned, runs too rich or too lean and hard to find a happy spot I can leave it for even a week but I have to keep changing it almost daily."
Best Automotive Performance Exhaust Header Bolts
SB Chevy LS1 & LS6 5.7L & 6.8L hex head bolt kit. There is a Mid-Year split on the head bolts, If you have ALL SAME Size head bolts this kit is NOT for YOU, see part 134-3610.
Reviews
Find Best Price at Amazon"Excellent."
"Great product and a great price."
Best Automotive Performance Electric Choke Conversion Kits
The Edelbrock Carburetor EPS 800 CFM Electric Choke is designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Comes with 113 primary metering jets, 101 secondary metering jets and 0.071 x 0.047 metering rods.
Reviews
Find Best Price at Amazon"Slapped this big dog on my RV 454 and got instant performance out of the box."
"Since I had to take the old carb off and I have been wanting to see if a larger carb would help my 454 pull a new trailer, I stepped up from a 600 to and 800."
"Matches my intake, bigger than the 1407 I had on it, it's brand new, hasn't been rebuilt 10 times, came w/video to explain some stuff."
"Just as described, worked very well right out of the box."
Best Automotive Performance Carburetor Throttle Ball Joints
This throttle ball assortment helps to replace worn throttle studs and includes 4 throttle balls with various threads to allow linkage finishing. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Great kit."
"I needed a ball for one of my old Holley 94 carburetors."
"But the one I needed was in there and no one else was selling just the one I needed at this set's price point."
"Great works on that carbarator."
"Nice but should be included with a new carb purchase."
Best Automotive Performance Carburetor Governor Diaphragms
The Holley cover diaphragm housing is designed to balance secondary operations on a 1x4 barrel application. Enter your model number to make sure this fits.
Find Best Price at AmazonBest Automotive Replacement Exhaust Hangers
Universal 2.5in Hanger 304.
Reviews
Find Best Price at Amazon"Good product design but the execution has something to be desired."
"I used this to replace the hanger hook on a muffler of a 2007 Saturn Ion."
"It's an exhaust clamp, nothing to special but it did everything I needed."
"Great for DIY exhaust systems."
"As expected and arrived in good time."
"Great product, very versatile, use bolt cutter to shorten bolt when adjusted height."
"Holds my after market exhaust pipe in place after the original one broke apart, its easy to install and cheaper than welding."
Best Automotive Replacement Exhaust Headers & Parts
The exhaust manifold found on the 1997-2005 Subaru Impreza 4 Cylinder Engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Precision machined steel flanges that provide a tight seal at the head and allows a high flow rate through the primary tubes.
Reviews
Find Best Price at Amazon"First of all, I took a risk buying for my 2001 Subaru Legacy GT after doing some research about all Subaru 2.5l motors (which said that UEL headers should fit all 2.5l motors)."
"02 Impreza Wagon, 2.5l, Automatic."
"Another fitment issue was the oil cooler/coolant lines. Once installed there was a coolant line coming from the oil cooler that was just resting on the header."
"Together with this install i also installed: Walker 54573 Ultra EPA Certified Catalytic Converter. Bosal 279-771 Exhaust Silencer (because the Walker one comes up short). Walker 54315 Quiet-Flow Stainless Steel Muffler Assembly. Walker 35412 Hardware Spring Bolt Kit. Walker 31357 Exhaust Gasket. This setup proves quieter than the stock setup and more powerful than the Invidia g200 it was replacing."
"I will not lie I bought a different header that was a pain to install which it did not fit 100%, but this one did need some muscling to get it to fit correctly."
"Just installd yesterday went on easier than expexted had to cut the spacer on the one side to stretch, used a ounch pin to line up the holes."
"I was putting it on my 2005 Subaru Impreza 2.5rs... fitment was awful, should have returned them but I needed headers at the time."
"They were 1-2 inches short of fitting (even though they claim to fit perfectly) I had to get a local shop to extend and fit, and install them costing me nearly 3 times the price of the headers themselves."
Best Automotive Replacement Carburetor Floats
Carburetor / Tecumseh 640084B Pack Size:1 TECUMSEH 640084B, TECUMSEH 640084A, TECUMSEH 640084, TECUMSEH 632107, TECUMSEH 632107A GREEN LINE 13141, OREGON 50-640, OREGON 49-242, ROTARY 13141 TECUMSEH HSK40, HSK50, HSSK40, HSSK50, HS50, LH195SA Gasket NOT included , Not for Go-Kart applications , Not compatible with greater than 10% ethanol fuel. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The time it'd have taken to rebuild or have someone else rebuild the original isn't even worth it. The only negative I can come up with is the spring for the choke detente was perfectly vertical and when I attached my choke lever, it would've engage on the fully closed choke detente, to fix this I simply took a screw driver and forced the spring over a tiny bit, enough to loosen up the tension...and wala!"
"I took the old carb off and put this one on."
"This was almost too easy, there re no more adjustments (factory sealed), primed it 5-6 times and it fired right off, running smoothly."
"A better cheaper way to fix my snowblower than trying to have the original carb rebuilt."
"time Rita was a direct fit worked perfectly amazing price I would recommend this to anybody."
"Awesome carburetor!"
"BTW.... My old one had an adjustable main jet, this one is a fixed jet."
"I was very hesitant at this price but the machine runs perfectly."