Best Automotive Performance Exhaust Systems
This bolt-on direct fit muffler for trucks with the factory dual tailpipes features a special build Outlaw muffler that has the inlet pipe and hangers pre welded The exhaust system is manufactured in the USA and is covered by Flowmasters Lifetime Limited Warranty. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The factory clamps it came with suck however."
"Removal of the stock muffler was a bit of a pain (as expected) but the install of of the new Flowmaster Outlaw was fairly easy."
"YouTube videos don't do the sound any justice."
"Installation was as easy as could be."
"Big improvement on sound and performance."
"Delivery was ahead of schedule."
"Bought a used-like new muffler through Amazon prime and it was not in the greatest condition for quality."
"Sounds amazing, yes there is a drone sound at 65mph but i'm ok with it, the install was a bit of a pain, had to use my reciprocating Saw but after 45 minutes it was all good... Great fit for My Ram Rebel 2016."
The Adhesive Backed Heat Barrier protects parts and components from radiant heat. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.
Reviews
Find Best Price at Amazon"I used this on the transmission tunnel of my mazda miata when I was doing the clutch I was a little skeptical on how good it would work but it cut down the heat in the foot compartment considerably."
"Even with lots of rain (and pasted upside down), it seems to stick well (t's been there for three weeks now, so still relatively new) and the heat deflection seems impeccable."
"Put this on my wall next to my stove's gas burners as there is no countertop space between the two."
"It works, the adhesive is very weak however, the plastic backing was just falling off when it arrived."
"Worked as expected."
"After removing the thin OEM heat tape and applying this thick stuff, there is barely any heat coming thru."
"Then just slowly peeled the backing off and pressed the material in place as I went. The stickum is very strong and holds the material in place extremely well."
"Perfect for heat shielding motorcycle fairings."
Vibrant 3" Ultra Quiet Resonator is designed to dampen exhaust noise and facilitate undisrupted exhaust flow. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I installed this on a 2006 Subaru Legacy GT that came with a raspy sounding 3" turbo back exhaust."
"I am usually disappointed with at least some part of a product but NOT this product. ZERO drone."
"But it is the Perfect resonators for guys/girls who want performance and tone, or anyone who wants there car to sound amazing at WOT or when you step on the gas, but want the cabin to remain bearable with little to no drone."
"Car sounds the same at idle and low rpm but the drone is almost completely gone!"
"After installing, it was way louder than stock and produced an annoying drone at 1500/2000 rpm. Overall the exhaust is about stock sounding, just a little deeper and there is no change in performance."
"It was a commitment to cut into my beautiful exhaust system to install this, but I am glad I did."
"Another thing I shopped all around for a better price but I couldn't find one better than what was listed by this seller here in Amazon. The item arrived on time and was packaged in original boxed, meaning you get what you pay for not some eBay after market special."
"It did quiet my exhaust (350 V8 w full headers and no cat) by 30% imo."
Best Automotive Performance Cat-Back Exhaust Systems
Stainless Steel Cat-Back System exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. This new ATAK exhaust system from borla is one of their finest over all exhaust systems, and the most aggressive and powerful system available for Camaro.
Reviews
Find Best Price at Amazon"After researching all kind of cat-back exhausts I decided to go with the Borla Atak for my 2010 Camaro SS, And I'm so glad I did."
"AWESOME sound quality for our Camaro."
"Then you have people that whine because it is a little loud especially in a low gear at a high speed."
"Gives a great rumble, awesome sound worthy of a sports car."
"The sound is unbelievable and will make your SS sound like it looks."
"I was hoping it would be louder but it sounds great."
"They definitely meet my expectations and then some."
"Added this modification to my 2011 camaro ss and it really woke this beast of a car up!"
Best Automotive Performance Catalytic Converters & Parts
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Designed for easy bolt-on installation;Reduces harmful emissions.
Reviews
Find Best Price at Amazon"Don't try any other way to remove the old or install the new."
"great value, comes with the gaskets and clamps."
"These mounted up really easy."
"Easy to install and fits good under 04 Silverado."
"Works great."
"It was a piece of cake installing these!"
"Mainly removing the longer section required dropping the cross brace and pulling down on it to slide pipe out."
"Had an issue with o2 sensor bung stripped out."
Best Automotive Performance Exhaust Clamps
Vibrant Exhaust Sleeve Clamp allows quick, easy and secure strapping of same sized tubing. Allows quick, easy and secure strapping of same sized tubing.
Reviews
Find Best Price at Amazon"Works great, very solid clamp, no leaks."
"Great product, it was exactly what I needed and for a great price."
"Used this on my mk6 gti."
"Fits 2.50 OD pipe much better than a band clamp by far also the mufflers can be adjusted easier."
Best Automotive Performance Complete Exhaust Kits
The turbo back type exhaust system mounts directly to the turbo and provides maximum diameter as well as reduced band degree angles and mandrel bent pipe. Installs with common hand tools. Can improve fuel economy by 1-2 mpg.
Reviews
Find Best Price at Amazon"I installed this on my 2007 F250 Crew Cab Short Bed 6.0 Powerstroke which was completely stock. If you have a crew cab short bed, the middle section of the pipe will require cutting since this model will fit both crew cab short and long bed and extended cabs."
"There is a bolt that sticks out the side of the inner fender well, that can be trimmed to make removal of the factory downpipe much easier."
"I love this exhaust."
"The turbo spool sounds beautiful, and the turbo lag has decreased significantly."
"The directions were easy to follow and install took my about 4 hours with my father in town and helping."
"2006 F250 Extended Cab matted to a 6" MBRP tip."
"Night and day difference my truck can breath better and this exhaust for the price is well worth it."
"It took 4 hours to get it lined up to not rattle."
Best Automotive Performance Exhaust Coatings
Recommended for use with DEI non-Titanium exhaust wraps, HT Silicone Coating penetrates, seals and protects as well as helping to extend the lifespan of exhaust wrap. Works equally well on exhaust headers, pipes, engine blocks, and other applications where coatings are required.
Reviews
Find Best Price at Amazon"I used this to spray over my newly wrapped exhaust pipes."
"Last summer I rode, after installing the black header wrap without coating, it quickly faded to grey then white."
"This product is really good."
"I wrapped the exhaust on my polaris ranger and used this to seal it."
"Great coverage, color, easy to use, very high heat tolerance. Pros - Goes on very well, dries fast, covers great, very heat resistant. Cons - Expensive but you get what you pay for. Used on the Y Pipe and cat back of my Camaro Z28 and then covered them with header wrap."
"Excellent product!!"
"Sprayed this on the exhaust wrap, let dry for a couple of days, then let the engine idle for 30 minutes or so."
"Worked great to "seal" my motorcycle exhaust wrap."
Best Automotive Performance Exhaust Extension Pipes
The Off Road Header Extensions are designed to connect the long tube headers to the stock or stock replacement exhaust system. Extensions connect PaceSetter's long tube headers to the stock or stock replacement exhaust system.
Find Best Price at AmazonBest Automotive Performance Exhaust Flanges
Vibrant 3" Stainless Steel V-Band Flange Assembly provides excellent grip even in stress, vibrating and extreme temperature conditions. The V-band clamp design allows for a gasket free seal and the quick release feature of these clamps makes swapping parts at the track quick and easy.
Reviews
Find Best Price at Amazon"This is a wonderful quality V-Band clamp."
"Worked exactly as intended for a 3" exhaust hookup to a turbo charger on a vehicle."
"The ability to spin the pipe around before clamping is invaluable, especially if you're trying to fit custom pieces together."
"They provide easy alighnment and much better sealing and the corrosion resistant 304 stainless will handle the heat as well."
"Vibrant stuff is my favorite for budget-ish exhaust components, they are VERY VERY good quality for the price you're paying, and weld exceedingly well."
"quality is fine, good appearance."
"Great but expensive haha but vibrant is worth it."
Best Automotive Performance Exhaust Hangers
Universal 2.5in Hanger 304.
Reviews
Find Best Price at Amazon"Good product design but the execution has something to be desired."
"I used this to replace the hanger hook on a muffler of a 2007 Saturn Ion."
"It lines up well because of the adjustable arm."
"It's an exhaust clamp, nothing to special but it did everything I needed."
"Great for DIY exhaust systems."
"As expected and arrived in good time."
"Great product, very versatile, use bolt cutter to shorten bolt when adjusted height."
Best Automotive Performance Exhaust System Headers & Accessories
- Made of Pulverized Lava Rock and Stranded Into a Fiber Material. ★ Package include 1 rolls of 50ft long header exhaust wrap and 10 pieces stainless steel locking ties.e roll of 50ft long header exhaust wrap with 10 pieces stainless steel locking ties.
Reviews
Find Best Price at Amazon"Way cheaper than any store near me!"
"I soaked it in water, just as everyone would say, it helps keep the fiberglass from getting airborne and from you breathing it in."
"Wrap and fasteners."
"I install this product on my motorcycle yamaha warrior 1700cc and it works perfect now I can ride my motorcycle more in the summer without feeling the heat of the mufflers on my legs."
"Great product and way cheaper than the same thing you can buy in the auto parts store."
"Good Price, Fast Shipping, Works as advertised."
"Looks good see what life of product is."
"Great product!"
Best Automotive Performance Exhaust Heat Shields
This bolt-on direct fit muffler for trucks with the factory dual tailpipes features a special build Outlaw muffler that has the inlet pipe and hangers pre welded The exhaust system is manufactured in the USA and is covered by Flowmasters Lifetime Limited Warranty. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The factory clamps it came with suck however."
"Removal of the stock muffler was a bit of a pain (as expected) but the install of of the new Flowmaster Outlaw was fairly easy."
"YouTube videos don't do the sound any justice."
"Installation was as easy as could be."
"Big improvement on sound and performance."
"Delivery was ahead of schedule."
"Bought a used-like new muffler through Amazon prime and it was not in the greatest condition for quality."
"Sounds amazing, yes there is a drone sound at 65mph but i'm ok with it, the install was a bit of a pain, had to use my reciprocating Saw but after 45 minutes it was all good... Great fit for My Ram Rebel 2016."
Best Automotive Performance Exhaust Heat Wrap, Matting & Sleeving
Ideal for shielding fuel lines - helping to stop vapor lock, protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. Helps to prevent vapor lock, protects wires from melting, shields oil and brake lines.
Reviews
Find Best Price at Amazon"Anyway, as two layers it does ok, but it's expensive and stingy on the enclosed shrink wrap so I give it 4 stars instead of 5."
"bought this to combat high under hood temps on my highly modified corvette."
"But the heat shield itself is great quality."
"Helped prevent vapor lock..."
"Makes fuel lines look great!"
"Where they are exposed in the cockpit, it provides a nice finishing touch that looks good and protects them a little."
"Had some left over so I used it on wiring inside the rear fender on my 77 FXE."
Best Automotive Performance Engine Intake Manifold & Parts
Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The gasket between the exausht manifold and the Turbo was not installed by the installers."
"good quality easy to install."
"Very expensive but fit perfectly."
"I thought these were a bit pricy and felt they should have been supplied with the BD performance manifold."
"Great product, fast shipping."
"Bought this kit when I purchased a BD 2 piece exhaust manifold."
"Fits right up great product."
Best Automotive Performance Exhaust Mufflers
These short, single chamber mufflers are designed to satisfy those customers who are looking for the most aggressive sound level possible. Delta Flow technology for maximum scavenging effect.
Reviews
Find Best Price at Amazon"Not as loud as everyone makes it seem or maybe I'm deaf."
"I had the flowmaster American Thunder series cat back kit in before replacing just the muffler with this super 10 and the difference is night and day."
"It gives my 5.3 Silverado a little sound without being to loud."
"Put it on my 1999 GMC Sierra 5.3 vortec and it sounds amazing!"
"Great muffler put this on my 3rd gen Camaro street and strip car sound nasty at a idle I would highly recommend."
"Perfect sound level for my 2004 Tahoe with a 4.8 vortec."
"Kick ass sound !!"
"Previously I had a Flowmaster 80 series which was okay but the Super 10 is much deeper but not overly loud.Very Very noticeable on the inside of my car."
Best Automotive Performance Exhaust Pipes
Replace that restrictive factory downpipe with a MBRP direct replacement downpipe for more flow, fuel economy, and better performance. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The truck had some exhaust drone after the 4" system install, but after the addition of the downpipe the drone disappeared!"
"To remove, soak with PB Blaster!!!!"
"It is possible to remove as a whole, which in my case I spent the extra time and hassle of removing the old pipe as a whole."
"Worth every penny and the exhausting fight you will have in removing the stock down pipe if you're working on your GM Duramax truck."
"Photo is of the down pipe before I removed the paint."
"Great downpipe for a great price and fast shipping."
"it has a new deeper sound and no scream when you get on it like it had before, with my 4' MBRP straight pipe."
"Works great fits like a glove on my 2005 duramax lly. Only problem I had with the instal was removing the old heat shield but other than that pretty simple."
Best Automotive Performance Exhaust Resonators
Vibrant 3" Ultra Quiet Resonator is designed to dampen exhaust noise and facilitate undisrupted exhaust flow. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I installed this on a 2006 Subaru Legacy GT that came with a raspy sounding 3" turbo back exhaust."
"I am usually disappointed with at least some part of a product but NOT this product. ZERO drone."
"But it is the Perfect resonators for guys/girls who want performance and tone, or anyone who wants there car to sound amazing at WOT or when you step on the gas, but want the cabin to remain bearable with little to no drone."
"Car sounds the same at idle and low rpm but the drone is almost completely gone!"
"After installing, it was way louder than stock and produced an annoying drone at 1500/2000 rpm. Overall the exhaust is about stock sounding, just a little deeper and there is no change in performance."
"It was a commitment to cut into my beautiful exhaust system to install this, but I am glad I did."
"Another thing I shopped all around for a better price but I couldn't find one better than what was listed by this seller here in Amazon. The item arrived on time and was packaged in original boxed, meaning you get what you pay for not some eBay after market special."
"It did quiet my exhaust (350 V8 w full headers and no cat) by 30% imo."
Best Automotive Performance Carburetor Needle & Seat Assemblies
The weight is approximately 0.03 pounds and it is not adjustable and spring loaded. Includes a pair of spring loaded needles and seats.
Reviews
Find Best Price at Amazon"No matter how I set the floats it always starved the carb for fuel."
"this really helped to stop my jeep from flooding."
"The (2) long mixture needles need to go into the base with a little jiggling so they must be loosened at the top first."
"all parts were there..seemed to go in just fine, Thanks."
"I bought this kit to try to keep my Edelbrock carb from stalling around corners."
"Don't know if it was the spring loaded needles or just resetting the floats correctly, but my 37-year-old plow truck has stopped stalling while going forward up steep inclines."
"Why the heck didnt edelbrock just install these from the factory on all their carbs?"
"I put these in all my truck carbs."
Best Automotive Replacement Carburetor Needle & Seat Assemblies
The Holley inlet needle with a Viton tip features an adjustable 0.120" seat size. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Shopped for this product everywhere and found it here."
Best Automotive Performance Carburetor Return Springs
It's matching steel brake pads mount with a 1/2 - 20 stud built into the back of the pad. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Pedal fit just as it should, easy to install and adjust!"
Best Automotive Replacement Exhaust Heat Shields
DEI Titanium exhaust wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and woven into a proprietary weave. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. By wrapping the exhaust, the additional heat can make the titanium alloy turn brittle and prone to premature cracking. Reduces temperature & vibration breakdown. High resistance to abrasions, oil spills, temperatures and vibration breakdown.
Reviews
Find Best Price at Amazon"Supposed to regulate the heat to slightly increase performance... who knows if it does. I wanted to run these pipes without the heat shields since the bands snapped and rattled around. Results: I like the look and the heat seems to dissapiate evenly throughout the pipe now."
"Though it is still very warm it will no longer burn you."
"In my opinion, this is a must for RAM 2500 trucks to insulate near your transmission to keep your transmission fluid temps down."
"One other thing to note from my research, one of the cautions with exhaust wrap is that with the temperature difference on where your wrap ends up ending, there is a possibility of the exhaust pipe cracking or becoming very brittle."
"With a couple hose clamps and about 10minutes I was able to completely wrap the midpipe on a 2006 Honda CBR600RR and what I feel to be very nice results."
"UPDATE Oct 16th. Worked excellent for 600 miles, till I saw what the redirected heat was doing to the rest of the exhaust system."
"I used this to wrap the exhaust on my 2014 Yamaha Grizzly 700."
"I have an RV that had large heat shields screwed into the exhaust pipe under the chassis to protect the plastic storage boxes from heat."
Best Automotive Replacement Carburetor Return Springs
The Edelbrock Carburetor Step-Up Spring Kit contains one of each 3 Hg (blue), 4 Hg (yellow), 5 Hg (orange), 7 Hg (pink) and 8 Hg (plain) springs. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Factory 1406 comes with YELLOW springs."
"I had a nasty flat spot on my 1972 c20."
"I used the heavy set of springs,cured my stumble at lite throttle at 2000rpm.No more lean miss."
"They do make a small difference but the carburator itself isn't so great."
"I recently added an Air/Fuel Ratio gauge to my Street Rod and these are just what I need to get my carbs dialed in perfectly!"
"Problem solver."
Best Automotive Performance Carburetors & Parts
The Edelbrock Performer Square Bore Air Valve Secondary Electric Choke New Carburetor features a two-piece, all-aluminum construction for cooler operating temperatures and less warping. Primary venturi booster is a bottom feed design for smoother acceleration and better drivability.
Reviews
Find Best Price at Amazon"Runs like a horse, would recommend."
"Car started right up after fuel reached the component."
"My boat weighs 5000lb empty but with all my diving gear it'll do 47 mph with 4 divers and 2000 lb of diving gear...very pleased, i would recommend and if needed i would buy another."
"KSearched High N Low did some investigation and this product is the best for the price."
"Working on a classic '66 F-100 and just as other reviews have indicated, bolted on and updated the fuel lines with provided filter, as soon as fuel got to the carburetor the motor fired and ran perfectly."
"Product was just as described."
"Tuned decently.. hooked up to pre existing holley carb hardware okay as well.. didn't get anything shown in the picture although... just the carb."
"Nice replacement for worn out carbs."
Best Automotive Performance Power Valves & Gaskets
This single-stage standard flow power valve boosts your vehicle's power when pulling heavy loads or at fast speeds. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Works as advertised in Holley marine carb."
"Exact part I needed."
"this power valve solved all my issues."
Best Automotive Performance Carburetor Service Tools
The Edelbrock Uni-Syn Carburetor Balancing Instrument is a precision instrument that provides a visual method of balancing multiple carburetor setups with a high degree of accuracy. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"It folds down nicely for storing back in it's cheap paper box and bubble wrap."
"The reason I am giving it 4 stars is that it does not say Edelbrock anywhere on the device and the instructions look like a photo copy of an old instruction."
"Unfortunately, I lost my original uni-syn tool that was made in England and I was expecting this Taiwanese part to be made from some ridiculously cheap casting."
"Awesome tool, when you don't have vacuum ports to sync."
"a must when u have to calibrate a carb."
"Used it to sync the carbs on my MG. Now it runs a lot better!"
"Not quite what I had in mind, but I'm sure it will do the job nicely, my friend has one which is slightly larger in diameter and I thought they were all the same."
"The top segment of the indicator arm which connects the vacuum passage to the glass indicator tube, has a seal to the glass but nothing to the passage. Having de-burred and lapped the swivel joint and installed a soft gasket at the top of the indicator tube, the indicator will now just rise at about 1100rpm but not at tickover - 800rpm."
Best Automotive Performance Carburetor Rebuild Kits
This carburetor renew kit brings marine carburetors back to original specs and like-new condition. Includes O-rings, pump diaphragm, needle and seat, and power valve.
Reviews
Find Best Price at Amazon"Ordered this rebuild kit a while back."
"Note this is for 4160 series carbs if you have a 4150 series ( a visible metering block between the carb."
"The "step by step" instructions consist of and exploded view that "may not be completely accurate for your carburetor" and instructions to disassemble in general in numerical sequence."
"My step dad is a mechanic.."
"Comes with blue gaskets so you don't have to fight with stupid cork when you do jet changes or power valve later on."
"Ton of parts for every thing under the sun -worked find but boy talk about everything for every carb..."
"Has everything you need with plenty of extra gaskets to rebuild any carb made by holley."
"call Holley before buying this - this absolutely does NOT work with ALL 4160 carbs ... came in a nice box though."
Best Automotive Performance Carburetor Hot Idle Compensators
It offers enthusiasts a straight-forward carburetor designed to deliver a stable idle, amazingly crisp throttle response and smooth performance. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I wired it to kick on when AC Compressor comes on."
"Prefect fit and works great."
Best Automotive Replacement Carburetor Service Tools
The Pro-Synchronizer will not restrict airflow and feature an easy to read 1-30 kg/h numbered scale for precise synchronization. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"This item should have more information about whether or not adapters would be required."
"I hate having to go on line and look at videos as people use it differently."
"Works great simple tool to use. An inexpensive and must have tool for the money, recommend to all (D I Y selfers) & mechanics!"
"You will need to remove any air filter connectors or baffles so the unit will have direct access to the carbs for most accurate readings."
"I use this for my 65 bug and it works great."
"The Pro-Sync worked great to sync my Weber 34 ICT dual carbs."
"The adaptor that comes with this device fits neatly inside the throat of a Carter or Stromberg two barrel carb."
"This works perfectly to sync my multiple carbs on my hot rod VW."
Best Automotive Replacement Carburetor Rebuild Kits
This is a Replacement Carburetor for Tecumseh 640350, 640303, 640271. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"After cleaning the carb, and reassembling (with a sketchy looking bowl gasket), I noticed that this hadn't helped my 'starting' problem and instead made it worse; I now had a small gas leak out of the carb bowl. I used the following items: Carburetor MaxPower 13566 Carburetor for Tecumseh 640350, 640303 and 640271. Ignition Coil NEW TECUMSEH 34443 34443A 34443B 34443C 34443D IGNITION COIL SOLID STATE MODULE. Air Filter Oregon 30-031 Paper Air Filter Tecumseh Replacement Part 36905 2-3/4-inches by 1-3/4-inches by 2-7/8-inches. Fuel Line Hose Clamp Stens 120-251 Hose Clamps."
"These are excellent generic carburetors that fit perfectly on a Tecumseh engine used to power a common Toro Recycler GTS. A couple hints when changing these carburetors on a Toro GTS: - Fully remove the muffler connected with two bolts. Governor adjustment is easy and is typically misaligned due to the delicate spring becoming damaged or stretched during carburetor removal."
"I took way more than 20 minutes (more like 3 hours) but that's only because I didn't know what I was doing and had to carefully analyze everything, plus make a couple trips out to the store to replace the fuel line while I was doing this. I don't know enough to blame the carburetor for it, although that could be it... it could also be the mower is 16 years old."
"Simple install: remove muffler, remove old carb with intake manifold and linkage, remove fuel line and vent from old carb, separate old carb from intake manifold, transfer intake to new carb, transfer the air cleaner plate and re-install the new carb in reverse order of removal."
"Easy replacement (clean the engine well around this area before starting)."
"This was a replacement carb for the original factory installed carb on my Toro lawn mower that got a terminal case of the "leaks"."
Best Powersports Exhaust Heat Shields
This reflective heat shield tape withstands 1100F continuous radiant heat (requires minimum of 1 inch of airspace) and 500F of direct contact. Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent.
Reviews
Find Best Price at Amazon"Although this product does a good job of shielding heat, I gave is 3 stars because the adhesive on this tape is of very poor quality."
"It was a pain to wrap this on the cat on my ford explorer but i can blame that on ford."
"Expensive but we'll made."
"Good tape."
"As a number of people said, it don't stick for long, however trying to stick it on the thing that actually gets hot is a no no."
"Used this on the underside of my ATV plastics to deflect heat away from them and it was a pain to get the backing off. It has been a bit longer now and more and more of this stuff is separating from the backing."
"The adhesive sticks well, but after the first 30 minutes of use, the fiberglass/aluminum backing fell from the tape, causing the tape to be exposed to the heat, melting, and subsequently smoking because of the exposure to the heat."
"If the electrical tape melts then I am back to square one, as this tape will NOT stay in place on its own."