Best Engine & Oil Fluid Additives
Where they start to experience static friction and fail to operate in proper time, this has become known as a "Stiction" issue for these engines. Stiction Issue in HEUI Injectors & Turbo Chargers Can be Repaired.
Reviews
Find Best Price at Amazon"I have a 04 Ford F-250 diesel 6.0, recently the truck during 3/4 throttle pull popped the top of the oil filter cap. We never figured out what caused the issue, but we did do a full oil change and replaced filter and cap with motorcraft products. I’m sure glad I did because what I thought was going to be an injector replacement job ended up just being a stiction issue and now all my issues are gone."
"Truck sounded rough on cold start and would buck until oil got hot, but there were not codes. Truck now idles SMOOTH -- enough of a difference for a couple of my friends to comment on how much better it runs."
"I purchase this to cut down on the stiction issues during these colder months, but this also eliminated the constant black cloud."
"I know my injectors need to be replaced but even at $65 extra per oil change that's a lot cheaper than replacing the injectors."
"Keeps system running smooth in cold weather, and eliminates any striction problems."
"After some research I was hearing it was most likely stiction in the injectors, and that I should try REV X. While the price made me cringe, the price of new injectors made me take the gamble."
"I was experiencing some stiction issues with my diesel truck's injectors and after adding two bottles of REV-X following my last oil change, it has noticeably smoother idle and sound."
"This product really works."
AR9100 is a Nanoborate-based oil additive which forms a solid boundary lubricating film to reduce friction and provide anti-wear, extreme pressure and anti-corrosion protection to engines, gearboxes and hydraulic systems. How AR9100 Works AR9100 is absorbed on metal friction surfaces where it forms a protective solid boundary lubricating film. AR9100’s solid boundary film also provides outstanding extreme pressure and anti-wear protection to friction surfaces during extreme operating conditions (falex test failure at 4,000 lbs) including cold starts, heavy loads and high temperature conditions. For gasoline and diesel engines, gearboxes, hydraulics, differentials and power steering systems.
Reviews
Find Best Price at Amazon"Recently with the cold it was getting a hard to start below 30 and would run ruff for minute or two, no block heater. Fires right up, no bucking or ruff idle, runs just like it's fully warm."
"Not a miracle additive as some claim, but it did seem to work."
"Must have if you have a 6.0 powerstroke."
"Good stuff, improved engine quality and fuel economy in my 1990 7.3 IDI diesel, But this stuff is RIDICULOUSLY overpriced."
"Works just as it says it does."
"Run it in my truck and mowers, I am a fan."
Sea Foam auto marine motor treatment, 16 fl. Special Shipping Information: This item cannot be returned and has additional shipping restrictions. Special Shipping Information: This item cannot be returned and has additional shipping restrictions.
Reviews
Find Best Price at Amazon"I used one ounce per quart of oil and drove approximately 150 miles in order for the product to clean the engine."
"I use it routinely in my lawn equipment and in all three of our vehicles."
"I used it to help start my off season power tools (lawn mower in spring and snow blower in winter) that sit for months."
"The Sea Foam helped unstick the float in the carburetor of my snow blower, and that saved me a ton of hassle and money."
"The motor would run rough when I was trying to idle."
"Truck (Ford Ranger) was idling uneasy."
"Super easy to use - just dump it in your fuel tank before you fill up."
"Very expensive, but it is one of the few engine additive products I seem to be able to tell a difference when using."
Best Oil & Fluid Additives
Sea Foam auto marine motor treatment, 16 fl. Special Shipping Information: This item cannot be returned and has additional shipping restrictions. Special Shipping Information: This item cannot be returned and has additional shipping restrictions.
Reviews
Find Best Price at Amazon"I used one ounce per quart of oil and drove approximately 150 miles in order for the product to clean the engine."
"I use it routinely in my lawn equipment and in all three of our vehicles."
"I used it to help start my off season power tools (lawn mower in spring and snow blower in winter) that sit for months."
"The Sea Foam helped unstick the float in the carburetor of my snow blower, and that saved me a ton of hassle and money."
"The motor would run rough when I was trying to idle."
"Truck (Ford Ranger) was idling uneasy."
"Super easy to use - just dump it in your fuel tank before you fill up."
"Very expensive, but it is one of the few engine additive products I seem to be able to tell a difference when using."
Best Engine Flushes
Liquid Moly's Pro Line Engine Flush is a highly effective detergent additives in Engine Flush clean interior engine before oil change. Add to engine oil before engine oil change. Easy way to clean and flush the oil systems of gasoline and diesel engines.
Reviews
Find Best Price at Amazon"I went and got the oil filter and oil I wanted to use which was for high mileage. I was amazed at how dirty black the oil was and seeing little pieces oil dried oil from the inside walls pour out."
"Not shore if it was do to previous owner not doing maintenance on time and neglecting the vehicle Mechanically ."
"I had originally purchased this product in hopes that it would free up what I thought was a sticking lifter on my 2009 legacy with 150k miles."
"I did an oil change anyways with this flush and the oil was really dark."
"Cleared all the little passage ways and helped the oil work the vvt better, CEL gone."
"effective engine flush, will be using more of this, thanks."
"This stuff really works!"
"good product, removed a lot of gunk from engine."
Best Powersports Engine Oil
We selected the highest-quality base stocks and created an additive package specifically designed for the unique requirements of motorcycle and ATV engines. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I am not a racer, but enjoy riding local trails and have put alot of miles on my bike lately."
"Strongly recommed for all Honda motocyles and probaly all Japanese motorcycles for that matter."
"I have been told by a Honda engineer, keep using the same oil."
"I've stuck with Dinosaur oil in my Honda bike."
"I have a vtx1800 with less than 12000 miles on it and my first 2 oil changes and all future oil changes will be with this oil."
"Good oil had a good price."
"This is exactly what you'd expect from the description."
"Got for my Honda Rancher 4x4 420."
Best Transmission Fluid Additives
Honda Genuine 08200-9008 Automatic Transmission Fluid ATF DW-1, 4 Quarts. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"It's been the only thing I use so far."
"Replaced transmission fluid on a 2009 Civic that had hesitations during shifts (135k miles)."
"My transmission started to grind and slip."
"Oem oil so what can one say, I bought because of the price and free Prime shipping, how can one beat that, delivered to your door."
"Face it: Honda Auto Transmission fluid is expensive."
"Works well."
"Only use Honda ATF in your Honda!!"
"Really smoothed out the shifts on a bit older Acura."
Best Hydraulic Fluid Additives
Fluid Film is a rust and corrosion preventative, penetrant, and lubricant. It is a non-toxic, long lasting, thixotropic liquid that has been used for over fifty years in the highly corrosive marine environment of ships and offshore drilling rigs. Fluid Film is formulated from specially processed wool-wax, highly refined petroleum oils and selected agents to provide corrosion control, penetration, metal wetting and water displacement. The long lasting product contains no solvents, will not dry out and will penetrate to the base of all metals, providing corrosion protection from both natural and industrial atmospheres.
Reviews
Find Best Price at Amazon"NAS is the consistency for car undercoating."
"This is great stuff, if you have corrosion or just want to lube a moving part, trust this product, discovered it just a few years ago and now won't be without it."
"Great stuff."
"easy to use cleaned up well just have to wait and see about the rust."
"good stuff at a good price."
"I have been using this product for almost two years and it has been a great under coating for vehicles, plows and work equipment up here Maine...where they love to salt roads enough to actually make them white at times."
"The fluid film was delivered promptly and show last me quite a while."
Best Power Steering Fluid Additives
Lucas, 12oz, power steering stop Leak, removes hard spots & stops most leaks or your money back!
Reviews
Find Best Price at Amazon"Love this stuff."
"This really by far has fixed my issue with steering problems that I have been having in the past with putting in fluid and have to keep refilling it and now after filling up my power steering fluid with this I been having no issues now for weeks."
"I used this product to stop a leak on the power steering rack on my Mazda MIata. Well, I really didn't want to spend that kind of money, so I figured for around $8.00 I would give Lucas Oil a try."
"Helped slow it down and it's color let me know it was a power steering leak."
"Put 8 oz in the trans, behaving better, less slipping and buzzing/whine( i may just buy the 24 oz trans fix and drain a quart off after all, and see how that goes.)."
"Fixed a small leak in round the rack of my car."
"Good stuff really helps with leaks."
"Used it on my Honda Pilot and seems to help!"
Best Fuel System Additives
Because it provides efficient removal of upper engine deposits, this product reduces problems caused by deposit build-up such as engine surge, stalling, stumble, hesitation and power loss. Fuel system cleaner quickly cleans fuel injectors, valves and combustion chambers.
Reviews
Find Best Price at Amazon"Adding 1/2 of the cleaner at two gallons and the rest at 8 gallons to make sure it mixed well with the fuel (I did get the chevron high grade fuel with Techron). I kept my RPM's high (3-4K) to burn out any carbon, etc and ran until empty."
"Litterally saved me from replacing them in a car I owned many years back."
"BG makes the best automotive additives in the business some think that BG is only necessary if you have a problem."
"The best for keeping your fuel system clean."
"Wow!"
"Been using all BG products in my gas vehicles for years and I use this in the gas tank every oil change."
"Added to full tank of fuel and vehicle performance has improved noticeably since then."
"My fuel injectors were clogged to the point that I couldn't redline."
Best Cooling System Additives
BlueDevil Head Gasket Sealer will repair and seal leaks in blown head gaskets, warped or cracked heads, heater cores, and freeze plugs. Contains no solid or particulate matter that can harm a vehicles engine.
Reviews
Find Best Price at Amazon"This is because there is combustion gas constantly leaking into the coolant system creating a vapor lock in the heater core. Because of the high mileage I didn't want the expense of doing a head job, so decided to give Blue Devil a try. After 3 days driving I drained the coolant down, keeping the liquid, put the thermostats back in, then added enough anti-freeze for a 50/50 mix. Engine runs great, there are no misfires, no loss of coolant, no excess pressure and there is ample heat from the heater core with the car at idle. This is supposed to be a permanent repair so real proof will be how it holds up over time, including the upcoming winter. Prior to the Blue Devil repair, air/combustion gas would be trapped in the heater core meaning no heat inside the car unless RPM's were very high. I would not hesitate to use it again in the appropriate circumstance, which would for me be a high mileage vehicle, exhibiting symptoms of head gasket failure, having a cooling system that is in good condition. Fully drain, clean and flush the cooling system first, then use the Blue Devil per instructions, additionally driving the vehicle over a few days and a couple hundred miles before draining and adding the anti-freeze back in the system (must be done in non-freezing temps of course!)."
"I took the thermostat out. Flush it with the garden hose. Refill with water leaving room for the 1.5 quarts. Pour SLOWLY the sealer. Let it Idle for an hour. Turned the engine off and let it cooled down overnight. next morning I put the thermostat back. Refilled with coolant. NO MORE ISSUES. I would totally recommend, it's been about 5K miles and no problems."
"My mechanic diagnosed the head gasket as the issue, with coolant leaking into the cylinder and fouling the spark plugs causing a misfire. I drove for about 4 weeks without a misfire until it came back today after about 500 miles...also note that I only would drive this car locally for about 15-20 minute trips max, so I can't say whether this would work for a long highway trip."
"I flushed the coolant by opening the radiator drain cock while the engine was running and refilling the reservoir simultaneously with the garden hose until the drainage ran clear. I didn't want to add it to a full reservoir because very little of it would circulate with the motor running. The good news is that the reservoir tee's into the lower radiator hose which feeds the motor with cooled liquid. I drained the radiator and reservoir (2ish gallons) and added 1.5 bottles of Blue Devil to the empty reservoir which drained it directly into the main circulation."