Best Exterior Automotive Mirrors
2, Pls clean your original car mirror with alcohol or some other cleaning products. 3, Determine the installation location, this blind spot mirrors is attached to the outside rear view mirror site, pls make sure the blind spot mirror do not exceed the edge of your car mirror. 4, When you wash the car in the future, pls fold the car mirror, because the water pressure is very high and flushing compound may effect the stickiness of 3M tape. Car wash is not recommended within 24 hours after you install the blind mirror, to avoid damage to the viscous. 2, 4 packaged rather than 2 like most, 2 for your rearview mirror, 1 for your inside rear-view mirror, 1 for standby. 4 piece packaged, newest upgrade 360 degree rotate + sway adjustabe, maximize your view with wide angle in car. 2" HD Glass curved male face frameless ultrathin slim design, equip with 3M adhesive for pressure-sensitive tape installation.
Reviews
Find Best Price at Amazon"I purchased this one because there is no bezel that takes up space when the rear view mirror is already so small and you'll need whatever space you can get."
"It uses 3M brand adhesive pads which stands up really well to rain and car washes, and it is also a very fair price for a pack of two. I recommend taping it in the spot you want and driving around the block to make sure it's where you like it."
"It's a good size for the corner of my monitor and the wide angle gives me a perfect view of what's going on behind me in all directions."
"I drive an SUV and while I have great visibility out my windows, I wanted the extra perk of having blind spot mirrors. If I ever want to remove the mirrors I plan to use a razor blade to scrape off what I can, followed up with some Goo-Gone or WD-40, both of which should help dissolve the adhesive and completely clean the glass. They're good parking mirrors and don't block my normal view at all, so I see no reason not to have them on my vehicle."
"Because the swivel mount makes the blindspot mirror stick out from the car mirror, your car mirror reflects the backside of these little mirrors reducing what you can see from your car mirror (shown in the picture but it's much worse, especially on a smaller sedan mirror)."
"not exactly satisfied but that has nothing to do with the product, just i haven't found the right placement."
"Works well but don't drop it like my sister did when installing."
"It works great by providing clear vision, you can adjust the angle easily and it is very firm so dont worry it will be dislocated by rain or wind."
Package: 2 x blind spots mirror and support. 2 piece packaged, newest upgrade 360 degree rotate + sway adjustabe, maximize your view with wide angle in car. 2" HD Glass curved male face frameless ultrathin slim design, equip with 3M adhesive for pressure-sensitive tape installation.
Reviews
Find Best Price at Amazon"I purchased this one because there is no bezel that takes up space when the rear view mirror is already so small and you'll need whatever space you can get."
"It uses 3M brand adhesive pads which stands up really well to rain and car washes, and it is also a very fair price for a pack of two. I recommend taping it in the spot you want and driving around the block to make sure it's where you like it."
"It's a good size for the corner of my monitor and the wide angle gives me a perfect view of what's going on behind me in all directions."
"I drive an SUV and while I have great visibility out my windows, I wanted the extra perk of having blind spot mirrors. If I ever want to remove the mirrors I plan to use a razor blade to scrape off what I can, followed up with some Goo-Gone or WD-40, both of which should help dissolve the adhesive and completely clean the glass. They're good parking mirrors and don't block my normal view at all, so I see no reason not to have them on my vehicle."
"Because the swivel mount makes the blindspot mirror stick out from the car mirror, your car mirror reflects the backside of these little mirrors reducing what you can see from your car mirror (shown in the picture but it's much worse, especially on a smaller sedan mirror)."
"not exactly satisfied but that has nothing to do with the product, just i haven't found the right placement."
"Works well but don't drop it like my sister did when installing."
"It works great by providing clear vision, you can adjust the angle easily and it is very firm so dont worry it will be dislocated by rain or wind."
The RM10 Blind Spot Mirror will fit specifically stock mirror numbers Auto Dimming: 68079362AA (Right) 68079363AA (Left) Non-Dimming 68050296AA (Right) 68050297AA (Left). Custom Fit to match 4th Gen Ram Trucks with non-towing mirrors.
Reviews
Find Best Price at Amazon"These mirrors rock they fit perfectly and look awesome."
"If anyone is asking or looking for blind spot mirrors for their 4th gen ram, send them to Wade."
"Mirrors look nice and add fuctionallity and style to the factory mirrors....quality is great and Wade, the owner, is awesome and provided exceptional customer services and response time."
"After ordering this set, I find myself FIRST checking the blind spot mirrors as the viewing angle gives a significantly better picture of your surroundings, and the regular mirrors seem sub par after the fact."
"I had these mirrors on my old f150 and was missing them on my 2014 ram 1500. Definetely widens your field of veiw and makes backing trailers alot easier for those of us without tow mirrors."
"These are nice, high quality mirrors which fit the Ram power mirrors perfectly."
"This is by far the cheapest safety mod you can perform on your truck.. product is top notch !"
"But from the reviews I have read they are a great safety addition to the standard factory mirrors."
Best Exterior Covers
Protects for your vehicle from harmful UV rays, dirt, dust, industrial pollutants and bird droppings.
Reviews
Find Best Price at Amazon"First, it arrives in strong, sealed plastic, and then within that, a carrying bag which you can leave in your trunk, as I did. Finally, while there are grommets for a cable if you wish to use one (again, as with all the above, see attached pictures), Legend has included a nylon strap which is sewn into the cover itself. Now, the buckle that they included didn't seem to want to snag the nylon strap, but that's fine - we simply tied a not so it couldn't slide through. My rating system is as follows: Five stars is for a product that impresses me ... one that offers facets I didn't even think of in the first place. Three stars for an unremarkable product that does what it says it will, but one that lacks inspiration and has key functionality missing, and/or some flaws."
"Although it has a strap under the vehicle to secure it, I avoided using knots and used a cargo strap so I could cinch it instead."
"Excellent quality."
"Bought this for my 1988 Nissan Pulsar project car."
"Has a nice feature where you can clip it underneath the car."
"It came vacuumed sealed an I had to work to get it over my 1995 Honda Civic."
"Have a Chevy Volt 2017 and the 15' fits perfect."
"Was looking for cover to keep our somewhat feral cat prints off the wife’s Lexus."
Best Automotive Body Armor
HAND MADE from BEST QUALITY MATERIALS - DURABLE WATER RESISTANT FABRIC GUARANTEED for long life plus ZIP STORAGE BAG - Keep in all autos and recreation vehicles as usable outdoors picnic sheet, tent sleeping pad, baby crawling mat or pet car seat cover - GREAT GIFT IDEA.
Reviews
Find Best Price at Amazon"i made sure to put the covers on my car before the snow began to ensure that wetness/snow did not get between the cover and my windshield (i read horror stories online of other models getting stuck/frozen to your windshield that way."
"I got this Car windshield snow cover on the day of a snowstorm.. talk about perfect timing! The snow cover comes with a instruction sheet that shows exactly how to place it."
"The magnets on top stick tightly, and the hooks for the wheels means the wind can't blow it away."
"Works very well on 2010 CRV."
"I loved it all...no negatives...at age 72 I put the cover on the front windshield of my cruze & best part is that it completely covered where the windshield well is & the next morning the window was crystal clear & no ice anywhere on or around it..i liked the way the side straps anchored to hub caps w/ hooks...sides tucked inside Windows & were held in place w/ suction cups."
"What good is a clean windshield if your wipers are frozen to it or the car?"
"The magnets vary in strength, which results in a cover that lifts every time the wind blows (obviously a bad idea in snowstorms or icestorms)."
"However, the main reason why I won't be continuing to use it is that when the magnet drags across the hood of your car, it leaves scratches that are very visible and unable to be buffed."
Best Automotive Vinyl Wraps & Accessories
Simply warm the vinyl with a heat gun, and it will easily conform to the tightest curves. At 3.9mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum. This product has built in VViViD Air Release, VViViD Resist, and VViViD Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality.
Reviews
Find Best Price at Amazon"Turned my black in color wood desktop from looking weird, having stains from cups and such and having chips and the black paint peeling off to a nice feel good, constant same texture and for the cups I do leave that then leave wet marks all I usually have to do is just grab a napkin and wipe it off..."
"I had contacted them phone as I was told and ended up ordering a new wrap."
"This vinyl is real Vvivid vinyl, no the fake stuff, it is also xpo, meaning the adhesive is better."
"I can't believe how easy this is to use, and how well it stays where you put it."
"I did my car roof and its hard to work with especially if you are doing a large area for the first time."
"Finished project came out great."
"Awesome wrap, which I am using to wrap wood panels."
"Got the item in a wrapped bag as a real reseller would do and it works great."
Best Spare Tire Carriers
Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"This is the 2nd spare tire I purchased because the 2013 through 2015 cars did not come with the spare tire."
"Spare tire kit fit perfect for my 2016 elantra ."
"Provides peace of mind when traveling long distances or when your way off the "beaten path" and cell phone signals are non existent to call for roadside assistance!"
"This kit even had a new label to install on the driver door jam to show that the car now has a spare tire and inflation info is shown as recommending 60 psi."
"Shame on Hyundai for sailing their cars without spare tire!"
"This has cost me time, money and a great deal of frustration on two occasions."
"Who knew spare tires were an option on modern cars."
"Arrived quickly and my husband had it in the truck in no time."
Best Trailer Accessories
Diagnostics show output current, battery, brake, and output voltage and warning system alerts to No Trailer Brake situations.
Reviews
Find Best Price at Amazon"Tow vehicle: RAM 1500 Hemi Lonestar Crew Cab. Parts used: Tekonsha P3 Proportional Brake Controller purchased from Amazon. Tekonsha 3024P RAM Brake Control Wiring Adapter purchased from Amazon. (used to plug into factory installed wiring under dash). Total Expense: $151.45. My 2016 Ram 1500 Hemi Lonestar didn't come with the integrated brake controller. After searching all the RAM forums and studying Amazon reviews, I decided on Tekonsha P3 controller, and not to shell out the $440.00 my local dealership quoted to install the OEM. There's one video currently on YouTube that gives a breakdown how to remove the full length center console to install the OEM controller, but even then, you still have to have the dealer flash the computer so it all works together, and all the functions appear on the screen above the steering column. I knew I wanted a clean, and minimally invasive install, so a little thought was needed to snug it up to my center console. Instead, I used two very thin diameter toggle bolts I had left over, put them through the controller bracket with washers, screwed controller to the bracket, pushed the thin bolts through pre-drilled holes I made, and screwed the wings on from under the dash with some washers. :). I might add before I started my project, I checked under the dash for the two factory installed connectors wrapped in foam tape."
"The fact that your trailer may well weigh more than your tow vehicle... And that moron that just jumped in your lane then slammed on his brakes... This is NOT the time to think to yourself, "maybe I should've gotten a better brake controller." Prior to digial sensors, the downhill slope would throw off the pendulem and the brake controller either would send a weaker current to the brakes or none at all. Just like any other accelerometor...it senses the volume deceleration and then computes an appropriate voltage and current to send to the trailer brakes based on a percentage of the user's max output setting. With no brakes connected, this unit will dispay the default "Tekonsha Screen". Once brakes are connected via the trailer plug, the unit will display the "Tow Screen". Setting the max brake power is a snap with the two "Up" and "Down" buttons on the left side of the face. This bottom mounted spring loaded slider switch will manually add braking power to the trailer brakes (up to the user set max) even without depressing the vehicles brake peddle. This is a standard feature on all brake contorllers, but I wanted anyone looking for their first brake controller to understand what this was. Generally an indication of a poor trailer connection at the wiring harness or a problem with the brakes themsleves. There are 4 levels of boost for trailer brakes. Boost adds a brief (fraction of a second) burst to the trailer brakes which slows the trailer slightly more than the normal pressure would and keeps it from bumping or pushing the tow vehicle when brake pressure is initailly applied. The unit will power down after 15 mins with no trailer connected AND no input from the brake signal wire. It lets you view diagnostics on the fly and over the road that can give you four digit readouts of battery voltage, stoplight (brake input signal) voltage, brake voltage, and brake current. This screen alone is worth the cost of this brake controller! When you first connect your tailer do some tests and record the max input you set, the output under normal braking conditions, as well as the brake voltage and amperage. A 12V input from the battery (running thru a 30A auto reset breaker NOT a fuse), an output to the brake pin of your 6 or 7-way trailer connector, a stoplight input running to your vehicle's stoplight switch behind the brake peddle, and lastly a frame ground. Make sure for your safety, your families safety, and the safety of all those on the road you buy the brake controller that does it's job the best. As you let off the brake the trailer will brake slightly heavier than the tow vehicle and when brake signal ceases the vehicle will jerk a bit as the trailer stops braking. This is a safety feature to keep the trailer from pushing against the tow vehicle and thus not to loose control when braking."
Best Window Louvers
These side window covers feature a stepped louvered design that will give any 2015-2017 a more aggressive appearance. Quarter window louvers are designed to attach to the factory C-Pillar glass with the supplied 3M doubled sided automotive bonding tape for a quick and easy installation. Fit for 2015-2017 Ford Mustang All Model.
Reviews
Find Best Price at Amazon"The stock Ecoboost Mustang looks a bit plain (in my opinion) and these definitely help you differentiate your car from the rest!"
"fits very well on test fit will install after being painted adds a little class."
"i advise you to wipe down with alcohol where the tape will be placed (plastic and glass)."
"Good product if the color matches car."
"Got these for my Race Red 2015 EcoBoost Mustang and I have to say they look awesome."
"Almost paid over $100 for a pair of these."
"Part is cheaply made knock off of Cervini's window louvers."
"Do not waste your money!"
Best Bumpers & Bumper Accessories
This is a Brand New *CHROME* Rear Bumper Assembly For Your 1999-2007 Silverado/Sierra 1500! Includes Impact Bar, Step Pad, Brackets/Braces, and Hardware.
Reviews
Find Best Price at Amazon"I had to contact the company with a technical question and I was amazed that a knowledgeable human being actually answered the phone and was very helpful."
"fast shipping from MBI auto."
"As far as I can tell this bumper is an exact duplicate of the optional factory installed chrome bumper."
"This bumper came with everything needed to easily replace the old one."
"My husband bought this to replace a bumper on his truck that was rusting and had a small dent."
"My bumper arrived on time and had everything I needed to install on my truck."
"complete with everything you need."
"Brackets did line up had to use the old ones to mount it, box was all torn up when received, bolts thrown everywhere in box, this is not the same as the OEM."
Best Emblems
4pcs C023 56.5mm Car Styling Accessories Emblem Badge Sticker Wheel Hub Caps Centre Cover TOYOTA COROLLA RAV4 Camry PRIUS REIZ VIOS YARIS EZ. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"It has been almost a year since we bought new generic hub caps and the Benzy 4pc car styling Toyota sticker plates. In the last year we have driven nearly 25000 miles, on rough roads, freeways, dusty dirt roads and more and we have not lost one single center insignia."
"They are larger than the center indention in BDK Toyota Corolla Hubcaps Wheel Cover, 15" Silver Replica Cover, OEM Factory Replacement (4 Pieces) and they are curved so only the very edge of them sticks to anything, I dont expect them to stay on long."
"I bought one set ( 4pcs) replacement without the hub center covers and just paid $26."
"These emblems made my OxGord Hubcaps look like the hubcaps that came new on my 2005 Camry!"
"Pealing off one month after installation (surface was super-cleaned with water and IPA then and dried before installation."
"These look way better than vinyl stickers."
"These are a great finishing touch for the wheel covers."
"I initially gave these 5 stars for appearance however, I attached the decals to the hubcaps that were recommended and they fell off while driving."
Best Antenna Toppers
The Stubby Antenna for MINI Cooper will fit any MINI Cooper, Cooper S, Convertible, Countryman, Clubman, Coupe or Roadster. If The Stubby Antenna for MINI Cooper is sold out, try our CRMC Series Stubby! The Stubby is designed to match the factory base perfectly so it looks as good as the stock antenna on your car. Machined out of billet aluminum & then powder coated with a durable black textured finish that will not fade break or chip.
Reviews
Find Best Price at Amazon"I assumed I could use the short antenna from my 2013 Clubman, but I was mistaken :(. Immediately I jumped onto AMAZON and found this Stubby Antenna."
"I noticed presets that were fine with my old Mini antenna were now coming in not quite as strong."
"With the Stubby, I hear more static than before."
"I am not sure how AM reception compares to the longer whip but AM reception is better than no antenna at all - we don't listen to AM that much so I can't really make any strong declarations beyond that... installation was easy though I had to provide my own metric hex to put the M6 stud in - this comes with M5 and M6 threaded studs so you have to make sure which will mate with your car's antenna socket."
"This is actually my second Stubby Antenna that I've owned."
"be careful how much of the threaded nut you have in the antenna and in the base, too much one way or the other and you can lose it!"
"My original antenna broke off one day on my way home... or some transients broke it off."
"So I installed a new antenna base and figured I would try using the CravenSpeed antenna instead since my other was damaged."
Best Deflectors & Shields
Additionally, the product keeps the sun out of your eyes, enables fresh air circulation to eliminate stale, smoky air and allows you to keep your window cracked while parked, keeping the interior cooler. The in-channel's patented design easily secures into the window channel or along the rubber seal with pre-applied 3m automotive tape. Patented design enables easy installation and assured functionality.
Reviews
Find Best Price at Amazon"i love it and it look clean on my New TacomaAVS 194768 In-Channel Ventvisor, 4 Piece 2016 OFF road dual cab, if you are looking for Air vent on your new Tacoma off road dual cab. i recommend this product..."
"I put them in because I really need them and I figured another set would be the same, possibly worse based on some of the pictures on here ."
"Very easy to install, done in about 10 minutes."
"All was well until I got to passenger front window, I found visor flange was cut 1/2 inch too long towards rear of visor."
"These look really sharp on my specific rig but I have to ding them a star because they came to me scratched in several places."
"Easy to prep and easy to install."
"I was really impressed by how easily the ventvisor went into place."
"Then while test fitting, I noticed that the front driver side piece was broken and the only reason it was still held together was because of the tape."
Best Horns & Accessories
The decibel scale is logarithmic and therefore the sound pressure doubles for every increase of 3.3 points, i.e. a horn with 118 dB produces approximately seven times the sound preasure as a stock horn. Loud and powerful Dual Supertone Horns add a level of safety to your driving with 118db(A) of sound.
Reviews
Find Best Price at Amazon"Other than buying factory replacement horns for a vehicle whose horn sound you like, buying horns based on an expectation of a certain sound or tone is actually quite difficult. They really sound like Mercedes Benz horns from the 1970s - early 2000s. Also note that these horns are actually quite large and may not fit where thd original horn was mounted. Fabricating mounts and installing all wiring to and from the horns and relay took a few more hours. Hella Relay Wiring Instructions: These instructions are for vehicles where the horn button supplies power to the horn when depressed and the ground is constant. Terminal 85: chassis ground. Terminal 86: intermittent positive lead FROM steering wheel horn button TO original horn. Terminal 87: output TO new horns. Terminal 30: 12v constant with fuse 15A. Please Let me know if this review helps."
"Added these to my 2000 Jeep Cherokee after my OEM horns finally gave up."
"i just got this so is not long-term review. good price, loud sound and a good tone and it grab distracted driver attention. what more do you need. (i hope this one last unlike the cheap china models. i had to change my horn 2 times and all died in one year )."
"It took some researching to figure out the best wiring and mounting approach for these, but the install was fairly straight forward once I spent some time planning it out."
"Installed on my 370z, no instructions on wiring but there are plenty of forums and videos online to assist with that."
"I used these to replace the stock horn on my Saturn LS1."
"LOUD AS HELL, I PUT THESE ON MY JOHN DEERE 1025R CAUSE SOME DUMB IDIOT COULD NOT CARE ABOUT A LOADER BACKING OUT OF A DRIVEWAY."
"You cannot really tell how loud they sound at all from that, although you'll be able to make out somewhat how the "distinct" noise is, with the dual tones."
Best Grilles & Grille Guards
It is custom designed to fit 07 - 17 Jeep Wrangler JK 2 Door & 4 DOOR MODELS. Includes: 1 x Xprite Front Matte Black Grille Grid Grill for Jeep Wrangler Rubicon Sahara Sport JK JKU 2007-2017.
Reviews
Find Best Price at Amazon"Wife bought me LED Halo headlights for Christmas (https://www.amazon.com/dp/B01MTXNED5/ref=cm_sw_r_cp_awdb_t1_eVIBAbYGGEQ48). and since I would need to remove the grill to install them I figured I might as well get a cool grill to throw back on."
"Love the look this gives my jeep."
"Came in the mail very fast and was in great shape, I inspected the whole piece to see if there was any type of damage but it looked like factory."
"Looks good on but did not come with clips, foam seal for hood or plugs."
"Seems to be sturdy enough, very good fit, everything lined right up, the only thing bad, it is very hard for me to reach the hood release, I have large hands so I can't get them in far enough to get to it, the winch on the bumper does not help, with the use of something I had laying around my garage it's easy to release, by the way, it's a yj with a tj grill installed."
"It's flat black, not painted but I have used lemon pledge on it as I do on my tir=ers and dash, and bug's don't seem to stick as bad."
"Looks angry, came to my office and I got plenty of comments and it wasn't even installed, kinda exciting."
Best Gas Tank Doors
Easy, no-drill installation, smooth door operation, and meets all FCA US LLC corrosion standards. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"This may or may not be a knock-off (definitely shipped from China, sooo....) but if it is a knock-off (it looks real enough) is the "real deal" Jeep one $100 better?"
"If you install wrong and have to take off the door cover, the tiny plastic tip that lines up with the hole in your jeep will break off and your cover will move/not set properly. and my OCD personality will not allow me to have a door that moves."
"The cover does not lock, however it is a factory part, fits like a glove, and looks great."
"I was a bit disconcerted to discover that my new jeep had absolutely no security when it came to the gas cap. Because of this, I wanted to at the very least hide the fact that you can just walk up to a jeep and take all of the gas you want."
"Looks great!"
"as others have stated, it doesn't sit quite as snug to the body as the original gas cap surround, but I can't really see a noticeable gap anywhere, just that you can turn it slightly side to side as much as the locating pin will allow."
"The difference between a cheap gas cover that stains as soon as gas spills on it....and a little more expensive one that can handle the heavy duty stuff."
"When I opened the box the product seemed hefty and solid and I was pleased but it went downhill from there. I had done my research on how to replace this and that helped but the design of this product was unique which made it difficult to figure out. The trick is to install from the bottom first because that flanges have a small space in between where the panel of the car slides into to hold the cover in place."
Best Cargo Management Products
Smart, rugged mesh floors make clean-up quick and easy. Durable powder coat finish resists the elements, scratches and rust. Optional light kits available: ROLA #59516 LED Light Kit or ROLA #20174 Incandescent Light Kit; Optional Bike Clips available: ROLA #59904 Dart Fork Mounted Bike Clip. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"After researching many other hitch racks, I bought this Pro Series rack for a long trip from Georgia to Utah and back. The "stinger," which is the part that slides into your vehicle receiver hitch, has an upward bend that gives the rack more ground clearance. Another advantage of the extra ground clearance is that the rack sits high enough that it is totally protected by the vehicle. As you drive, the rack is in the vehicle's slipstream, so there's no additional drag that reduces gas mileage as you drive. With some racks, you might risk having the exhaust melt your cargo bag. Buy a locking hitch pin on Amazon (https://www.amazon.com/gp/product/B0009V1WS4/ref=cm_cr_ryp_prd_ttl_sol_10), which is helpful to keep the rack from being stolen while you're spending the night in a hotel. The hitch tightener will prevent that wobble, so as you're driving down the road and hit a rough patch, you won't hear a bumping sound from the hitch rack behind you. Buy a quality cargo carrying bag to use with your rack. The bag also comes with built in lashing straps so you can secure the bag to the cargo rack. If you are looking at other hitch racks, don't get caught up in how much weight they will hold. You will also want to check the tongue weight rating on your vehicle to see if your vehicle can even withstand 500 lbs of tongue weight. As I was driving across the country, I saw many other vehicles with hitch racks."
"This is a very rugged rack."
"I like the tight mesh floor, but if you use the Pro Series 7330 Stretch Net Cargo Net it is hard to get the large plastic hooks into, so I got creative with a combo of hooking to rails and wrapping under to hooks from other side of net."
"12460 TELESCOPIC SAFETY FLAG. For legality reasons, rear side markers in the form of 1" red reflector tape trimmed to height of vertical side supports (Purchased at local hardware store but similar to the product below). Salzmann Waterproof Diamond Grade 3M Scotchlite reflective stickers. StowAway Hitch Tightener. License plate relocation with light for DOT compliance: LAMPHUS Cruizer Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75" (Includes 1 clamp). Peterson M436B Clear License Plate Light with Steel Bracket. The mounts/clamps for the license plate did not fit snug enough over the square tube, but this was fixed with a small 1-1/2" long piece of serpentine belt placed into one of the side of the mount before placing over the bar."
Best Chrome Trim & Accessories
Size: Small. Includes: (1) 1.5 fluid ounce bottle of wipe new, (2) wipe new applicator cloths, (1) headlight applicator, (1) headlight prep pad, (1) detail brush. Includes: (1) 1.5 fluid ounce bottle of Wipe New, (2) Wipe New applicator cloths, (1) headlight applicator, (1) headlight prep pad, (1) detail brush and (1) pair of nitrile gloves.
Reviews
Find Best Price at Amazon"My neighbor suggested this product when I told him that I was painting my pool equipment on the side of my house."
"I can't suggest you ignore the instructions but I found them to be a little overwrought though I do make very effort to keep this off the paint."
"Does the trick and seems to last longer than most of the "off-the-shelf" stuff we've tried - a little spendy for production work (1 kit barely restored a heavily-weathered Club Car Precedent) but if You're using it on a single project, it's definitely better than most of the goo out there."
"I tried this product on my '05 Dodge Durango...the running boards, the luggage racks were looking dull and old...I used this product, and loved the results..it really did make it look NEW, and also smell new, when I used it inside my SUV."
"Re did the plastic on an older KLR650 motorcycle."
"Be sure to clean faded area first."
"My cars door panels were all marked up and showing the signs of wear."
"The instructions cautioned against applying the product on the metal surfaces, which I heeded by masking with painters tape made for that purpose."
Best Safety Products
Mini charger with an extra USB port(2A),powers the DVR and charges your mobiles devices at the same time. – With AUTO-VOX Wireless Backup Camera Kit,you will now be able to easily park your car even in the tiniest parking spots.Without risking damaging it and ruining your day or night! Wireless Design for DIY Easy Installation – No More Complex Wiring Problem.AUTO-VOX 4.3” LCD rearview monitor connect a backup camera by a wireless transmitter.Wireless transmitter takes the place of complicated long video cables.Make all things much easier.
Reviews
Find Best Price at Amazon"The system is easy to install and you only have to run a wire to your reverse light bulb wire. **IF you have a German car or if your car has bulb sensing which means it knows if your bulb is out you must purchase 12V DC power adapter filter $6**. Once you hook up to the reverse bulb and plug in the wireless transmitter your literally done!"
"I hooked up the monitor (simply plug in to the 12v accessory jack) and then used a battery jump starter to test out the camera. If I had to say a negative to go with my praises, it would be that the connection between the camera and the monitor takes about 2 seconds for the picture to show up, it’s not instant."
"Modern design, fit in the car very well, easy installation, plug in and operate, the screen resolution is clear and the size of the monitor is definitely big enough for me to notice what happening on time and make right judgement, the lens provide a large area of view, easy to configure. The rack buckles tight and stable, leaves no worry about vibration even driving on tough pavement."
"The finished installation produced an operating system with a useful and great picture on the monitor."
"Anyone with a little knowledge of vehicle wiring and some mechanical ability can install this unit in a very short period of time."
"I wanted the wired version but i couldnt get it shipped to my house, PO Box, or my business yet i could get the wireless version 2x the cost shipped no problem... seems strange to me honeslty... anyways."
"Not sure if I'm picking up interference from something or if I need to move the transponder farther away from the tail light."
"It is really good back up camera."
Best License Plate Covers & Frames
NOTE: Please check the 6th product image for frame size.Please measure your license plate to check whether the frame bottom will obscure your plate bottom if your plate is for the following states: Oregon, New York, New Mexico, New Jersey, New Hampshise, Georgia, Wisconsin, Colorado, Kentucky, Oklahoma, South Carolina, Alabama, Idaho, Nevada, Hawaii, Minnesota, Ohio, North Dakota. For U.S. license plate: This Black License Frame size is 6-3/8" x 12-1/4".
Reviews
Find Best Price at Amazon"Good license plates for a good price for sure!"
"That way the screw goes in deeper and the cover cap click on the other."
"The hardware kit the is included was of good quality and I liked the fact that it hid the screw heads with black caps."
"The real thing to be proud of is the replacement screws with this - they not only fit the gaps on the frame, but the included screw covers make the frame a seamless part of the vehicle instead of having a few silver bolts sticking out."
"The material quality feels fine but can scratch easily if hit with debris on the road."
"Note that these frames have the little tabs at the bottom on the inside."
"I had to pop off the screw cap covers to replace a license plate and it was easy to come off and snap back on."
"These frames are great!"
Best Towing Products & Winches
Double locking pawl and tooth design for extra protection.
Reviews
Find Best Price at Amazon"I use these in combination with my Powerjack for home mechanic jobs (removing tires, cleaning parts, etc.)."
"I felt completely safe under my wife's SUV when it was up on 4 of these even though I was wrenching and pushing and pulling."
"I saw some of the reviews talking about sub-par welding, but the ones I received look pretty decent."
"I chose the "6 ton" version after reading reviews saying the 3 Ton one is not so long."
"Works very well enough to get me under my car for working on."
"These are good quality jack stands, and make working under your vehicle more viable."
"Generic jack stands."
"The hinges were rusted when they arrived and the pin holding the stopper in place was rusted out in one of the jack stands ."
Best Hood Scoops & Vents
Rugged Ridge is an exciting brand developed to provide quality and functional Jeep accessories for the growing Jeep aftermarket. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"There was no obvious way to disassemble latch and separate the locking pin. After some experimentation, I found that one end is a catch cap and you can just apply pressure to it and it will break loss. You have to remove some of the screws from the front of the inner fender, it will give you a little working space."
"I contacted Rugged Ridge customer support and after several days of going back and forth with emails and proof that I bought this from Amazon with pictures they sent me 2 new safety catches.. For anyone reading this, to reduce the risk of your safety catches breaking, I took my small butane torch and heated the plastic catch in a vise, then bent them down about 1/16", then trimmed the end back with a grinder."
"Mounting the new one is even harder.. Quality seems good and it looks and works great."
"I found out after I purchased these latches that they reportedly did not work on the power dome hood that comes on the 2013 and 2014 X models. I'll admit they are a bit tight and the latches do come close to rubbing against the hood once latched closed. I'm happy and they look vicious on the power dome hood."
"These are a quality hood latch that is extremely easy to install, especially if you are also installing new headlights at the same time."
"I would say I would buy again, however that wont be needed, good quality lasts a lifetime!"
"It took some work to get them installed, we ended up having to take apart the grill and remove the headlight to get to the place where you remove the old latches and install the new one."
Best Fender Flares & Trim
Flare Height: 5.5" in front and 4.5" in rear.
Reviews
Find Best Price at Amazon"Great quality flares at a great price."
"Great product at a great price I just ordered a second set for another truck."
"We fit these to our 2005 Dodge Ram 1500 Quad Cab sport (to hide the typical rusty fenders and also to spruce up the truck a bit)."
"Great product for the price. The stainless bolts blend nicely with my white truck, stainless step bar & stainless bed rails."
"These are my first fender flares to own and install, so I cannot compare them to the higher end flares."
"Installation was ok, took like 3 hours, because I had to move my Cummins emblem, because I had it up front, but it would probably take your average joe.... Like 2 hours."
"Finally got around to installing these this past weekend and they look great."
"It took a lot more time than I was expecting, but c'mon guys, we're working on our babies. I had to trim 3. Both driver side flares I trimmed with 320 grit sandpaper."
Best Snow & Ice Products
With the SNO BRUM, drivers can easily push even heavy, wet snow off the roof, hood and trunk without scratching the paint or harming the finish of any vehicle. SNO BRuM offers consumers a tool designed to quickly sweep snow off the car and away from the user without harming the vehicle's finish. The Sno Brum head is made of high grade durable foam and cross linked polyethylene.
Reviews
Find Best Price at Amazon"When mother nature dumps snow in Valdez, the snobrum makes getting out to play in the snow quicker."
"works great, able to reach all the way across the car and/or the top of a SUV."
"NOT SO GOOD IN SMALL AREAS LIKE AROUND MIRROR ETC."
"This is a must have snow removal tool."
"Great for cleaning off our RV."
"Gets the snow off the car without issue."
"Should have bought one years ago, try clearing a lifted jeep with an old fashioned brush its not fun but this thing makes quick work of it."
"Disappointed with the handle length of this product."
Best Roll Bars, Roll Cages & Covers
verything you put on your Jeep should match your Jeep with look, feel and quality. Specifications: Color: Black. Measurement: 9.6"x 5.0". Weight: 0.30lb. Package: 2 x Grab Handles. FIT:87-17 Jeep Wrangler JK TJ YJ CJ Rubicon Red Extreme Unlimited Roll Bar Side Grab Handle - Pair.
Reviews
Find Best Price at Amazon"ihave had many a set of grab handles for my various wranglers over the years and these are as nice as the fancy expensive ones you would get from the big name brands(rebel, rugged ridge, qtec, 4wd)."
"I am very short so getting in my 2017Jeep Wrangler Sport 2 doors, was a real pain; so those grab handles are a life saver."
"Very easy to install, and they provide. the needed stability for an more secure entry and exit."
"Grab Handles are perfect for our Jeep."
"Great product, great price, installed easily and can be mounted in many different areas!!"
"Fit great on jeep wrangler 4 Door very sturdy once installed and do not move form place A++."
"For the price, - perfect!"
"perfect fit, strong, easy to install, arrived on time and very well packaged."
Best Running Boards & Steps
TYGER Dual girder system provides maximum wheel-to-wheel protection for underside and rocker panel area from damaging impacts. Dual girder system provides maximum wheel-to-wheel protection for underside and rocker panel area from damaging impacts.
Reviews
Find Best Price at Amazon"I have absolutely beat the crap out of mine and it hasn't failed yet."
"I like how they mount to vehicle, there are a total of nine screws each side, three underneath, and six to drip rail with nuts. I’m sure if I was to have a side impact these bars would help out."
"I narrowed it down to the same number of nuts and bolts i had taken off when removing my factory installed rails. Now that they are installed.. we went off-road in sedona and since my jeep is not yet lifted we did actually get some use out of these rails."
"In looking at the other reviewers pics i wanted to mount the bracket outside of the pinched seam, but on my jeep the bolts underneath wouldn't allow me to do that."
"3 frame bolts and 6 bolts and nuts for the pinch welds on each side. Make sure you install the tabs on the sidesteps on the inside of the pinch welds and the steps will fit flush next to the body."
"I simply bent my knees, lifting the step to the jeep and put in a couple bolts to hold the step so I could get under the jeep and mount it."
"Built very solid, I believe they would allow my jeep to "slide off rocks" if I encountered the situation."
"As long as you start with the 3 bolts on the bottom first, and not completely tighten until all bolts are in, it fits like a glove without any issues. Recommend having someone with long fingers for the front and rear side nut, tough maneuver room the way the jeep is designed."
Best Bumper Stickers, Decals & Magnets
The costume includes two antlers and one red nose (17 Inches x 4 Inches x 15 Inch antlers the nose is 5.5 inches round). HOLIDAY DECOR: Bring Joy to All in the Holiday Season with Rudolf Reindeer Antlers.
Reviews
Find Best Price at Amazon"We’ve had a rainstorm and I drive for 8 hours and they stayed strong."
"I convinced my husband to let me purchase these to put on my new Subaru for this past Christmas season!"
"Love using this on my minivan during Christmas."
"Everyone loves them!"
"I’ve had these on the car for about a month and they’ve held up great."
"Great decoration for my car."
"Both antlers in the packaging were in the same side/direction, I had to twist the antler so it's the opposite of the other."
"for the price it aint bad."
Best Truck Bed & Tailgate Accessories
Patented polymer internal support system and wide stance offer excellent weight distribution and unbeatable strength. Provides reliable and convenient access to the underside of your vehicle as well as nestability for maximum storage space.
Reviews
Find Best Price at Amazon"Back at home I got myself a cold beverage, then I laid out one 33" piece, then laid a 27" piece on top of it and butted the near ends flush. I then laid a 21" piece on top of the 27" piece and again butted the near ends flush and screwed them together, being careful to drive the screws so they didn't hit the screws underneath. I then laid the 2.5 inch piece on the 21" piece and butted the near ends flush. If you want to go all out and spend four dollars, you could add another level (mine are 5.25" high) and/or lengthen the bottom piece by six inches, and then move the 27" piece back six inches from being flush, which would make a more stable base should you ever accidentally drive too far forward on them."
"For all of the uninformed weekend mechanics and DIYers that have been scared and had close calls here are 2 "pro tips" straight from basic high school auto shop."
"If you do not have the materials (wood, screws, clamps, drill, glue (if you want)), this will easily run you more than these ramps cost."
"So I'm super concerned how long they are going to last especially when the surface I put them on is not entirely flat. Also these ramps could have been made a couple inches higher so you can work under the car with ease."
"Attempted to change oil in Subaru Outback today."
"I appreciate the advice by a reviewer to avoid these ramps and to build solid ramps out of wood."
"This company is going to kill some one eventually."
"Without the rubber feet to prevent the ramps from sliding when working on a smooth driveway, it was unnecessarily difficult to drive the car onto ramps without slipping. The Rino ramps I purchased from a K-Mart retail store included the rubber feet and do not slide or slip on smooth concrete."
Best Spoilers, Wings & Styling Kits
Designed to bend and protect your paint from driveways, speed bumps and curbs.
Reviews
Find Best Price at Amazon"No way, now I have an integra and I bought the garage door bottom rubber and yes it's a bit more work but you're saving 20 dollars, so in my opinion it's worth it!"
"Easy too use and looks good!"
"Easy fix for my front lip till I purchase and paint a new one."
"Rolled out the lip, used a heat gun on the tape and put it on percectly(i also used adhesive promoter from 3m)."
Best Wheel & Tire Mud Flaps & Splash Guards
WeatherTech 110035-120035. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"with all the fake products out there i expected this to be a knock off but was pleasantly surprised that the product received appeared to be a real weathertech product."
"Fit is good and they look great on my silverado 2018."
"They fit right over the existing moldings using the same screws that are there on the truck."
"Great product with easy to read and understand instructions."
"I purchased these for my F-150 a couple of years ago, and they held up well. When I traded the truck in for a Chevy 2500HD, I needed a new set."
"Why the factory does not include these just amazes me."
"I did have to remove a little plastic at the top of the groove on the front passenger side where is fits over a sealant bead on the wheel well of the truck."
"Very easy install."
Best Gas Caps
Fuel Cap. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"This gas cap was the solution to a recurring PO442-PO455 code problem with a Dodge RAM 1500 --. It turns out that the Dodge is VERY sensitive to gas-caps not being installed properly and/or leaking internally."
"Great fuel cap and even better price!"
"Fit my 2006 Dodge Grand Caravan perfectly."
"So far so good."
"I drilled a small hole in the center and reattached the lanyard, but be carful and go slow if you do."
"It fits nice but does not stop the "gascap" warning light on my T&C."
"2006 PT Cruiser with check engine light and the "gascap" code on dash..."
"Bought this to replace the old one for my 2004 Dodge Ram 1500."