Best Powersports Mufflers & Baffles
The Streetfighter style takes the motorcycle back to its basic and essential roots; the Urban Brawler CS One captures this attitude with a minimalist design. Specially fashioned for the monstrous Kawasaki Z1000, the Urban Brawler also allows for optional tip inserts to reduce sound level output 3-5 dB when installed (sold separately).
Reviews
Find Best Price at Amazon"I say almost because there is a bracket on the exhaust for the upper screw that holds the motorcycle's heat shield on and it didn't fit."
"I bought this for my 2015 Z1000 and it fits perfectly !"
"Great looking product."
"Sounds great..gives the bike a good look.."
Excellent Rust and Corrosion Protection Longer Header Life, More Horsepower Lowers Underhood Temperatures Made in the U.S.A.! Low Backpressure to Increase Performance.
Reviews
Find Best Price at Amazon"Welded this in place of my stock muffler on my 2016 Jeep Cherokee Kl 2.4l."
"Legit for what it is, rumble a bit but it's good and stout."
"It works."
"Love it gives my jeep a meaty and mean sound slipped right on 2 clamps and I was done."
"Perfect for what we wanted."
"Great price, very well constructed, be careful with installation, this muffler does not come with any instructions and doesn't say in what direction needs to be installed so do some homework about that."
"Sounds great and powerful!!"
Please Note: The Image Displayed Is Representative of the Item, but May Vary Slightly Depending on Your Specific Model. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"it is easy, cheap, and helps to keep our trails open by not having an obnoxiously loud bike."
"I was hoping that repacking the silencer would quiet the bike down a bit, but my first impression is that it did get a little bit louder."
"Cheap and easy."
"The job of repacking the FMF Shorty Muffler was much easier than I had expected."
"works great."
"It was enough packing to complete one muffler, fit just right."
"Works well with the KTM 250 XCW."
Best Powersports Exhaust Baffles
Quiet baffle for Shortshots Staggered by Vance & Hines. Sold Each .Image is for reference only. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Put in a some "1/2" stainless steel bolts to hold them and voila, they were installed, 10 minutes tops, without having to remove the pipes."
"I have Vance and Hines Short Shot staggered and love the pipes but they didn't even have the stock baffle in them, just too much bite when I get on it. At the regular price these are the perfect part for my pipes but at the deal I got this was a outstanding buy."
"When you hit the throttle it sounds sooo good hghmghghfmmghhhhhhhh :S makes my ears tingle."
"Highly recommend for those that want a lower, deeper exhaust note."
"Works as advertised, takes the sharp crack and rasp off the edge of the exhaust note and quiets the overall sound."
"Old baffles were WAY to loud."
"Most advise drilling your own hole and painting with high heat paint to protect."
"The picture is misleading ordered expecting to get a set."
Best Powersports Silencers & Mufflers
The M4 Standard / Race Series Slip-On Exhaust has a built-in baffle, tuning the exhaust note for a crisp head turning sound. M4 Exhausts are available in both Standard / Race and GP Series mounting configurations.
Reviews
Find Best Price at Amazon"M4 sounds and look Awesome."
"Best sounding exhaust for the FZ-07 in my opinion."
"If you are not sure how to correctly remove the stock system, there are some good videos on YouTube. Cutting the stock pipes was not super easy, even with a wheel cutter and grinder, but have a little patience and don't mess it up. The overlap of the new system to the stock pipes will provide a little leeway if your cut is slight skewed, but take your time."
"Fantastic exhaust!"
"Haven't noticed any power loss, but with the DB Killer out I did have it back fire a couple times when you cut the Throttle, who cares though, it sounds cool and LOUD! For the price and the quality of the product you get from M4, this should be the first mod done to any FZ-07 or any bike for that matter."
"Installs in an hour with the right tools."
"Great exhaust the minute I put it on I knew what a great change it was! Great product and way cheaper than the other exhausts out there."
"Took me and my friend about an hour and a half to 2 hours to get it all on and we definitely aren't mechanics so as long as you know what tools are, it will be a breeze."
Best Powersports Headers & Mid-Pipes
Size: One Size. Includes Dual Bung Oxygen Sensor Ports(18mm &12mm).
Reviews
Find Best Price at Amazon"I paired these pipes with the Vance & Hines twin slash rounds slip-on mufflers, and the Harley Stage 1 air cleaner. The bike sounds great, the pipes were a perfect fit with installation being pretty easy."
"I installed the Dresser Duals along with the Twin Slash slip ons and VO2 naked air cleaner."
"I installed these on my 2014 HD Ultra Limited, (along with V & H 4" Twin Slash Round Slip On's). Then I put a Screamin Eagle air filter on and did a Screamin Eagle Pro Stage 1 Super Tune computer reprogramming. He said the tork of the pipes when revving, made the heat shield below the drivers floor board hit there."
"Absolutely perfect awesome new and very very fast shipping couldn't ask for better all the way around."
"Vance and Hines Quality made it fit perfect the first time."
"My 2016 RG special sounds and performs exactly how I want it to now with V&H twin slash rounds, heavy breather and map."
"Nice low rumble in the idle position and when u get on it sounds awesome."
"Replaced my stock headers with this system she sounds awesome bike breathing a whole lot better awesome rumble with my Rinehart mufflers only thing not crazy about is the heat shields on front pipe a lot of readjusting."
Best Powersports Exhaust Pipes
The original factory design uses standard donut type gaskets which do not really allow any room for normal expansion and contraction.
Reviews
Find Best Price at Amazon"Excellent product."
"Fit perfect."
Best Powersports Exhaust Gaskets
Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"This gasket was used to re-seal my 17.5 horse Briggs intek engine during the camshaft replacement."
"Worked great."
"Just as expected it fit perfectly and shipping was very fast."
"it was a have too, with the rod replacemnet."
"Just what the doctor ordered."
Best Powersports Exhaust Manifolds
DETAILED APPLICATIONS: 2005 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly 2004 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly 2004 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly 2003 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly 2003 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly 2002 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly 2002 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly. NOTE: This Manifold also includes a plug for the reason That some manifolds only use one sensor.
Reviews
Find Best Price at Amazon"Price was great but the heat shield didn’t fit without drilling a new hole and a lot of bending."
"Exactly part and excellent services."
"My car is driving better then ever."
"Manifold has leaks in several places."
Best Powersports Full Exhaust Systems
Vance and Hines Shortshots Staggered Full System Exhaust for Harley Davidson 2014-2018 Sportster models. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Highly recommend this exhaust system for a loud great sound and some extra power."
"I have a 2015 Harley 1200 Sportster 48 with a Screaming Eagle big mouth air intake. The growl of the pipes sounds SO FRIGGEN SICK!! Don't get me wrong these pipes are LOUD but they aren't going to piss your neighbors off."
"I'll start out by cursing Fedex, because mine did arrive slightly damaged, and box open. Here is the link if anyone needs this same type of remedy: https://www.amazon.com/gp/product/B00ZJ6JK60/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 - Just keep in mind, it still won't look completely seamless, but you can't notice that there was damage if you're more than 4 or 5 feet away. It blew me away how loud these are, to point of seeing why some people have to get the quiet baffles, especially if you're an apartment dweller or something, you're signing yourself up to get complaints."
"Ordered Dec.27.2015 at 5pm arrived Dec.29.2015 .Very pleasantly surprized and happy with the quick delivery.This product was installed on my 2015 883 Iron at local Harley Davidson dealership & required no additional parts other than gaskets & a couple of brackets (less than $20 for the parts plus 1.2 hours labor for installiation)Bike is loud now & has than nice Harley roar that you hear from 2 streets away lol.Would definitely recommend this product & seller for future purchases."
"First time I started the bike it was kind of scary hahaha."
"Once installed, the sound is drastically different from your stock pipes."
"Maybe adding better quality photos in color would be worth an extra couple of bucks."
"beyond a night and day difference!!"
Best Powersports Exhaust Heat Shields
This reflective heat shield tape withstands 1100F continuous radiant heat (requires minimum of 1 inch of airspace) and 500F of direct contact. Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent.
Reviews
Find Best Price at Amazon"Although this product does a good job of shielding heat, I gave is 3 stars because the adhesive on this tape is of very poor quality."
"It was a pain to wrap this on the cat on my ford explorer but i can blame that on ford."
"Expensive but we'll made."
"Good tape."
"As a number of people said, it don't stick for long, however trying to stick it on the thing that actually gets hot is a no no."
"Used this on the underside of my ATV plastics to deflect heat away from them and it was a pain to get the backing off. It has been a bit longer now and more and more of this stuff is separating from the backing."
"The adhesive sticks well, but after the first 30 minutes of use, the fiberglass/aluminum backing fell from the tape, causing the tape to be exposed to the heat, melting, and subsequently smoking because of the exposure to the heat."
"If the electrical tape melts then I am back to square one, as this tape will NOT stay in place on its own."
Best Powersports Exhaust Spark Arrestors
New 3D Billet Power Exhaust Tip. Includes 1x billet Power Exhaust Tip with integrated screen arrestor and mounting hardware.
Reviews
Find Best Price at Amazon"I have been using this tip for about 2 weeks and it really improves the sound."
"Arrived on time, installed easily."
"I just wanted a little more thumper sound and this delivers."
"Fits perfectly and looks great."
"looks and sounds great,better than modified stock tip.2013 drz400 s dynojet needle and spring,3x3,142.5 main,25 pilot,stock air filter."
"Nice item but received with dented side."
"Looks better and sounds good."