Best Camera Chest Supports

Chest mount is removable to accommodate smaller dogs.
Reviews
Find Best Price at Amazon"The bottom footage is really shaky, clunky from the dogs legs or what not. The top mount gives a good POV of the dogs head and what they're getting into. I would recommend using superview 1080p by 60fps, just because dogs run fast!"
"this comes with so many attachments and different ways to mount the camera."
"If you have ever owned a underwater camera which gets foggy (this is what happened to me) then it will work great for you. I had my camera sitting in the Hawaiian sun for hours then jumped in to a 65 degree cold fresh water spring. You can use these multiple times you just put them in the oven for 5 minutes at 300 degrees to dry them out."
"We used this floaty on our camera attached to a wrist strap. A couple of times the strap came off our wrist while doing waterspouts, and this floaty saved our camera!"
"Mostly what I like is that it is one sided, so you don't really have to be careful in aligning the thrum screw perfectly to get a good grip, you just place it on and start turning."
"Of course when a dog is walking or running there is going to be a lot of moving parts so perfect crisp footage will most likely never happen but this is the best thing there is in terms of a POV footage for a dog."
"Attaching the Floaty pad: The Floaty has a large adhesive pad to attach it to the back of the GoPro case. The Floaty covers essentially the entire back face of the GoPro case, so aligning it when attaching it to the back can be a bit tricky."
"We watched several videos on how to fit this and adjust it for your dog and read things online and it just wouldn't stay without being too loose or too tight. We used the white fitting to try to hep and tightened the camera as much as possible but eventually the camera would always fall forward or backward as the dogs run around."

CAPTURE WORKS WITH ARCA-TYPE TRIPODS. All-aluminum construction, holds camera during any physical activity while providing instant access for picture-taking.
Reviews
Find Best Price at Amazon"Peak Design includes two small wedges that you have to screw onto either side of the Arca plate for RC2 compatibility, but even after that, the modified plate might not work with your RC2 tripod."
"It said that it'd fit my Manfrotto Arca mounts and it didn't I tried 3 separate mounts and they wouldn't close using the adapter plates."
"I was able to use it on my camera bag to carry another camera and also when i got tired of carrying my heavy bag i was able to strap it to my belt and have access to my camera real quickly."
"Great product, but my opinion, these are not made for large body people with extra weight on the side."
"The CapturePRO allows for easy retrieval from my backpack for quick shots and leaves the camera secure when not in use."
"When it works the system is great and carries your camera well."
"It is essential to have your camera out and ready while hiking if you want photos and this setup lets me carry the camera out most of the time and stow it easily when the trail gets too tough."
"The plate is too loose to offer the stability expected with a tripod, and upon tightening (the black screw), it becomes too tight to quickly remove."

CAPTURE WORKS WITH ARCA-TYPE TRIPODS. Holds camera during any physical activity while providing instant access for picture taking.
Reviews
Find Best Price at Amazon"I find I take my 35mm camera with me more and shooting more pictures because I don't have the camera swinging from my neck. The camera connects and disconnects quickly and because I mount it lens pointing down in most cases I can leave the lens cap off and can unhook and have the camera up to snap a shot in about 1 second."
"You can put it on basically any backpack strap (or belt)."
"I made a lightweight handstrap out of a double loop of paracord, which works great. Protip: add a drop of oil (any old kind, like Remoil) to the threads for the main screws, it'll lessen the friction on the threads when you're cranking down the anodized Al knobs- which, if your PD has gotten scraped on the ground can really save your hands."
"Whether it be on a fairly rugged hiking trail, a small plane in rough weather, etcetera, this puppy will keep your camera SECURE wherever the Capture is attached, and accessible with a single button push, allowing for one-handed securing and releasing of my DSLR (I shoot with a medium-sized Nikon DX-series camera and Nikon 18-200mm lens, to give you an idea of the weight that is being put on the Capture clip)."
"The price is kind of high but it is very well made and you do not want a cheaply made clip holding a 5K camera."
"I have an Osprey Argon 85 pack with very thick should straps so I had to clip to this to the adjustment strap only and it worked very well. Also took a day hike and clipped this to my belt and it worked very well there also."
"Also you can tighten the screw on the other side to hold base securely. I decided to buy this because you can get pro base with other comb."
Best Camera Mounts & Clamps

Quick release base makes moving between shots and locations quick and convenient.
Reviews
Find Best Price at Amazon"The bottom footage is really shaky, clunky from the dogs legs or what not. The top mount gives a good POV of the dogs head and what they're getting into. I would recommend using superview 1080p by 60fps, just because dogs run fast!"
"this comes with so many attachments and different ways to mount the camera."
"If you have ever owned a underwater camera which gets foggy (this is what happened to me) then it will work great for you. I had my camera sitting in the Hawaiian sun for hours then jumped in to a 65 degree cold fresh water spring. You can use these multiple times you just put them in the oven for 5 minutes at 300 degrees to dry them out."
"We used this floaty on our camera attached to a wrist strap. A couple of times the strap came off our wrist while doing waterspouts, and this floaty saved our camera!"
"Mostly what I like is that it is one sided, so you don't really have to be careful in aligning the thrum screw perfectly to get a good grip, you just place it on and start turning."
"Of course when a dog is walking or running there is going to be a lot of moving parts so perfect crisp footage will most likely never happen but this is the best thing there is in terms of a POV footage for a dog."
"Attaching the Floaty pad: The Floaty has a large adhesive pad to attach it to the back of the GoPro case. The Floaty covers essentially the entire back face of the GoPro case, so aligning it when attaching it to the back can be a bit tricky."
"We watched several videos on how to fit this and adjust it for your dog and read things online and it just wouldn't stay without being too loose or too tight. We used the white fitting to try to hep and tightened the camera as much as possible but eventually the camera would always fall forward or backward as the dogs run around."
Best Camera Mounts & Clamps

• Suction Cup • Adjustable Arms • Standard Base • Quick Release Base • Drawstring Bag. Quick release base makes moving between shots and locations quick and convenient.
Reviews
Find Best Price at Amazon"The bottom footage is really shaky, clunky from the dogs legs or what not. The top mount gives a good POV of the dogs head and what they're getting into. I would recommend using superview 1080p by 60fps, just because dogs run fast!"
"I was in the market looking for the hand grip for my GoPro 3+ black when I got an email saying GoPro came out with the handler. Now for the product, this Handler is great!"
"First tried this on the largest dog I have and took her to the dog park, which got a lot of weird looks and good laughs. Using my hero 3 I was able to use my phone to frame up a nice POV, and we captured a lot of good footage, although I did have to make a few adjustments as big dogs do play rough and she knocked the camera a few times while rolling around and playing."
"this comes with so many attachments and different ways to mount the camera."
"If you have ever owned a underwater camera which gets foggy (this is what happened to me) then it will work great for you. I had my camera sitting in the Hawaiian sun for hours then jumped in to a 65 degree cold fresh water spring. You can use these multiple times you just put them in the oven for 5 minutes at 300 degrees to dry them out."
Best Camera Shoulder Supports

【Various Straps】- 360-degree Rotation Wrist Strap with a screw fix your GoPro on the wrist,the angle can be adjusted freely;Flexible Chest Harness is used to equip your action camera comfortably; Vented Helmet Strap helps to attach camera on the forehead, which provides a wider angle and horizon. 【Compatible with】- GoPro Hero 5 4 3+ 3 2 1 Black Silver SJ4000/ SJ5000/ SJ6000, also for SJCAM SJ4000 5000 6000 7000 Xiaomi Yi, Apeman DBPOWER Lightdow WiMiUS Rollei IceFox ODRVM.
Reviews
Find Best Price at Amazon"The Chest Harness Strap Belt and Vertical Surface J-Hook Buckle helps your Motion camera to have a shooting and recording while surfing or in water park. Different pieces of mount available in the kit for different kind of activities like bicycle, auto cycle riding,sking boating, fishing,hiking, camping, swimming. Stick has adjustable ball head and thumb screw locks for multiple angle shooting with 180 degree position. It can mount your device securely on your car while you are driving and can be swiveled into 180 degree as the picture shows providing more angles for viewing and bringing more convenience to the users. Case of this accessories looks cool and perfectly fit in all the stuffs mentioned here and apart from that its is designed to accommodate camera, battery, SD memory card, housing doors and all your leads."
"I feared it wouldn't fit my off brand action camera, and it fits perfectly!"
"(In a good way) The only thing I wish it came with was an explanation for all the pieces."
"If you're going to go on a fun trip, I suggest you prestage some parts/joints together beforehand so that you don't spend a lot of time doing so during your time out."
"Kit has everything you need."
"Some folks might not mind that about the foam, but, I also bought this to protect my items too and I don't feel this foam will do that for me."
"(4pcs Adapter Set). Odly, the selfie stick does have a 1/4" camera mount."
"Used it over the weekend going off some pretty large jumps and the go-pro never shifted and stayed tight for a full day of riding."
Best Camera Cranes

SmallRig Camera Cheese Nato Handle Grip QR Top Handle for EVF Mount or Microphone Shock Mount - 1649
Color: Nato Handle 1649. NATO Clamp, Fast Lock and Release. 1/4" and 3/8" Threaded Holes, 2 ARRIMounting Points. 1 x NATO Clamp Adapter. An integrated shoe mount on the top for attaching on camera lights, microphone shock mounts, etc.
Reviews
Find Best Price at Amazon"First a disclaimer: I don't have shares in SmallRig, nor am I getting kickbacks or anything personally for free from this company to make the comment below. Being a Cameraman in this day and age is not the easiest of jobs, especially with the diverse range of camera's in many form factors, coming onto the market. Not to mention if you're a freelancer like me who in any given month can use any and every form factored camera on the market, the need to adapt your add on's to each of these units can be not only a headache but stupidly expensive. Their products are incredibly well made, well designed with the operator in mind, and the you can use them anywhere and on any camera [a particular frustration for me with some companies who only want you using their products]. Now I realise most of the their products were designed for the DSLR market in mind... I'm also practical, I don't want to pay excessive amounts of my hard earned dollars on a piece of over engineered metal which may only come out once every three weeks, it's just not practical or sustainable in todays ever changing camera design market. SmallRig have priced their equipment realistically for todays market. Time will tell if it's up to task on heavier work loads than the dslr world [which truthfully isn't different at all now-a-days]. And truth be told even if a part did break, it's so competitively priced I could buy three of their items for one of their bigger US competitors and use it in three different configurations on three different camera's if need be...... you get my point. If your looking to kit out your rig and searching for well priced components to use, Give SmallRig a look over."
"I love smallrig and there gear, used this with a nato rail on top of my cage for a top handle, but also put a nato rail alongside this handle so I could mount an evf on that rail and be able to adjust it forward and backworks to help with balance and use of the monitor."
"Just when I thought I had no choice and purchase Wooden Camera, I found this little company called Smallrig that basically makes the same stuff, including the top handle here."
"Can't recommend highly enough, if you are looking for a top handle that slides onto a NATO rail I think this is the best choice in every regard (this is my third top handle)."
"the handle is on the larger side for DSLR bodies, but I like the larger grip for my Digital Bolex D16."
"Got mine and it's perfectly sized to use with the Smallrig small NATO clamp and my NOGA arm to duplicate the Wooden Camera NATO Lock Magic Arm."
"Most of the Smallrig nato rails are barely wide enough and barely usable with non-Smallrig clamps but this one is just too narrow."
"The width is under size for a NATO rail and mating accessories won't grip down on it securely."
Best Camera Cine Dollies

Waterproof legs. made of very special materials makes the tripod perfect for both internal and external use.This means the tripod can be used at any place making it the perfect gadget. Compatibility with camera, any smartphones, Gopro, webcam, etc.Universal Phone clip and 1/4 screw interface - Compatible with all iPhone, Samsung and most Other Smartphones up to 3.5 inches wide.
Reviews
Find Best Price at Amazon"Works great with my go pro. Cons: like with any tripod. The rubber doesnt have lines to know where to fold but you can figure it out."
"Works for my iPhone with a bumper case Great !!"
"Haven’t had a good experience with these mini tripods but this one is great."
"This tripod is made for durability and function made of high impact plastic and metal and for an ex aircraft builder like myself it meets my high standards of quality."
"At beginning, I was kind of worried that the camera would be too heavy so the legs will be moved."
"Love this tripod."
"The tripod is easy to set up, well-designed with high-quality."
"This is by far the best tripod I have found for its unique functionality."
Best Camera Sliders

Motorized Camera Slider Multiple Shooting Methods Options: camera slider can be tracked and 120 degrees wide shot and panoramic shot.
Reviews
Find Best Price at Amazon"it's a matter of remove from both tripods, remove both tripod quick release plates, set on ground, move track/pan pole, put quick release plates back on, put back on the tripod."
"I haven't had a chance to really dig into all of my shots with this, but so far I'm really happy wit the results. You seem to need a balljoint or some other mounting hardware in order to aim the camera. Fortunately, I planned to use this with a ball joint, so it's not a problem for me. The foam included in the case is great to make sure nothing gets jostled, but it's actually TOO tight, to the point where it's hard to get the track, remote, and battery in and out of the case. All of these are very minor points, and are more annoying than deal breakers - at least for me."
"I wish there was a way to contact the manufacturer so they can send me a new controller. They're sending me a new controller which is great customer service."
"If the carriage is loose, there are four set screws on top which pitch two of the rollers in or out from the rail."
"so I can use it with a light weight tripod and move it easily by myself without any disassembly as I am almost always a 1 man band."
"For this price, it's an unbelievable product."
"I need an electric slider, and search the camera slider for some time, I am interested in photography, only through the camera slider to achieve, but I am more fortunate to find this mute motor slider, open carrying bag, It was a very good sturdy aluminum alloy track, and the slider out of the box , I installed the Sony HXR-MC2500 connected to the slider, made a test, I first set the automatic round trip, slide on the track So smooth, so that the video material looks professional, and do not worry about bending, because my camera is heavy enough, I suggest that interviews and shooting people can choose."
"They assured me that each one goes through 3 levels of QA so I wonder if the extreme cold here in the plains had an effect on it while it was out for delivery (I got it from the UPS guy directly when he dropped it off, it did not sit on my stoop for any time at all)."