Best Camera Flash Battery Packs
High-Speed Charging Technology PowerIQ ensures intelligent high-speed charging for all your devices and VoltageBoost prevents cable resistance from slowing your charging speeds. Matte Finish Enhances grip and prevents smudges and fingerprints. • Compatible with the new 12 inch MacBook, 2015 (USB-C cable needed), Apple and Android smartphones, tablets (including the Nexus 7) and other USB-charged devices EXCEPT for the iPod nano, iPod Classic, HP TouchPad, Dell Venue 11 Pro, some Asus tablets, GPS and Bluetooth devices. Light and Compact: A super-high 13000 mAh capacity with two high-speed-charging USB ports is all contained in a portable charger smaller than a wallet.
Reviews
Find Best Price at Amazon"Now with the new Panasonic batteries, I also bought another Anker Mini in the PowerCore series not because of 3350 mAh over 3200 mAh, but rather the Panasonic battery and the faster charging time for the PowerCore version."
"At 8.4oz this is a good weight for backpacking/hiking to keep gear charged."
"I have purchased a few over the last three years and Anker chargers work extremely well. Thanks Anker!"
"Great battery and even better price!"
"Charging on an iPhone SE was reasonably quick and there are clearly 3 or more full charges left as the 4 lights showing remaining charge were still all on afterwards."
"This one starts charging as soon as a device is plugged in."
"Worked very well for keeping up two phones used a lot on a family vacation."
"Amazing quality and it lasts for a long time and truly charges the phone quickly."
13 Hour Charging for 9 Day Use Let RAVPower’s monster-powered 26800mAh battery banks save your day and back your devices with triple USB ports, blazing 26800mAh battery, and up to 9 days of reliable power on a single recharge. Share the Power, Share the Fun Power three devices at the same time through triple powerful iSmart 2.0 USB ports, faster & safer. What’s In the Box: 1 x RAVPower Xtreme Series 26800mAh Power Bank (Model: RP-PB41). 1 x 2 Micro-USB Charging Cables. 1 x Travel Pouch. 1 x User Manual. What You Get: 1 x RAVPower Xtreme Series 26800mAh Portable Charger, 2 x Micro USB Charging Cables, 1 x Carry Pouch, 1 x User Guide & Free 18 Month Warranty.
Reviews
Find Best Price at Amazon"That said, I really didn't have to charge the battery pack very often, which became sort of a running joke between myself and the other cyclists I was riding with - we just couldn't believe how long this device lasted... sometimes weeks at a time)!"
"The capacity is incredible and the charge of the Bank itself stays stable much longer and at the ready than I imagined possible. Original review: I wanted a charger with a higher capacity due to carrying multiple devices that always seem to be draining more quickly than anticipated. I was amazed after charging two devices simultaneously a few days ago that it had only depleted the charger itself just one star."
"As I see in reviews the updated, upgraded model to this one requires you to push button to start charging. Previously I owned another make/model of big charger prior to this one and it too was push to start. Very annoying when trying to charge something while I was away or over a long period of time or something that needed to stay topped off at 100%."
"Rav Power smart charger is speedy, and gets the job done."
"Before this me and my friends had to take six smaller portable chargers on a trip to make sure our devices were charged. What's in the Box: 1 RAVPower 26800mAh Portable Charger. 1 2 Micro-USB Cables. 1 Travel Pouch. 1 User Manual. Pros: Charges all your devices without having to keep recharging."
"I used my charger to plug my GoPro Plus into .to record a recent drive from Minneapolis to Omaha (and back) which was about 14 hours of video. Also would like to retract my criticism of not having a wall plug in since (many people pointed out to me) the description and photos were quite clear what was (and was not) included in the kit."
For Optimal Use: - Use the included cable, your original cable or a third-party certified one (such as MFi). - Compatible with the new 12 inch MacBook, 2015 (USB-C cable needed), Apple and Android smartphones, tablets (including the Nexus 7) and other USB-charged devices except for the iPod nano, iPod Classic, HP TouchPad, Dell Venue 11 Pro, Asus tablets and some GPS and Bluetooth devices. Light and Compact: A super-high 13000 mAh capacity with two high-speed-charging USB ports is all contained in a portable charger smaller than a wallet.
Reviews
Find Best Price at Amazon"Now with the new Panasonic batteries, I also bought another Anker Mini in the PowerCore series not because of 3350 mAh over 3200 mAh, but rather the Panasonic battery and the faster charging time for the PowerCore version."
"At 8.4oz this is a good weight for backpacking/hiking to keep gear charged."
"I have purchased a few over the last three years and Anker chargers work extremely well. Thanks Anker!"
"Great battery and even better price!"
"Charging on an iPhone SE was reasonably quick and there are clearly 3 or more full charges left as the 4 lights showing remaining charge were still all on afterwards."
"This one starts charging as soon as a device is plugged in."
"Worked very well for keeping up two phones used a lot on a family vacation."
"Amazing quality and it lasts for a long time and truly charges the phone quickly."
Best Camera Flash Accessories
Reviews
Find Best Price at Amazon"Not All Batteries Are Created Equal. ***NOTE***. This review contains technical observations which I have reported to Anker. The battery I opened was verified to contain a high quality Panasonic-Sanyo NCR18650BF Lithium Ion cell, which is one of the finest cells available on the market today. - 9.99USD at Time of Review for PowerCore+ Mini in Black. Nay: - Inconsistent Fulfillment, Frequent Product Updates/Changes May Result in Order Errors and Old Product. - Inconsistent Performance of Internal DC Boost Converter Between Batteries, Affects Output Current and Capacity, Actual Available Capacity Varies Between 8.5Wh and 9.5Wh. - Possible Inconsistent Quality Control - Based on my numbers Anker deemed 2 out of 4 batteries to be possibly defective and shipped replacements (not arrived at time of this writing). In order to minimize power loss in the USB cable during whole product testing I custom-built an extra-short USB cable using 22AWG conductors, meaning that all of my numbers will be best-case scenarios for each of the batteries I tested. This was the case for me when I ordered two PowerCore+ Mini's in Black last week, and two Astro Mini's in Black showed up, although they were so close to the PowerCore+ in appearance (in fact, they are identical in appearance) that I didn't even notice the error until a couple of days later when during testing I noticed that the tail cap of the battery had "Astro Mini" written on it. At time of this writing both the Astro Mini and the PowerCore+ Mini are listed as separate products on Anker's website, and share the same capacity ratings, but have some minor published differences. During testing of the Astro Mini's I observed some troubling discrepancies that prompted me to order additional batteries. Anker's packaging has always been efficient, easy-to open, and well-thought, and these batteries were no exception. Each battery came with a short Anker USB Micro cable, a tasteful carrying case, and a short and sweet support pamphlet that tells you how to get questions answered or stuff fixed. Each battery's USB port is also covered with a sticker to remind you that the battery automatically cuts power to the port to conserve energy when not in use, and that a quick tap of the small button in the corner is all you need to get the juice flowing. Well, just do a quick search for "Lithium Ion Fire" on YouTube sometime and you'll see quickly why the FAA restricts how much lithium you can carry on an aircraft in the form of batteries, and why most major couriers won't allow you to ship Lithium batteries via Air Mail unless you have a hazmat contract with them. Serial numbers on devices this cheap are the hallmark of a manufacturer that cares because while you are unlikely to file a police report for a stolen ten dollar battery, Anker certainly wants to know which manufacturing batches are having problems, if any. ***WARNING***. I don't pull punches with batteries or battery vendors, and I didn't intend to judge this battery by its casing alone. Eventually I was able to saw off the rest of the casing without putting a scratch on the battery cell itself, and was able to reveal a Panasonic-Sanyo NCR18650BF cell soldered to a small DC boost converter PCB and USB ports. The NCR18650BF cell is a beauty of a battery cell, and represents one of the highest capacity and quality cells available on the market today. Every battery cell has two capacities. What this means is that "12.06Wh" capacity that you see on the product is only true for a couple of weeks right after Panasonic made the battery cells. By the time those cells are stored, sold to Anker, then stored again, used in manufacturing, stored again, shipped to Amazon, stored again, and then eventually shipped to you, these cells have a usable capacity of around 11.52Wh to 11.70Wh, which is actually what is reflected in the official datasheet for the NCR18650BF. I ran the NCR18650BF cell just by itself against a load of .2C or .67A and a cut-off voltage of 2.50V, the same test that Panasonic uses to get their original rating, and got a capacity of 11.4834Wh, which is just slightly under the "Minimum" rating for the cell, but it's close enough that I can't fault Anker for it. This is the real-world, best-case, available capacity of the cell before it goes through any other losses, such as those introduced by the DC/DC conversion up to 5V, before the voltage drop in your USB cable, and before the conversion losses in your device as it charges the internal battery. The harder you run the battery, the lower the available capacity of the cell is. To determine how hard the USB circuit runs the battery and look for efficiency losses, I removed the battery and connected the circuit to the monitored output on the lab power supply. Using the electronic load I applied a 5V 1A load to the USB port and monitored current draw from the power supply: USB Load Battery Load DC Boost Efficiency. 5.000V @ 1A = 5.00W 1.349A @ 4.2V = 5.67W 88.2%. 4.991V @ 1A = 4.99W 1.637A @ 3.6V = 5.89W 84.7%. 4.988V @ 1A = 4.99W 1.825A @ 3.2V = 6.06W 82.3%. Anker claims 90% efficiency with their DC converters, but since they do not publish their testing process or procedure it is impossible to know under what ideal conditions they performed their tests. Based on conversations with Anker, they are constantly updating and making changes to their designs, which is great, but because these changes aren't publicly tracked and because the batteries are sealed, there is no simple way to know what the characteristics of your battery are. It bears noting that so far all of the tests that we have discussed were performed on a battery that was labeled as "Astro Mini" and it is possible that my battery was manufactured during the early stages of the production shift. That capacity will be lower when drained faster and as you can see above, in order to charge your device at 5V @ 1A, the drain on the battery cell is more than twice that. Since modern lithium cells have a stated nominal voltage of 3.6V, I used the current draw of 1.637A and cut-off voltage of 2.50V to re-assess the capacity of the bare NCR18650BF cell to determine the actual available capacity at the higher drain rate. At the end of the day, what really matters is how the customer will use the battery, so let's get to... [Real-World Capacity and Performance]. These tests were all performed with the batteries fully sealed, assembled, and as they came directly from Amazon. In total, I tested four batteries, two of which were marked as "Astro Mini", and two of which were marked "PowerCore+ Mini", all of which were marked 3350mAh/12.06Wh. They were all designated Units A through D. For the testing procedure, I charged each battery through the USB Micro port per the instructions from Anker until they were full. I then connected each battery to the electronic load and programmed the load for a constant current draw of 1.000A, and measured the output voltage ten times per second until the battery died. Item Received Item Model Available Capacity. Astro Mini (Black) (Unit A) A1105 8.769Wh. Astro Mini (Black) (Unit B) A1105 9.345Wh. PowerCore+ Mini (Silver) (Unit C) A1104 8.607Wh. PowerCore+ Mini (Black) (Unit D) A1104 9.578Wh. The difference in capacity between the best-performing battery and the worst-performing battery was over 11%!!! My notes regarding each unit tested are as follows: Astro Mini (Black) (Unit A): Discharge remained flat and stable until the battery was approximately 75% depleted, at which point the voltage became unstable and dropped significantly. Based on the erratic behavior of the drop I believe the boost circuit began to overheat as it tried to cope with the lower input voltage of the battery cell. Based on conversations with Anker this is likely due to Anker's "Voltage Boost" feature which provides a slightly higher output voltage in order to compensate for the loss in the USB cable. While this does provide a slightly faster charge, it also results in a slightly lower available battery capacity, although this small discrepancy alone does not account for the near 1Wh difference between Units C and D. PowerCore+ Mini (Black) (Unit D): Out of all four batteries, Unit D exhibited the best performance. The output was not only super-flat through the discharge cycle, the available capacity tipped the scales at 9.578Wh @ 1A draw, which was better than any other of the batteries that I tested. I would also like to make clear that charge rate and battery capacity are completely independent of each other. I ordered four of the same battery, and ended up with four batteries that performed completely differently, which brings me to... [Anker's Response]. On 11/23/2015 I forwarded my results to Anker Support along with relevant purchase dates, serial numbers, and other information they requested. It means you're potentially throwing away vast amounts of battery capacity in your external battery pack by using an inadequate cable."
"Friends, We are gathered here today to celebrate the life of our Anker PowerCore+. I noticed my phone was near dead and so I hooked up my trusty Anker and went about my day. #sadface. Anker is survived by his older brother (also a PowerCore+), who was purchased in September and is still going strong."
"Fully charged this will bring my HTC EVO 4G LTE up from grave to full pretty close to twice. It will charge a iempire 5s grave to full twice with a bit left over."
"I was thinking of ideas to protect these from water and debris in my pocket or backpack."
"See my images). - Comes with a nice little bag that can hold the battery as well as a cable. (Note that it comes with a USB > Micro USB cable to charge the battery but you need to use your USB > X cable where X is the type of connector your phone or electronic device uses. The competitor (Jackery® Mini Premium) has 4 lights to show the amount of battery left, but on the other hand it's square so it's harder to carry in your pocket and that's the reason I got the Anker®. See my images for more details:"
Best Camera Flash Brackets
Package includes 1 pack of Camera Flash Speedlite Mount. Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder.
Reviews
Find Best Price at Amazon"This is the perfect connector for this microphone stand (https://smile.amazon.com/gp/product/B01BPBKQ9C/ref=od_aui_detailpages01?ie=UTF8&psc=1) and this shotgun microphone (https://smile.amazon.com/gp/product/B00HE9G3UQ/ref=od_aui_detailpages00?ie=UTF8&psc=1)."
"All the parts are sturdy and well fit."
"Some plastic parts, it may not last forever, but it works for now."
"Works for me!"
"Very nice Mount for Speedlite."
"Does as intended; works well."
"A great tool to have if you use multiple slave flashes."
"High guality, strong sturdy."
Best Camera Flash Adapter Rings
![Auxiwa Clip on Selfie Ring Light [Rechargeable Battery] with 36 LED For Smart Phone Camera Round Shape, White](https://images-na.ssl-images-amazon.com/images/I/51o20drvuyL._SS600_.jpg)
With this Selfie Ring Light, you will be able to take great selfies in dark areas or whenever natural light is not available! Now you have no problem taking pictures at areas without light or at night time. More Information About This Selfie Ring Light: Specifications: LED Quantity: 36 PCS. Weight: 1.5oz/42g. Color: white. Lithium Battery: 250mAH - 3.7V. Max Output: 3W. Charging Voltage: DC 5V. Color render index: ≥95%. Color temperature: 5600k. Look Flawless in Your Selfies: This little light is all about making your selfies best! You will be able to make videos at night or take great selfies in dark areas; you can use it with your rear camera to have high fidelity photos; you can also use it as torch,emergency light, making up light and even more!
Reviews
Find Best Price at Amazon"Great product and works as described."
"Very fun Selfie Ring light for cellphones!"
"I ordered one before, and was taken by my friend, so I buy another one."
"Love it!"
"Battery doesn't last much, other than that it's great."
"Love this."
Best Camera Flash Shoe Mounts
Brand New and Ship from Amazon Warehouse. As an optimized patented product, Godox S-type speedlite bracket is superior: all-in-one, smaller size, portable design, no assembly/disassembly, and easy mounting system. Smaller size, lighter weight, & less occupied space * Unique speedlite mounting way: mounted horizontally or vertically by wrapping speedlite body * Reliable mounting: not require Velcro, no pressure on hotshoe, no metal scratches on speedlites * Mount size is adjustable to fit all brands of speedlites and even Godox AD360 * Bowens mount adds most studio flash accessories, e.g. softbox, reflector, beauty dish, etc. Adjustable Lighting Direction Unique & Reliable Mounting Way.
Reviews
Find Best Price at Amazon"This thing is amazing."
"I also love that i can just slip the softbox right over the bracket."
"One big benefit is being able to have the flash securely mounted and pointed directly into your modifier (opposed to the standard speedlight mounts which offset the flash and form a loose connection). The Bowens mount is great.. The other issue is that the bowens mount reflectors do not line up with the Umbrella hole."
"I think the quarter inch or so that the omni bounce sticks out in front of the flash creates a band of edge light 90 degrees to the face of the omni bounce diffuser that helps to light the perimeter of the Pergear 7 Inch Flash Diffuser."
"I would say my only complaint was in mounting a beauty dish and the knob never seems to have enough tension to keep the thing from rotating since my boom arm is perpendicular to the ground and the dish is at about a 45 to the ground... it wants to swing down."
"My Vivitar 285 flash wont fit ... the flash head is too big so it doesn't fit through the opening...."
"I use these with Quantum Qflashes as I wanted a way to mount them into a modifier without putting strain on the reflector connection, as anyone who knows Qflashes knows is a horribly designed weak point."
"Great quality for the price."
Best Camera Flash Light Diffusers
Bundle includes: - Altura Photo Universal Softbox 13x8" Flash Diffuser and Carry Pouch. - Altura Photo Universal Softbox 9x7" Flash Diffuser and Carry Pouch. - Altura Photo Universal SoftBox 6x5" Flash Diffuser and Carry Pouch. - Premium MagicFiber® Microfiber Lens Cleaning Cloth. Ideal for a variety of situations including indoor events, portraits, macro, food photography and more. - Compatible with most shoe mount flashes including: - e.g. Canon 430EX II 580EX II 600EX-RT. - e.g. Nikon SB-900 SB-910 AF SB-800 AF SB-700. - e.g. Yongnuo YN560 II YN560 III YN560 IV. - Also, compatible with Sunpack, Nissin, Sigma, Sony, Pentax, Olympus, Panasonic flashes. INCLUDES: 3 Altura Photo Softbox Flash Diffusers (6x5", 9x7", 13x8") for Shoe Mount Flash Units + MagicFiber Microfiber Lens Cleaning cloth.
Reviews
Find Best Price at Amazon"I purchased this after a friend purchased one and was so happy."
"I was searching for a light modifier for my Canon 430 EX II speedlite and found this."
"I love having this diffuser specially when taking photos during the night or low light situation as it soften the shadows."
"I was using another "top brand's" diffusers for speedlights, but the directional soft light I get with these Alturas Softboxes is far superior."
"This has been a great little tool and works exactly as expected/advertised...it softens or even eliminates the appearance of shadows particularly when photographing indoors in low light and also worked well outdoors as sun was going down."
"This diffuser does a great job to remove the harshness of the flash from my Neewer TT560 Flash Speedlite for Canon Nikon Panasonic Olympus Pentax and Other DSLR Cameras，Digital Cameras with Standard Hot Shoe."
"Works GREAT!"
"They included a cleaning cloth, which was a nice surprise."
Best Camera Flash Synch & PC Cords
Whether new to remote triggering of camera’s and flashes or a top professional pushing gear to the limits, the Plus lll’s reliability, simplicity and performance make it the perfect tool for the job. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"To my surprise, I discover that the cable would keep the camera "awake" at all times, making it useless for long, unatended sessions due to the heavy battery drain on the Nikon D200/D700. Finally, as my last resort I consulted the wiki.PocketWizzard.com site and after reading all of their latest releases, I found a one-line statement indicating the remote pre-trigger operation would only work in quad mode using channels A, B, C or D. Voila!"
"I am using PocketWizard Plus III Transceivers in a complex radio system. This does not mean that you cannot mix multiple brands of flash equipment and multiple brands of radio triggers, however. By this, I mean it is in fact possible to use a PocketWizard Plus III to trigger another brand of transmitter. This is useful when you need to mix different brands of flashes which have proprietary built-in radio triggers. For instance, I use a PocketWizard Plus III system where the sync output of the PocketWizard Plus III is used to in turn trigger two different flash systems that are mechanically attached to the PocketWizard (not mixing RF, just using a cable)."
"I've used many wireless triggering solutions, they all just stopped working after some time and even when they were working, they weren't that reliable, they miss a lot of shots, they don't work at some locations!"
"I set strobes accordingly: Above bucking chutes looking toward barrels "A", Other strobes on other end of arena point to bucking chutes "B", One strobe facing last Pole on "poles run" "C". At any moment, I can choose which strobes will flash as I need them, that way I'm not ever shooting into a flash with overexposure. However, I feel it's good to keep them a couple feet away, hanging directly on the strobe itself seemed to cause intermittent firing of strobe."