Best Ball Casters

Size: 12 Pack. 2'' diameter rubber wheel.
Reviews
Find Best Price at Amazon"My need was to find small swivel caster wheels for my six art pedestals in our gallery."
"Had to do some work to the cabinet to get a flat surface, but the wheels work perfectly."
"I haven't used them but I'm building some moving backdrops for my studio and I'll be using them to help me move and change props easily."
"These wheels were just what I needed."
"Well made and durable, these allowed me to repair some cabinets I had where the original plastic wheels had broken off."
"Exactly what I wanted."
"Not very durable and not intended for heavy loads."
"They hold a significant amount of weight and still roll on concrete."

Universal 5/16 x 1-1/2 mounting stem with metal mounting socket included (3/8" x 1-5/8" hole in wood required for socket). Model number 8BB50GB0GS04- 4-Pack Caster Classics® 2-inch Antique Gold Ball Caster with Wood Stem & Socket contains four (4) casters four (4) mounting sockets. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Pick up a corner, and the casters fall out and it takes 2 people to reinsert them and put the ottoman back flat on the floor so the weight of the furniture keeps them in place."
"Just what I was hoping for in spiffing up a traditional solid wood chair."
"Nice casters for my kid's art desk I slapped together from scrap plywood."
"As advertised."
"Excellent Product, Great Price, Fast Delivery!"
"Used on the legs of a bench/coffee table in front of couc... perfect- rolls smoothly, easy to install."
"Bought these to go on my accent chair for my desk at home!"
"It would be better if they had breaks!"

Universal 5/16 x 1-1/2 mounting stem with metal mounting socket included (3/8" x 1-5/8" hole in wood required for socket). Model number 7BB50GB0AS01- 4-Pack Caster Classics® Antique Brass Poly Wheel Ball Caster with Wood Stem & Socket 4-Pack contains four (4) casters four (4) mounting sockets. Durable 2-inch Hard Molded Poly Ball Roller Wheel.
Reviews
Find Best Price at Amazon"I had to search and find the correct inserts to have these new casters work properly in my chair."
"Perfect wheels to add to a wooden table."
"Not only can I now roll my once stationary chair, but it raised the chair to a better height for my desk which I didn't even realize I needed until I sat in my rolling chair for the first time."
"(which I frequently do) Very easy to install (about 5 minutes with a drill and a ball peen hammer) and they look very elegant."
"Everything was fine, except the stem was a little thinner than my original ones."
"My old metal casters were literally coming to pieces, and these made for a healthy replacement for my chair."
"Not quite as simple as I thought it would be- but after a little extra work, wood glue and planning they did replace wooden legs on cigar chairs in my office."
"The wheels roll so smoothly, and they look exactly as they are depicted in the photograph."
Best Plate Casters

Simply push down on the foot pedals to elevate your workbench off the floor (3/4-Inch), move to preferred location, then lift up foot pedal to lower table firmly back onto the floor. Easily move heavy workbench to desired location.
Reviews
Find Best Price at Amazon"Since I needed three sets of casters for different power tools, I decided to buy both a Powertec and a Rockler caster set and compare them to find out which one is the best. There are three main steel sections which can be seen in the picture titled "Part Names" with the three labels “Mounting Bracket”, “Pivot Arm”, and “Tilting Plate”. Notice that the Powertec has a much more rounded surface where it contacts the tilting plate, making it easier to slide and decreasing the wear on both this part and the tilting plate. Tilting Plate. Look at the picture with the caption “Tilting Plate Comparison”. Note that the Powertec plate is slightly flared at the top of the picture whereas the Rockler plate is straight. The Rockler also tilts down 1.8 degrees, much less than the Powertec. My guess is that the Rockler’s tilting plate will be more horizontal under load than the Powertec, although this is really conjecture on my part. Mounting Bracket. One minor issue is that the Rockler mounting plate has two sides and a center section that should be bent 90 degrees from each other. Material Thickness. The pivot arm, tilting plate, and mounting bracket on the Powertec are fabricated from steel that is 1/8” thick, or .125”. Finally, when mounting casters on my really heavy table saw, I will relocate the mounting hole on the tilting plate closer to the pivot point (where the 1/4" bolt is located) to put less stress on the plate when raising and lowering."
"I built an 8' long workbench and wanted to be able to move it on occasion or at will for various reasons (working on large objects, working on the wall behind the bench, cleaning...) so at first I was just looking for regular wheels - then I found these."
"These leg levelers allowed me to adjust the table height precisely to match the table saw's height and to assure the outfeed table was in plane with the top of the saw."
"They shipped rattling around in a big box as others have mentioned, which was somewhat disconcerting, but they were not hurt."
"I can move the table full of tools with a single finger and often have to grab the table to stop it because it will roll on it's own once in motion."
"These casters have no problem lifting the bench and it moves very smoothly across the concrete floor."
"Did follow someone else's recommendation to install slightly (0.5-1 inch) - higher placement of unit resulting in lesser clearance."
"I would highly recommend them if your project needs mobility though keeping in mind as stated that each wheel is rated for one hundred pounds."
Best Stem Casters

Includes sleeves.Technical Details:1-1/4" diameter swiveling hardwood caster wheels.Stem measures 1-1/2" long.Inside diameter of sleeve is 5/16".Wooden caster wheels are 5/8" thick.Zinc-plated steel sleeves.
Reviews
Find Best Price at Amazon"I ordered these, and when I took off the adhesive circles from the bottom of the table legs, I was surprised to find holes already in the table legs."
"These were perfect for restoring an 80 year old dresser we had inherited."
"Replaced from an old chopping block that they were removed before it came to me."
"High quality casters work very well on antique table my friend loves his table now that is the correct height he did not know it was missing casters."
"I was concerned that these casters wouldn't hae the vintage look I needed."
"Perfect for the little antique dresser I was refurbishing."
"worked perfectly on kitchen table."