Best Beam Trolleys
With an ample 4400-pound capacity, this hoist comes standard with a selection of spacer washers for quick adjustments to fit beam flange widths. With an ample 4400-pound capacity, this hoist comes standard with a selection of spacer washers for quick adjustments to fit beam flange widths. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I have not loaded it with anything extremely heavy as of yet, but the light pieces have been easy to maneuver and place where I wanted without any jerking, yelling, tugging, or nervousness from it not being controlled."
"My first one went on a jib crane I built with a 10" beam and this one was placed on a solid 4" beam running down the middle of the barn."
"I have a couple trolleys."
"Just what I was looking for."
"I ordered a pair of these trolleys and found that when it came time to mount them, there is a wide range of adjustment for beam width."
"I had a Grainger in my old shop that worked fine and although I found several out there the price had gone up quite a bit."
1-ton capacity Multiple spacer washers make bame flange wide adjustment quick and easy Hardened wheels with lubricated for life, double sealed ball bearings For use with wide-flange H-beams, standard I beams or curved track Proof tested with test certificate. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I have not loaded it with anything extremely heavy as of yet, but the light pieces have been easy to maneuver and place where I wanted without any jerking, yelling, tugging, or nervousness from it not being controlled."
"My first one went on a jib crane I built with a 10" beam and this one was placed on a solid 4" beam running down the middle of the barn."
"I have a couple trolleys."
"Just what I was looking for."
"I ordered a pair of these trolleys and found that when it came time to mount them, there is a wide range of adjustment for beam width."
"I had a Grainger in my old shop that worked fine and although I found several out there the price had gone up quite a bit."
The pickling of the steel produces a smooth surface free from scale. TROLLEY ASSEMBLY - 4 wheel Unistrut trolley assembly.
Reviews
Find Best Price at Amazon"I used this with some unistrut to make a mount for my heavy bag."
"This trolley is a piece of 1/4 in."
"Trolley works great with the strut I installed in my garage."
"these are wonderful solid build and bolt up simplicity."
"A wonderful product at a good price."
"just took awhile to get here."
"This is a great product."
Best Beam Trolleys
1-ton capacity Multiple spacer washers make bame flange wide adjustment quick and easy Hardened wheels with lubricated for life, double sealed ball bearings For use with wide-flange H-beams, standard I beams or curved track Proof tested with test certificate. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I have not loaded it with anything extremely heavy as of yet, but the light pieces have been easy to maneuver and place where I wanted without any jerking, yelling, tugging, or nervousness from it not being controlled."
"My first one went on a jib crane I built with a 10" beam and this one was placed on a solid 4" beam running down the middle of the barn."
"I have a couple trolleys."
"Just what I was looking for."
"I ordered a pair of these trolleys and found that when it came time to mount them, there is a wide range of adjustment for beam width."
"I had a Grainger in my old shop that worked fine and although I found several out there the price had gone up quite a bit."
Best Power Hoists
Maximum Lifting Capacity: 440 Lbs., Maximum Lifting Speed: 33 Feet Per Minute, Maximum Lifting Height: 38 Feet Single Cable Lifting Capacity: 220 Lbs., Single Cable Lifting Speed: 33 Feet Per Minute, Single Cable Lifting Height: 38 Feet Double Cable Lifting Capacity: 440 Lbs., Double Cable Lifting Speed: 16.5 Feet Per Minute, Double Cable Lifting Height: 19 Feet. Braided high carbon steel cable 1/8 inch thick.
Reviews
Find Best Price at Amazon"It is used to lift a 200 lb fifth wheel hitch from the bed of my truck when I need to use the truck for other than towing a fifth wheel."
"Shipping was very fast, hoist works very good, saves my back from lifting heavy things, I lift the front of my lawn tractor and change or sharpen blades with out lying on the floor, I adapted the hoist to a barn door rail and rollers, now I can lift and roll anything outside and load it with ease."
"had a job where I was building a deck atop a 3 story building in Nob Hill area of SF, it was a tight squeeze to hand lift materials up to the roof using man power as the only way up was a windy stair which any body knows can be disastrous at best."
"Use it to lift items up to deck so as avoid carrying things from the car UP the steps into the house."
"I put this in my attic so I would no longer have to carry heavy items precariously up a ladder."
"I purchased this lift to put in the attic of my new garage."
"Not only did it make folding and lifting the trailer effortless, I actually unintentionally lifted the entire trailer on first use!"
"i can lift the front end of the tractor and clean the deck in no time and don't even have to take toe deck off to clean!"
Best Manual Hoists
The Torin Big Red 1-Ton Chain Block provides an economical hand hoist capable of hoisting heavy-duty workloads. The hardened load sheave with four precision machined chain pockets use roller bearings for smooth operation and low wear.
Reviews
Find Best Price at Amazon"Nice chain hoist for the money, I could have used a lighter hoist but for the difference in cost decided on the 5 ton."
"I work as described."
"Works very good when I rais my 69 inch cut Hustler zero turn lawn tractor."
"Perfect for lifting my zero turn mower."
"Had to wipe grease off chains it is shipped with."
"Used it to pull a 50gal water heater into and out of the attic."
"It's worked good every time I've used it, I've had it about a year and I use it for everything from pulling motors to holding up the front of my lawnmower... it is almost too light for pulling V8 engines, by too light I mean it gets the job done for sure, but you have to put some muscle into operating it, but it's expected for its size, if you plan on using it for pulling a lot of V8 engines or anything over 700 lbs regularly then get a 2-ton or better, but 6 and 4 cyl engines It works great!"
"It was well worth the money and so much less expensive than anything I could find locally."
Best Hoist Accessories
Wukong Round Neodymium Magnet with Diameter of 3.54 inch and Thickness of 0.70 this fishing magnet is made with A3 steel plate and coated with Nickel-Copper-Nickel to be the strongest type of permanent magnet available Multi Purposed with COUNTERSUNK HOLE and Extremely strong Neodymium Magnet is idea salvaged of various iron-containning nickel material in river, flishing, hanging, or anything need strong magnetic you can make good use of it. Extremely powerful magnetic force This fishing magnet is made up of a super strong neodymium magnet inside of a chrome plated steel cup that concentrates the magnetic force to give this an almost unrivalled 500 lbs of holding power.Absolutely meet your requirements for magnetic force. High Quality: The powerful magnetic force is only concentrated at the bottom, The other three sides are Protected by steel cups that almost no magnetic force and magnetic force equivalent to 10 times the volume of the same magnet. Super Powerful Magnetic: Wukong Magnet Diameter 3.54INCH(90mm) Round Neodymium Magnet has strong magnetic--500 LBS(226KG) for a Direct Touch and Direct Pull Under ideal conditions.
Reviews
Find Best Price at Amazon"Nice magnet."
"Would recommend a small metal funnel placed over ring attachment and having the rope pass through it, large enough to enclose the magnet (but short) to reduce possibility of catching on rocks or branches."
"I gave this magnet 5 starts because it does what it is intended to do, and is great for magnet fishing."
"Super strong."
"She hurt her finger (not expecting the strength) and did some decent damage to the toolbox.... it also took me a good amount of time to get it off."
"I bought this for my son, and he has a new hobby."
"This is the benchmark supermagnet for magnet fishing adventures and excursions."
"Very powerfull!!"