Best Corner Rounding End Mills
Intended for use in milling rounded corners Form-relieved type; can be sharpened repeatedly without changing the form. Suitable for a wide range of ferrous and nonferrous materials. Set include 1 of following size: 1011-0116 (Radius 1/16", Shank Dia. 7/16", Overall Length 2-1/2"), 1011-0332 (Radius 3/32", Shank Dia.
Reviews
Find Best Price at Amazon"I haven't used all of them yet but the ones I have used work very well."
"Work well in hobby shop on aluminum."
"They are just right for my needs...."
"Excellent quality, great price, Fast delivery!"
"Fast shipping and a good product."
Designed with 4 flutes, straight shank, deep helical groove. Package Content: 1 x Straight Shank End Mill Cutter, 1 x Case; Product Name: End Mill Cutter.
Reviews
Find Best Price at Amazon"I've used this tool with excellent results engraving and cutting acrylic and PVC."
"Not bad!"
"not as sharp as i had hoped but not bad for the money."
"Great bit at an excellent price."
"Cuts well for an inexpensive end mill."
"I bought this for my Bosch 6 speed router, and OMG... it's absolutely amazing!"
3 Accusize - Metric 20 Pcs HSS TiN Coated End Mills Set 3 to 20mm, 2+4 Flute, Fully Ground, #1810-0104
Metric 20 Pcs HSS TiN Coated End Mills Set, 2+4 Flute, Fully Ground, #1810-0104.
Reviews
Find Best Price at Amazon"End mills are good quality but the box has plastic inserts (not wood as shown) Plastic holders were broken when it arrived."
"End mills are ok but came with plastic index not wooden as pictured and index was smashed and unusable."
Best Corner Rounding End Mills
Intended for use in milling rounded corners Form-relieved type; can be sharpened repeatedly without changing the form. Suitable for a wide range of ferrous and nonferrous materials. Set include 1 of following size: 1011-0116 (Radius 1/16", Shank Dia. 7/16", Overall Length 2-1/2"), 1011-0332 (Radius 3/32", Shank Dia.
Reviews
Find Best Price at Amazon"I haven't used all of them yet but the ones I have used work very well."
"Work well in hobby shop on aluminum."
"They are just right for my needs...."
"Excellent quality, great price, Fast delivery!"
"Fast shipping and a good product."
Best Radiused-Corner End Mills
Specification: Material: solid carbide(Tungsten steel). Shank diameter: 3.175mm /0.125 inch. Cutting edge diameter: 0.6-1.5mm. Total length: approx. 10pcs New 0.6-1.5mm PCB Print Circuit Board endmills: 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 mm.
Reviews
Find Best Price at Amazon"I just picked my roto tool up off it's hanger and half of it was gone."
"I milled 2oz copper clad PCB board with no issues, I was also able to drill the through holes with them."
"thanks, just what i needed."
"All but two of the bits for broken."
Best Chamfer End Mills
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Router Bits are made with Premium Carbide.
Reviews
Find Best Price at Amazon"I chamfered many edges of hickory, walnut, maple and sassafras with this bit, and it was impressive."
"Nice sharp bit."
"Great little bit for my trim router."
"For me Whiteside is the go to router bit company."
Best Tapered End Mills
-Coating: TiAIN. -Material: imported tungsten carbide. -Suitable For:Cutting, end milling, slotting on: aluminum, solid wood,partical board,Hard wood, plywood, etc; -Use top quality imported tungsten steel carbide -Excellent chip removal effect!
Reviews
Find Best Price at Amazon"This bit worked so flawlessly and precise."
"This cutter is a really good quality tool."
"This particular size seems best for what I normally do 12" x 8" carvings."
"My go to bit for 3d and edge lit acrylics, well worth the money."
"Cuts quickly and well with clean lines, even in soft wood."
"Excellent price, got 3 delivered for the price of one elsewhere."
Best Square Nose End Mills
The 3/16" through 7/16" end mills have a 3/8" shank.
Reviews
Find Best Price at Amazon"I used some of these bits for milling out a lower receiver they worked excellent For cutting into the aluminum no problems very easy to use."
"I did not give it the full five stars because the depth of flutes is shorter than most mills by as much as 1/2 inch on the 3/4 inch mill."
"I have had excellent results with my LMS 3990 High torque mini mill. After facing 30 square inches, four or five passes, my four flute 3/4 bit wore out and started throwing sparks."
"Complete set but end mills wear quickly."
"Two of the mills has surface rust."
"These End Mills are sufficiently hard and sharp for general use."
"Bought them as prime for free shipping, the LMS ones you have to pay shipping for!"
Best Ball Nose End Mills
Package includes: 6 pieces End Mill Cutter CNC Bits. 1.Cutter Radius:0.5; Shank diameter:4mm ;Overall Length:50mm; 2.Cutter Radius:0.75;Shank diameter:4mm ;Overall Length:50mm; 3.Cutter Radius:1.0; Shank diameter:4mm ;Overall Length:50mm; 4.Cutter Radius:1.5; Shank diameter:4mm ;Overall Length:50mm; 5.Cutter Radius:2.0; Shank diameter:4mm ;Overall Length:50mm; 6.Cutter Radius:3.0; Shank diameter:6mm ;Overall Length:50mm; 4.For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
Reviews
Find Best Price at Amazon"They make extremely smooth cuts even at very high feedrates."
"Fast delivery, accurate description."
"as advertised ,promptly delivered."
"I broke one of the smaller bits when milling delron."
"have not used yet, I thought they were 1/4" shank."
"Looking forward to using them on MY CNC."
Best Drill Mills
These Engraving bits have sufficient flexural strength and wear resistance. Milling, hole and plate edge, surface clean, tidy, no burr. Made from ultra-fine grain carbide material which of good milling properties to ensure. efficient work. A Wide Range of Materials can be engraved, including: Circuit boards,Metal,Majority of. plastics, Wood,SMT,Fibre glass, Carbon,FR-4, CEM-3 board and environmental board. Milling, hole and plate edge, surface clean, tidy, no burr.
Reviews
Find Best Price at Amazon"They do the job, though they dull quickly when milling CF, hence the 3 stars."
"Perfect for PCBs and milling down plastics.."
"Not the bits fault at all, but some recommendations of feed and plunge rates per material would have been very helpful."
"Good price fast delivery."
"I ordered this product not for its intended use on pcb's."