Best Pressure Probes & Sensors

The angled tips shown have 4" insertion depth. A-305 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical.

The dual scaled adjustment knob in inches water column and Pascals allows changes to the switching pressure to be made without a pressure gage. WC): 0.08 to 1.2 Sample Line Connector: Barb Connection for 1/4" ID Country of Origin (subject to change): Germany.

The Model 2EM Differential Cylinder Pressure Tester combines the features of our popular 2E tester and a Master Orifice into one tool. Note: For use with engines of 5" Bore Diameter or smaller per AC43.13 REV 1B.

Cut down on wasteful spending with the help of the Thermal Leak Detector from Black and Decker .The TLD100 is an infrared sensor that finds these leaks along walls, molding, ductwork and more. The Black & Decker thermal leak detector helps you increase the efficiency of your home's insulation by finding leaky areas that can lead to higher heating and cooling bills. Easy-to-Read Color Coding and Screen The thermal leak detector makes it easy to monitor your home's energy efficiency by finding areas that let heat out and cold air in. Cut Energy Bills and Improve Your Home's Efficiency Sealing the leaks and improving insulation in your home can help you save as much as 20 percent on your heating and cooling bills. Sold with a 5-step guide to fixing basic energy leaks and comes with the thermal leak detector.

Energy Efficiency: The motion sensor light switch automatically turns ON/OFF based on room occupancy, avoiding the waste of energy from leaving the lights/motors on when nobody is in the room, including bathroom, closet, hallway, and office. Operating modes: • Occupancy Mode: Light switch sensor will automatically turn on the lights when you enter a room and automatically turn off after the room is vacant, making it especially convenient when entering a room with your hands full. • Vacancy Mode: Requires manually turning the light on and automatically turns the light off when the room is vacant. NEUTRAL WIRE REQUIRED, 1,200 square feet coverage, 180 Degree View; 120VAC, 500W Incandescent, Halogen, Fluorescent, LED, CFL, Works with all bulb types.

Specification: • DC Voltage Range and Accuracy: 6V/60V/600V ±(0.5%+3). • AC Voltage Range and Accuracy: 6V/60V/600V ±(0.8%+5). • AC Current Range and Accuracy: 6A/60A/600A ±(2.5%+8), 400A-600A ±(3.0%+10). • Resistance Range and Accuracy: 6K/60K/600K/6M/60M ±(0.8%+3). • Capacitance Range and Accuracy: 600uf/6000uf ±(4.0%+3). • Temperature Range and Accuracy: -20~1000℃（-4~1832℉) ±(1.0%+2). • Max Display Value: 5999 digits. • Sampling Rate: approximately 3 times per second. • Automatic Shut-down Time: 10 minutes. ▲CONTINUITY TEST & OVER LOAD PROTECTION - Use the PTC protection circuit for Resistance, continuity sensor confirms that the circuit conducts electricity, and frequency measurement. ▲TRMS 6000 COUNTS MEASURING - Auto Ranging accurate measures AC current to 600 A, AC and DC voltage to 600V, and resistance to 6000Ω, Temperature, Continuity and Capacitance.

The Westek Swivel Mount Light Control offers a measure of safety, security and convenience by automatically turning your light on at dusk and off at dawn. Operates incandescent, fluorescent, LED, metal halide, mercury vapor and sodium fixtures.

The device is a low cost, compact and easy to use encoder based cable-extension transducer. Linear guide system, the direct determination of the guide element, such as: the length limit, gantry cranes, level measurement. Hydraulic system, with the piston-oriented systems or hydraulic cylinder, the displacement sensor deflection of these devices to collect data. Scalable systems, such as presses, lifts, bending machine, bending machine. Chains, cranes and cable winch to adjust, such as forklifts, stage equipment, lifts and cranes device. Calibration function: Set 9 calibration points, in order to achieve linear differential fill feature. Ratio can be set, determines the ratio between input signal and displayed value.

It is ideal for corridors, workshops, basements, indoor garages, stairwells, doorways, closets, and other dark places in your home and shed. Specifications: - Sensitivity: 3 meter Distance. - Sensor Range: 100 degrees. - Light color: Pure White. - LED life: 50,000 hours or more. - Size: 5.9" x 4.3" (L x W). - Material: Aluminum + ABS. - Light weight: 205g/7.0oz. EASY INSTALLATION: The led wall light can be mounted to any wall, simple installation, you can install it with the adhesive tape or mounting screws,no wire required.

Features: Two selectable differential input channels. On-chip active low noise PGA with selectable gain of 3264 and 128. On-chip power supply regulator for load-cell and ADC analog power supply. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Simple digital control and serial interface: pin-driven controlsno programming needed. Selectable 10SPS or 80SPS output data rate. Simultaneous 50 and 60Hz supply rejection. Current consumption including on-chip analog power supply regulator: normal operation < 1.5mApower down < 1uA. Operation supply voltage range: 2.6 ~ 5.5V. Operating Temperature Range:-20 degree ~ +85 degree. HX711 Weighing Sensors AD Module for Arduino Microcontroller.

Mini Pan and Tilt Kit with 2 Servos The kit includes brackets, two miniature servos and all the nuts, bolts etc.

Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay or contactor are not included here. Max Switching Voltage : 220V DC/AC;Max Switching Current : 1.5A;Max Breakdown Voltage : 300V DC/AC;Max Carry Current : 3A.

5x SW-520D Roller Ball Tilt Switch The Brass Case is sealed in Shrink Tubing to Avoid Short Circuits.

Good Quality Chips Directly From Factory.

Specific parameters: Receive Range (NM) 400-1000. Current (MA) 15-20. Pin length: 25mm. Diameter: 5mm. Weight : 7g. Enter your model number to make sure this fits.

CEILING OCCUPANCY SENSOR uses passive infrared technology, PIR motion sensor to automatically turn ON/OFF lights. This motion sensor features a bright LED indicator when the sensor senses motion.

Set includes one sensor/one receiver. Sensor can detect motion up to 40 ft away. Tested through thick forestry, hail storms, gusty winds, heavy rains, scorching heat, and snow. REALISTIC RANGE- 1/4 mile long range has been tested in real world settings with trees, buildings, walls, and vehicles in order to make true and realistic wireless range claims (please note: extra heavy interference such as thick walls, metal siding, tall hills, and many trees will diminish the wireless range). We offer friendly and knowledgeable USA based tech support that will help you both before and after your purchase.