Best Archery Cocking Devices

Crank Cocking device for Barnett Crossbows with Power Stroke of 16 inches and Up This Crank Cocking Device is compatible with: Barnett Vengeance – 78205 and 78201 Barnett Vengeance 2 - 78061 and 78057 Barnett Ghost 415 Revenant – 78059 and 78044 Barnett Razr & Razr Ice – 78210 and 78212 Barnett Ghost 410 – 78222 and 78220 Barnett Raptor Reverse – 78246. For use with the Quad Series, Wildcat Series, Panzer V, Ghost Series, Buck Commander, Penetrator, Vengeance, Recruit Series, Razr, Brotherhood, Raptor Series and BCX.
Reviews
Find Best Price at Amazon"I installed it on a Vengance Xbow in a couple hours watching a movie."
"The only issue was the side plate where the locking switch goes needed to be removed so it could be slid in. Considering this cocking device wasn't sold specifically for the brotherhood it was a minor issue."
"Works nice, directions should state that some of the rope needs to be removed to prevent binding depending on the crossbow."
"I mounted mine behind the scope.This product helps alot in cranking , easy on my back.Highly recomend this product."
"If the cranking strings are equal, then it should pull it even, but I think it could have a smaller width guide so it can't slide around, that would help. Since its installed below the flight path of the rail it really starts to pull hard on the string and hoping you get the 2 clicks."
"Does not fit well on Barnett ghost 360."
"I have a bad shoulder and elbow and thought this might make it easier to cock my crossbow, it worked great but ended up failing."
"There is a rubber holster that is "glued" onto the scope base, which I'm sure will come off and get lost. As I said, it might be my expectations, but I would get the red hot rope cocker with the rollers and skip the cranking device."

This item made by Excalibur crossbow is the perfect rope cocking device to meet the demand for high quality crossbow products. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I had to switch to an Excalibur Eclipse crossbow a couple of years ago due to a shoulder injury, and using the rope aid has been troublesome."
"I have been hunting turkeys on the ground but I think the crank will make cocking the bow in my deer stand quick and effortless."
"Pricey but solid."
"Just had my 2nd shoulder surgery, so there was no possible way to cock my bow unless someone did if for me..."
"If you're hunting and need to cock the crossbow with this, be prepared for a clicking noise that will scare the game out of the area."
"If you have problems with this , the problem is not the cocking aid it is operated error not the product ."
"With an Excalibur Equinox with a draw weight of over 200 pounds it gets tiring during practice to repeatedly use a cocking rope."
"I have the "Equinox" and suffered an accident at work breaking my back and neck and could no longer cock this this thing using the std rope cocker."

The Nub crossbow arrow release tip is small and ultra portable and enables you to safely release a cocked bow in the field. Inserts into standard crossbow bolts to create a safe and effective way to de-cock a crossbow.
Reviews
Find Best Price at Amazon"Love it!"
"I used it every time I went out this season."
"would not work on alum."
"Never used, but fits as described."
"works, fits in quiver nothing extra to carry."
"I no longer have to bring a de-cocking bolt out with me."
Best Archery Releases & Aids

Crank Cocking device for Barnett Crossbows with Power Stroke of 16 inches and Up This Crank Cocking Device is compatible with: Barnett Vengeance – 78205 and 78201 Barnett Vengeance 2 - 78061 and 78057 Barnett Ghost 415 Revenant – 78059 and 78044 Barnett Razr & Razr Ice – 78210 and 78212 Barnett Ghost 410 – 78222 and 78220 Barnett Raptor Reverse – 78246. For use with the Quad Series, Wildcat Series, Panzer V, Ghost Series, Buck Commander, Penetrator, Vengeance, Recruit Series, Razr, Brotherhood, Raptor Series and BCX.
Reviews
Find Best Price at Amazon"I installed it on a Vengance Xbow in a couple hours watching a movie."
"The only issue was the side plate where the locking switch goes needed to be removed so it could be slid in. Considering this cocking device wasn't sold specifically for the brotherhood it was a minor issue."
"Works nice, directions should state that some of the rope needs to be removed to prevent binding depending on the crossbow."
"I mounted mine behind the scope.This product helps alot in cranking , easy on my back.Highly recomend this product."
"If the cranking strings are equal, then it should pull it even, but I think it could have a smaller width guide so it can't slide around, that would help. Since its installed below the flight path of the rail it really starts to pull hard on the string and hoping you get the 2 clicks."
"Does not fit well on Barnett ghost 360."
"I have a bad shoulder and elbow and thought this might make it easier to cock my crossbow, it worked great but ended up failing."
"There is a rubber holster that is "glued" onto the scope base, which I'm sure will come off and get lost. As I said, it might be my expectations, but I would get the red hot rope cocker with the rollers and skip the cranking device."
Best Archery Release Aids

Tru Fire Hardcore Buckle Foldback. Fits both left and right hands, 100% made in USA.
Reviews
Find Best Price at Amazon"Someone else who reviewed this release mentioned a click when drawing their bow, but mine doesn't make any noise. I don't know why so many bow hunting bow and accessory manufacturers do this kind of thing."
"Where the release slides on the ring."
"Pound for pound the best release you can buy."
"Thia is probably the best release that Tru-Fire has ever made."
"Wasn't sure about the actual firing mechanism.... just took a couple of minutes to get used to."
"As a guy with average sized hands (7" from base of wrist to trigger finger tip) and probably a smaller than average wrist, with the base completely screwed down it is still a little too long of a reach to the trigger."
"Best archery release I have ever used."
"If you get this release I would recommend getting a d- loop if you don't already have one because the string on your bow is going to be a little too thick for the hook to get a good grip."