Koncocoo

Best Boat Painting Supplies

Poli Glow Kit Complete
This Complete Poli Glow Kit includes everything necessary to successfully apply Poli Glow for the first time! Poli Glow will work on the following: RV's, Boats, Canoes, Motorhomes, Painted Fiberglass, Painted Metals, Rubber and Vinyl Lettering.
Reviews
"Instructions stated that applying the Poli Glow was the "easy" part, and, despite the time it took to apply 6 coats, it was. Advised to reseal with a couple more coats every 6-12 months, which we plan on doing at the beginning of every summer season."
"I purchased this product to fix the problem I have had with my end cap (front) of my 31 SAB Cougar 5th Wheel."
"So the oxidation on my decal was so bad that I actually sanded it down with 1000 grit wet and dry sandpaper until the colors were consistent. I also noticed that bug removal after a long trip was MUCH easier on the PoliGlow surface than the plan factory finish."
"I had avoided purchase for several years because of comments by some critical consumers that considered it a glorified floor wax that was difficult to clean off."
"I appreciate all of the reviews, that and an article in motor home magazine helped me decide to try Poli glow, the prep work is very important and hard, I used bar keepers friend on heavily oxidized areas then Poli prep, but remember you are sealing the surface, I did 3 small areas about 5x5 with the Poli glow, the first couple of coats don't look the best but when you get the fifth or sixth coat on it looks amazing, I have been trying to get the shine like this for the last four summer's trying many different products!"
"Stop buffing and compounding its just not worth the trouble after you learn to use this product, yearly mainaince is very easy and your toy will look great as well."
"After five years and hundreds of dollars trying to restore the finish, we discovered this."
"BUT it looks GREAT!"
Find Best Price at Amazon
West System 205B Fast Hardener .86 QT
FAST HARDENER produces rapid cure. Enter your model number to make sure this fits.
Reviews
"As always, couldn't do it without the addition of this elixir to my mixing pot."
"This WEST product worked as always."
"We bought the 105 epoxy resin and 205 hardener and pumps for a slab table."
"This seller also packages the containers correctly (i.e. UPS pronounced OOPS couldn't damage them during shipping."
Find Best Price at Amazon
TotalBoat 5:1 Epoxy Kits
The 5:1 epoxy resin and hardener pumps are designed to reduce waste in addition to ensuring you get the exact ratio and a perfect cure every time. Choose TotalBoat 5:1 Fast Hardener to achieve a proper cure while working in cooler temperatures (50-85°F). TotalBoat 5:1 marine epoxy resin can be applied to fiberglass, reinforcement fabrics, wood, etched aluminum, and bare steel. To make a strong adhesive, filleting material, or fairing compound, combine the resin with TotalBoat fillers and thickening agents. These convenient, 5:1 Epoxy Kits can save you time and money on projects ranging from wet layups and laminating, to installing bulkheads. Includes metered resin and hardener pumps that provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time.
Reviews
"Getting the two part epoxy with pumps made it easy to mix the proper amount of epoxy (12.3 fl oz) using the slow hardner to level the area under a toilet."
"They foolishly built the house with the exterior windowsill sitting right on the brick of the window, so the wood over the years pulled up moisture from the brick and held it as it ran down the windows. So I did some research, found out about marine resins for water rot, got this. I scraped out all the rot, which left me with the shell and good size openings on top of the sill."
"Easy to spread and absorbed well by fiberglass sheets because it isn't a thick resin(you can thicken it if needed)."
"I finally have got down to it to use this product ."
"Pumps work well, the epoxy is very easy to prepare, and the cups allow you to let the epoxy remnants cure completly and then just squeeze the cup and the epoxy flakes away from the cup, with no damage to the cup."
"I applied the product on the delamination area, and clamped it for about 10 hours."
"Excellent epoxy, with a comfortable open, working time."
"My husband is building a boat from scratch and after using other epoxy products, the TotalBoat Kit was hands down the best."
Find Best Price at Amazon

Best Boat Cleaning Tools

West System 105 Epoxy Resin (.98Gallon 10.3-Pounds)
EPOXY RESIN is clear, light amber, low viscosity liquid. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.
Reviews
"works as describes, but I cannot get the bubbles out of the epoxy."
"The product pairs perfectly with Hardener."
"Best price, best product, delivered to my door, how could I ask for more?"
"Works well I follow some holes in a table I was working on."
"Used in combination with West System 206 on an outdoor bench; easy to mix and apply (I would recommend getting both West's pump kit, and using their roller covers as well)."
"It works every time."
Find Best Price at Amazon

Best Boat Tools

Snap Setter Heavy-Duty Snap Tool for Fastening, Replacing Snaps, Repairing Boat Covers, Canvas, Tarps
You don’t need to go to a custom repair shop to fix your canvas snaps – do it yourself with Ironwood Pacific’s Snap Setter Canvas Snap Tool! Replacing snaps with the Snap Setter tool If you are replacing a broken snap: Remove the old snap if it is still in place - it may just pull apart or you may need to remove it depending on how it failed. Place the snap dome on the concave anvil of the snap setter. Adjustable pliers design enables greater leverage over die-and-peg snap tools.
Reviews
"I used this setter and SS snaps to put snaps on my gazebo top because the top always comes loose from the wind and the hooks and straps wear out."
"This is a great little tool."
"I lined up the canvas to the fiberglass body, drilled a small hole thru both."
"This tool works so much better than the simple punch and hammer tools for installing snaps."
"Looks to be well made and heavy duty."
"One word: AMAZING!"
"This is a brilliant tool."
"Great tool to have when install Snaps."
Find Best Price at Amazon

Best Boat Cleaners

303 (30306) Marine UV Protectant Trigger Sprayer, 32 fl. Oz
Aerospace Protectant will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage. Safe and effective for: vinyl, Plexiglas, carbon fiber, rubber, plastics and finished leather.
Reviews
"I guess I expected it to bring back color but in all fairness, my van is a 2001 and sits in the sun....so I dont think anything will bring back that color."
"After reading a lot of reviews other places and by people with boats and RVs, I started trying 303 products."
"and how long the black top will stay black. i like this product because it water based so it doesnt harm your top, but in return you have to scrub a lil rather than just wipe ."
"Lasts longer than armor all and doesn't wash off as easily in the rain on exterior trim, three heavy rains over the last week and still looks halfway decent."
"Lasts months and protects great."
"My boat is 10 years old and I still have people amazed at the condition."
"The body, glass, rubber moldings and seals as well as the tires look great and are well protected."
"Looked good, it last for 4 weeks now."
Find Best Price at Amazon