Best Boat Trailer Guides & Rollers
50-Inch Boat Guide. Easy bolt-on mounting fits trailer frames up to 3-Inch x 5-Inch high.
Reviews
Find Best Price at Amazon"They are great guides for loading the boat but also work great as a visual guide when backing the empty trailer down the boat ramp."
"These poles were an exact match to what broke off my trailer."
"I bought these this spring after struggling to get my 19.5' boat centered on the trailer bunks the last two times I pulled the boat from the water."
"Needed these to help trailer or pontoon boat."
"I purchased these toattach to my vertical boat lift to help center the boat in the lift."
"These greatly help in backing up with the boat and/or trailer."
"Fit on a 14" Jon Boat trailer."
"These seem to be well built guides of sturdy PVC."
Because of the thinness of the coating less than 1 mm and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so its recommended that they be primed and painted. Guide-ons are 21" tall above the frame with 9" roller & 2" roller caps at top & bottom.
Reviews
Find Best Price at Amazon"I have some fine tuning to do at the dock when the boat is off of the trailer but it has already made loading my boat near center much easier."
"Have an older trailer, but it fit nicely."
"I got these to align the back of my boat on the HydroHoist at my dock."
"Does its job with a wide range of adjustability."
"Husband liked this purchase."
"Haven't mounted them on my trailer yet, but they are of great quality."
"went on easy!"
"The support bracket is not wide enough to install on a 3" beam when you run the bracket the along the 3" beam."
Mount the bar by flipping the lever on the suction cup, then settle the bow or stern of your boat onto the rollers while resting the other end on the ground. Offers a quick, easy solution for a single person to load a boat to a car top.
Reviews
Find Best Price at Amazon"The suctions cups stay in place but the bar wants to pop out since there is no locking mechanism."
"as long as you push a little bit hard before turning the sucking action bar down, it stays on the window solid."
"Height of lift was adequate for my old SUV but not for my current Subaru Forester, won't prevent my kayak from hitting the rear cowling."
"Good product fair quality, suction cups are ok, not great, much wider than expected, and the tube is not as tall as I would have wanted."
"This roller is a great idea and probably works well if you have an almost completely flat rear window."
"I have a Jeep Renegade and I couldn't use it."
"I ordered this for my previous vehicle but traded it in before water season here in Michigan."
"I've never had trouble with the suction and my back window has a slight curve."
Best Boat Trailer Tires & Wheels
The wheels easily lock up when not in use and just as easily fold down when ready for use. Push the stainless steel solid button to operate, Auto lock wheel arm system by Easy Sliding Transom Bracket.
Reviews
Find Best Price at Amazon"I put these on a 13' jon boat to do some adventure fishing and the result is really nice. The wheels float, and on my particular boat it takes a lot of hand strength to bend over the back of the boat, reach down under water to unclip them to swing them up because the flotation of the wheels fights against the lock a little bit."
"Most difficult part is unlocking the wheels from the down position once in the water."
"Smooth edges, smooth holes and countersunk bolt holes."
"Super thick gauge aluminum, nice fat tires, super light, good stainless hardware, locking mechanism is one handed, pull pin is cabled down so you wont lose it, oh and the rims are RED... how cool is that."
"This is the second time i buy these.I installed them on my zodiak 3.3 RIB with a 15hp mercury.I launch and retrieve the boat by myself,these wheels make it so darn easy.My uncle took one look at them and instantly asked me to order them for him.He now uses it on a 10 foot inflatable dinghy with a 5hp and is very happy with them, he can now take the boat from his house to the shore singlehanded.I highly recomend them and no i did not receive a discount or free item,Im just a very very satisfied customer."
"These wheels are great."
"Just bought my 2nd set for my other boat."
"Work as described, attached to stern of small boat for ease of transport to boat ramp."
Best Boat Trailer Hitches & Balls
This bolt-on ATV hitch adapter accepts ATV towing accessories with a 2" square drawbar. Heavy duty powder-coated steel construction resists rust and corrosion.
Reviews
Find Best Price at Amazon"I had no problems with this whatsoever and my standard, square-ended hitch receivers fit just fine without any modifications."
"I was able to put this on my Grizzly 350."
"Looked all over for something like this to bolt to my tractor for mounting a wench, just what the doctor ordered."
"Just what I needed at s great price!"
"should work on my max iv just fine."
"I love it."
"Unfortunately I've not been able to figure out a way to tighten the bolt enough to prevent the mount from swinging around all over the place."
Best Boat Trailer Winches
One piece corrosion resistant aluminum frame and one piece corrosion resistant aluminum handle.
Reviews
Find Best Price at Amazon"Great winch!!! I had replaced winches twice on my trailer with #2000 and #2400 winches but because out the weight it kept stripping them so this time I wanted to make sure there wouldn't be a problem."
"It's pricey, but this winch makes pulling the boat a few inches higher on the trailer much easier than the small winch."
"Excellent quality, A much better product then what was provided on the trailer from MagicTilt."
"Bought this winch to replace the winch on our boat trailer that got bent while hand loading our boat."
"we got this for our boat trailer and my boyfriend loves it works very well, does what its supposed to do, makes loading up the boat a lot easier."
"I expect it to outlast my last galvanized open drum Fulton and really like the aluminum housing and multi-adjustable winch handle."
"I broke the crank handle ( looks to be cast aluminum) the first time I launched after installing - my Columbia River anchor caught the handle and snapped it into."
"This is a very good quality winch and a definite back saver if you fail to back the trailer far enough into the water, and when you drive it on it stops short...making you crank the boat up farther...no worries at all if you have this winch."
Best Boat Trailer Tie-Downs
Size: 8pk Blue. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I've not been able to find these simple but effective tie-down straps at my local hardware store and even the "big box" store and when I have found something similar...they were way too expensive and/or not as well made and long (these are 12')...a nifty carrying bag too...a great deal."
"I use them to tie down my 18 foot hobie tandem island to the trailer.I was a little concerned that they wouldnt hold on a long trip but performed beautifully.They,re a great time saver verses ratchet straps.I was always worried about over tightening with the ratchet straps."
"Ordered 1 box last Christmas and when I bought more ornament boxes I ordered another set of these straps."
"Anyone who has memory foam mattress, this tool is ideal for packaging when you move. it bends the mattress and makes everything easy, but if you have 12-in thick memory foam, you probably need to vacuum your mattress."
"easy to unlock that is why I chose them the service was excellent as well I received them very fast this is the 2nd time I have bought some of these tie downs I needed more and they are easy to use."
"These Cartman 1" x 12' Lashing Straps are real handy for lashing and binding all sorts of things."
"I use these to strap a kayak to a roof rack."
"Good product."
Best Boat Trailer Lights
Off Road Lighting: Pickup,SUV,Truck,Trailer,Jeeps Forklift,Boat,4x4,Trains,UTV,ATV Other Lighting: Excavator,Crane,Mining,Tractor,Harvester,Grain Drill,Mower Snowplow,Dozer,Road Roller,Fire engine,Rescue Vehicle. It is perfect companion for different types of trucks, Jeep,SUV,ATV,Hummer/Pathfiner/UTE/4WD/Yamaha Viking/Dodge Ram, etc.Off-road vehicles, 4x4, Military, Mining, Boating, Farming, and Heavy Equipment etc. What You Will Get: Led light bar, mounting brackets, wiring harness, screw pack, 1 year warranty, life time support, and 24 hours online service.We are the only one authoritative seller of Rigidhorse, please indentify the store name-RigidhorseDirect before you place an order!
Reviews
Find Best Price at Amazon"Very bright, looks Great, good flood and spot pattern."
"great value."
"For the price it is no better than one that is half the cost."
"I can not do a complete review at this time as I have not installed the light bar yet however, shipping was on time, I did check to see that it worked and it worked properly."
"Too long for Chevrolet Sonic LTZ 2013 Sedan Low beam head lamp."
"Bright white daylight type of light makes it easier to see."
"So far they are great."
"Worked great on my 2006 Pontiac G6."
Best Boat Trailer Jacks
The Pro Series brand retaining ring swivel mount offers minimal deflection and maximum support. Sturdy 6" Poly wheel, 3/8" swivel pull pin.
Reviews
Find Best Price at Amazon"This was a great purchase."
"I got this tongue jack to replace the old, beat up one that came on my used Triton snowmobile trailer when I bought it."
"Excellent works great and the price is right."
"I have purchased several over the years, but this is the most heavy duty."
"Been busting a gut lifting my trailer off the hitch for years now and with a loaded trailer it wasnt always possible."
"Incredibly easy to install."
"Definitely on the lower end of trailer tongue swivels."
"I took it off and spend the extra 15 bucks on a good one locally."
Best Boat Trailer Bearings, Hubs & Springs
Bearing Buddy Bearing Protectors provide protection against damage from water and dirt entering the wheel bearings and make lubricating bearings a snap. Protection against damage from water and dirt entering the wheel bearings.
Reviews
Find Best Price at Amazon"Fortunately the failed bearing was on the right side, since the trailer was on the shoulder next to a guiderail on a busy 2 lane road (US 15 in MD) The bearing inner race was beginning to weld to the axle."
"I have always used bearing buddies even if the manufacturer does not recommend using them."
"Don't even bother thinking about cheap copies, that's what they are."
"I was uneasy about having to drive them that hard, but I suppose that means they’re unlikely to fall off."
"Put these on to replace my old Bearing Buddies from the 90's on my trailer."
"These are a great time saver."
"They fit perfectly (with the help of a 2x4 and big hammer) and look awesome."
"These are the original and work great."