Best Hunting Gun Monopods & Bipods
Legs are spring loaded, for fast deployment. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Two flaws: One, the tilt lock knob is impossible to hand-tighten, which is why everyone who buys this bipod also buys a replacement lever to make hand-tightening doable."
"The bipod is VERY sturdy. Recoil will back this out and cause the bipod to become loose."
"This item is built to last a lifetime!"
"These were on my gun in less than 30 seconds and I have never put one on before."
"Can't be beat, used them in the service, got this one for my 10/22 match."
"Bought several in the past that were flimsy and would rock back and forth while trying to hold steady."
"It's a Harris!"
"Very well made."
CVLIFE 6- 9 Inches Tactical Rifle Bipod Adjustable Spring Return with Adapter. Specification of the bipod: Color: Black Material: Hardened steel and aluminum Leg Height: 6 inches/ 152mm (retracted); 9 inches / 225 mm (fully extended) Light weight : 10ozs. Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
Reviews
Find Best Price at Amazon"Its a good looking bipod, with spring loaded legs that extend out to about 9 inches."
"Looks nice, works well great price..."
"It feels like it's worth $80."
"The legs have plenty of room to actuate without colliding with the crossbow's various elements, and the Allen wrench bolt in the thumb screw is a great touch to lock down the bipod assembly more snug than just with your fingers. Being able to steadily rest the bipod on my knee, log, branch, bench, etc., is a welcomed relief, and it's no longer a balancing act to keep the crossbow from listing back and forth."
"The springs that maintain the tension on each of the legs (to move them from their "up" position under the rifle barrel to their "open/deployed" position) are admittedly quite taut which can make their deployment a little loud if you do not maintain control of them as you bring them down, but I don't find that to be a detrimental failure by any means."
"I used the CVLIFE on my 24-inch Grendel for 500-plus meter shots before deciding that plunking $70 for a Harris bipod wouldn't be a waste of money."
"The 6” to 9” height of this bipod makes it ideal for shooting off bench tops and shooting from the prone position. Included in the box along with the bipod is a Picatinny rail adapter that will allow you to attach the bipod to any standard Picatinny rail system instead of a swivel stud. Even so, the ability to attach this bipod to both a swivel stud and rail system makes it extremely versatile in mounting options and can be easily moved between rifles."
UTG Tactical Op Bi-pod – Fits Swivel Stud & Picatinny/Weaver Rail, Foldable Arms with Robust External Spring Tension Control, Fully Adjustable Legs with Posi-lock Wheel & Quick Retraction Button, Center Height: 8.1”-12.7”, Leg Length: 7.9”-12.7”. Durable aluminum construction and a steel top platform hold up to years of heavy use, while a clever dual mounting design includes both Picatinny and swivel stud mounts. Includes panning, Posi-Lock, extendable/foldable legs, and dual mounts; rubberized stand; 13.3-ounce weight.
Reviews
Find Best Price at Amazon"The good: --- --- --- --- --- ---. I did find it a little odd, at first, that there are two distinct locking mechanisms for extending the legs. When you are ready to move again, simply push the front of the quick-release and the legs snap (pretty quickly) back to the fully retracted position. They adjust fairly quickly, though it is a challenge to hold the leg to the length you want AND turn the knob. I did not find it necessary to loosen the set screw to enable the panning feature. The thumb screw for attaching / removing the bipod to a Picatinny rail is easy to deal with and nicely sized. The tension springs that hold the bipod open and closed are strong. I was goofing around with the unit when it first arrived (off the gun) and accidentally snapped my fingers in between the springs and the metal (ouch)."
"The mount that is used for swivel stud installation has a nice foam pad on it that sits between the bipod mount and the rifle stock so no metal touches the wood (or laminate for that mater) stock. Once that is in place, there is a metal washer that goes over the swivel stud that you tighten down to secure the mounting plate to the stud and your rifle. You but the weaver mount on the bipod onto the new weaver mounting plate and tight down a single nut and voila - you have a bipod on your rifle. With the bipod installed, my rifle still fits nicely into my single scoped rifle plano case, which I also purchased on Amazon."
"I have seen the UTG brand fail miserably on other caliber rifles but I primarily shoot 5.56 and have never had a problem other than the retractable legs sticking because of sand."
"I waited a while to review this product because i wanted to see how long it would last before and if it would start to give me problem been going on a couple years and still works like its brandnew."
"However it doesn't swivel or cant like some other bipods, but that's what i wanted. A solid bipod that mounts solidly to a picatinny rail."
Best Hunting & Shooting Gun Stock Accessories
Adjustable to fit most stocks. Removable center pad to lower eye relief.
Reviews
Find Best Price at Amazon"The bottom is to long in the middle to get it real tight on a standard stock like my savage accustock but the front and back Straps will tighten down good and then I cut off excess."
"It fits my M1A Scout, mostly... Rear and forward straps fit tight and as designed. The extra velcro cover/bullet holder is a waste for me, but some may find it nice."
"Looks and feels great."
"The front strap went as expected, the rear strap I wrapped all the way around and attached to the left side of the stock, the middle strap I ended up looping under to the right side and only using the loop portion of the strap, I then covered it with the ammo carrier and that seems to be holding well."
"This is a very well thought out cheek raiser."
"Product is of good quality, but the straps are so freaking long and it is impossible to tighten on certain rifles."
"As others have said, it's a bit of a pain to get the middle strap in the right place."
"This works really well on an m14."
Best Hunting & Shooting Gun Grips
The 2-Pack Pearce Grip, Model PG-29-2PK replaces the magazine base plate and retains all other factory components on a Glock 29 magazine. Uses friction fit for retention.
Reviews
Find Best Price at Amazon"I also bought the talon grips as well and they sell a Pearce mag extension grip part as well for these."
"Design is excellent for its stated purpose - it's much easier to get a full 3 fingers on the grip with these compared to even the Ruger OEM extension. However, they definitely do print a bit more depending on your method of carry (I tried empty front jeans pocket, bare and in a DeSantis Nemesis). The "pin" in the bottom spring plate on my aftermarket (Pro-Mag) magazines does NOT fit in the hole in the Pierce extended baseplate."
"Slowly slide the plastic end off and keep one hand on the plastic end and the the other hand on the inside of the magazine so it does not spring out."
"They make the grip much more comfortable and controllable by adding enough length to the front of the grip, but not adding any to the rear of the grip."
"Not a bad extention, but it still does not give me as muck room for my pinky finger as I had hoped."
"I would have gotten these for all of my short XDS magazines, except that I occasionally carry in a Sneaky Pete "cellphone carrier," which requires both a short magazine and a flat baseplate."
"With the extension installed, that same gap is now zero. I measured the extension and original plate between the top of the channel, where it slides onto the magazine, and the top of the plate (where it would meet the pistol grip). The original measures ~ 2.8 mm and the extension measures ~ 3.2 mm."
Best Hunting & Shooting Gun Holders
The Lead Sled Solo has an integrated weight tray that will hold a single 25 pound bag of shot. The latest addition to Caldwell's line of recoil-reducing rests, the Lead Sled Solo provides a fraction of the recoil while securely holding your gun on target. And shooters will love the Lead Sled Solo's unique offset frame, which is designed to accommodate all rifles, including detachable magazine rifles as well as lever action guns. To attach the rifle, simply use the welded steel brace to secure the butt of the gun and the integrated front strap to secure the rifle to the rest. Greatly reduces recoil while keeping gun on target. Measures 26 inches long and 18 inches wide; weighs 14 pounds.
Reviews
Find Best Price at Amazon"Took this to a state park rifle range with a friend and used 2 ratchet straps to firmly secure it to the concrete shooting benches at the location (perpendicular to shooting direction)."
"I had a different Lead Sled purchased years ago that couldn't clear the pistol grip on an AR, or allow for a high cap mag."
"But, it would be nice if the front support arm was longer and had 2 or 3 holes to choose from, so the front support could be moved a bit for different length guns."
"Sled is light and easy to carry, use of 10-20 pound weight helps with recoil but it does have one problem, butt rest is sloppy."
"One thing about the large bag is that it will not fit down in the tray completely, preventing you from keeping a 30 round Magpul PMAG in your AR15, but it still serves it's purpose in keeping the Lead Sled from moving."
"I've used Bean bag mount in the past and this blows them out of the water for stability.The height adjust is a must for getting the sight on target 100 yards plus."
"I'm not totally sure it needs it with smaller calibers but I've been shooting 5.56, 5.45, .308 and 7.63x39 out of it with some noticeable jump which requires you to reposition the rest. This is easily and one handed shooter and the Velcro strap on the barrel rest works fantastic to keep the sights on target."
"There's plenty of level adjustments to work with."
Best Hunting & Shooting Gun Stocks
SGA Stock, Fits Remington 870, Black. Brings Magpul design and engineering to another classic American firearm.
Reviews
Find Best Price at Amazon"I loved that stock as well."
"If you are looking for a stock that has a user adjustable LOP to fit different shooters stature or gear requirements, and can help facilitate a modern squared shooting stance then this one of the best choices on the market."
"I thought this would be a nice way to make my gun easily adjustable for both me and my wife to shoot since the LOP spacers on the stock can be changed with one bolt."
"The grip angle is not as different from the Remington stock as I thought, so I was a little disappointed with that."
"So its well known that magpul makes greet stuff but this stock is the most amazing stock I have ever felt on an 870 and the length of pull adjustment makes it that much better."
"You will need a Phillips and a slotted screwdriver to remove your factory 870 stock and Magpul supplies you with the replacement bolt and a hex key to install the Magpul stock."
"Very good stock!"
"My favorite 870 Shotgun stock."
Best Gun Magazine Loaders
The Maglula UpLULA™ is a military-quality universal magazine loader and unloader designed for loading and unloading virtually all* 9mm Luger up to .45ACP magazines, single and double stack, of all manufacturers.It does so easily, reliably, and painlessly!Loads the following: Astra, Auto Ordnance, Barak, Beretta, Browning, Bul, Colt, CZ, EAA, FN, Glock, HK, Hi-Point, High Standard, Jericho, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordnance, Pheonix Arms, Ruger, Sigma, Sig/Sauer, S&W, Springfield Armory, Star, Steyr, Taurus, Vector, Walther, and more. Makes filling a magazine as easy as flipping a switch. Makes filling a magazine as easy as flipping a switch.
Reviews
Find Best Price at Amazon"Several reviews here state to load the first cartridge or even show it in a video using the magazine loader on the first cartridge and that is not the proper way to use this product. You are supposed to load the first cartridge into the magazine by hand and that is usually not a problem as the first cartridge is easy to load."
"I'd give this product 5 stars but I have only got to use it a couple times so far (it's been really cold this winter)."
"The UpLULA™ is a military-grade universal pistol magazine loader and unloader designed for loading and unloading virtually all* 9mm Luger up to .45ACP magazines, single and double stack and 1911’s of all manufacturers. (One SKU). Easy loading; the rounds just drop in with no fingers pushing or pressing them. Fits in hand and pocket, weighs only 72 grams (2.55 Ounce). Loads the following mags: Astra, Auto Ordnance, Barak, Beretta, Browning, Bul, Colt, CZ, EAA, FN, Glock, HK, Hi-Point, High Standard, Jericho, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordnance, Pheonix Arms, Ruger, Sigma, Sig/Sauer, S&W, Springfield Armory, Star, Steyr, Taurus, Vector, Walther, and more. .380 Bersa Thunder – Double Stack Loads & unloads well ! (Can also use the BabyUpLULA ™ ). * The UpLULA™ does NOT load the following: S&W 7rd 9mm SS for models 908,3913,3913,3953 & 3954 (Beak too wide, does not enter between lips). Glock G36 6rd .45 SS (Single Stack) (Beak will not come out of mag.). Rounds longer than 33mm, like: 9×23 Win, .38 Special, .357 Magnum, .357 Max., .41/.44 Rem."
"A Google search doesn't even bring up any results for that brand."
"I received a knockoff and will be returning it."
"Realized it was coming all the way from China & then canceled it!"
"Not maglula-- made in China "QBLOADER" brand knockoff product."
Best Gun Sights
Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"it blinded my wife for about 5 seconds so it gets 5 stars!"
"I've had this light on my P320 Compact Carry for some time now, have ZERO gripes about it."
"I went into my friends half-acre backyard and had them flash me from over 100 feet away and it made me feel instantly disoriented and I looked away. However, I have not shot the gun with the light attached yet so I can't quite talk about its durability, though Streamlight seems to have good reviews on that end. Also, the other night the strobe feature stopped working but I just emailed them, I'll post an update to this review to see how that turns out."
"Now, i understand that the scuff is a nit-pick, and It makes me feel guilty because i’ve heard countless great things about this device and the company behind it, but my 3-star rating will stand until I am able to properly use it."
"Very bright, mounted to my Glock 23 with ease."
"I looked for a long time and read various reviews before deciding to purchase this light for my Smith&Wesson M&P 9 Pro."
"I can't see paying $300 or more dollars for a flashlight from surefire or other competitors when this one does the exact same thing for such a good price!"
"All I can say here is that this light is blinding."
Best Gun Locks
Turn your steel ammo can into a secure locking case with Case Club's Ammo Can Locking Hardware. Stainless steel hardware which helps prevent rust, and no thread locking adhesive required!
Reviews
Find Best Price at Amazon"I bought a cheap (Neiko) titanium step drill bit (Bit #3 (9 steps): 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4") here on Amazon (you get three of them for like 12$), This particular bit can be used to drill through the latch hole and in to the case, and when you hit the 5/8" step on the latch you have the right sized hole for the lug in the case."
"I watched several videos on "You Tube" showing how to lock a Steel Ammo can and all of them have merit and do the job. It would be a good idea to first close the ammo box latch and then install the stud, checking for proper fit before tightening the inside lock nut."
"Heed their instructions well--if the hole isn't drilled exactly centered, the ammo can latch won't close, and then you're going to have to file or dremel the latch to fit the hardware."
"The lock stud diameter simply can't be drilled out to accommodate a larger Master lock."
"If you like your ammo can for toting your stuff to the range, this is a must have bit of hardware."
"Easy installation if you have a drill, bits and a step bit, from Harbor Freight for about six bucks, to enlarge the hole in the latch."
"I would prefer a flat surface inside the box so that a pressure point would not be present on the inside of the ammo box, but the box would still be water tight."
"Put them on all my ammo boxes, your going to have to do a bit of work fitting them but they are nice quality and make your boxes very secure."
Best Gun Swivels
Hd flush button models have recessed button to prevent accidental release.
Reviews
Find Best Price at Amazon"I like the recessed detached button, still easy to detach but out of the way to prevent any accidental detachment."
"Very good quality sling swivel."
"I started looking at the stock and thought to myself maybe these holes are for a quick detach sling swivel."
"Works perfectly!"
"I purchased this for my AR-15 Magpul CTR stock."
"This works well."
"Mounted into magpul base and screwed into carbine style stock."
"Would not hold even weight of standard rifle in both a MagPul CTR stock and an aftermarket QD Rail attachment."
Best Recoil Pads
Enhanced Buttpad, Fits CTR/ACS & Mil Spec MOE/CTR Stocks, Rubber, Black. Optional replacement butt-pad for the CTR and MOE Milspec stocks as wall as all STR, ACS-L, ACS, and UBR stocks.
Reviews
Find Best Price at Amazon"I mounted this on a LR-308 type rifle that I built and needed to extend the length of pull a about 1/2 inch."
"In conjunction with other recoil reducing upgrades (buffer, spring, comp) it all comes together to deliver a smoother firing AR and faster follow up shots."
"The buttpad comes with two extra screws with their own locktite on it, but I just re-used the screws that were used with the CTR stock buttpad."
"Fits onto my magpul .308 stock with no problems."
"I was looking for extra recoil protection and good looks."
"If you found this product, congratulations your either stupid lucky, or you've done your homework."
"This was easy to put on not difficult at all it works really good I tried it out really works I will definitely recommend it to anybody."
"I have fairly long arms and this item helps to make the stock more comfortable at the longest length of adjustment."