Best Cabinet & Furniture Pulls
1 Cosmas 305-030SN Satin Nickel Cabinet Hardware Euro Style Bar Handle Pull - 3" Hole Centers, 25 Pack
They do not make us charge unnecessary markups for their hardware like some of the other major brands do. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Heavy stainless great satin finish."
"Great handle pulls; however, out of a box of 25, one was not usable since it did not have a threaded insert in one of the holes."
"I was very surprised at the quality of this product, especially compared to similar overpriced products available at most local big-box stores."
"My neighbor just put the same style pulls in their new kitchen and the paid $4.50 a peice for them they can't beilve how much I paid and how great they look."
"I did have to use longer screws than what was offered, but that is due to having thick real oak cabinet doors and drawers."
"A few have some chips on them, I guess I could probably contact seller a bout possible replacement but overall they are great for the value compared to local store."
"Returned it because we opted for a different size, but the handles felt VERY solid and good quality, and looked really nice."
"Great price and the same product that you pay 3x's as much for at Lower or Home Depot!"
Cosmas® Hardware is the way to go when designing or fixing up your kitchen or bathroom. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"These handles are great!"
"Some of the screws were a bit hard to get in when I put the handles on the cabinets, but for the price I would deal with that minor frustration."
"Bought to replace the gold-tone hardware on my older RV."
"These cabinet pulls came very quickly!"
"Very good quality and such a great price."
"These are really nice pulls."
"NOTE- I used Benjamin Moore advantage to paint cabinets its awesome cleans well no top coat needed, but did use a primer by them that was almost a concrete consistency but holding up well."
"These drawer pulls are perfect."
Stylish design coordinates with many décor themes, strong and durable, these bar pulls can prove both functional and elegant through years of use. Our Process: These pulls are formed from a Solid cylindrical 1/2" Diameter Cold Rolled Stainless Steel bar, Index Tapped (for strength and precision), plated with a Nickel, hand brushed (provides the beautiful Fine-Brushed finish) then lightly polished to give it a semi gloss shine. These Cabinet Pulls are made of SOLID stainless steel bar, with a Fine-Brushed Satin Nickel finish.
Reviews
Find Best Price at Amazon"I'm in the process of updating my master bathroom and saw these online. Very heavy quality, all individually wrapped with the screws for each."
"Picked up 3 packages for my kitchen (62 handles) so had a few extras left over for the bathrooms or probably will drop off @ Salvation Army for whoever has a small kitchen."
"What a surprise, I assumed for the Price that they would be light weight, these make my whole kitchen beautiful."
"Fortunately I was able to use those ones for drawers, which were thicker and required me to purchase and use longer screws."
"And the price, ooh, la la."
"Liked that it came with 2 lengths of screws, although I used most of the existing screws since I was replacing brass handles already installed."
"I bought there for a house we are flipping."
"These really are SOLID BARS!"
Best Cabinet & Furniture Locks
The locks and latches are mounted inside of the cabinet, which is more aesthetically appealing than external hardware. Locks can be disengaged, using the convenient flip switch, during periods of necessary longer access. You don't need tools, as the 3M adhesive tape tightly secures the magnets in place, on the inside of cabinets. Although we offer the guarantee, we are sure that you will find these locks to be high quality and the best design on the market. Discover that with our innovative lock design, you can rest assured that these locks can fit any cabinet style, providing a hassle free purchase.
Reviews
Find Best Price at Amazon"Easy installation and work great, if you can't tell... someone's angry."
"Each lock also comes with an "off/on" switch which is great in case you need to get in and put back a few things in a certain cabinet and don't want to have to keep getting the magnetic knob. I'm so grateful for Safety Baby Cabinet Locks and I would definitely recommend this product to anyone that has little children."
"Was looking for a safe way to secure our cabinets but didn't want to damage the wood by having to drill a permanent solution. When I received the item, the first thing I noticed was how nice the locks and magnet were packaged. When I opened them up the actual lock is made of what feels like a heavy duty plastic. - I placed the first one on the cabinet and realized that I needed to move it down a bit. - My wife was concern that if this was a special type of magnet that if we lost it, it would cost us down the road to replace."
"The directions are clear, but choosing the location and fit where this would trigger the lock but also be easy to open with the magnet was a little tricky!"
"We needed to have baby locks on some low cabinets that housed some very good china."
"We primarily use these to keep baby out of most of the kitchen cabinets and place the magnetic "key" on our fridge."
"No hardware needed, nothing can be seen from the outside."
"Got these after a lot of hassle with some screw-in typed magnetic locks, and I am going to buy more of these kind!"
Best Cabinet & Furniture Knobs
The Amerock 25PK53005G10 Allison Value 1-1/4 in (32 mm) Diameter Knob is finished in Satin Nickel. Available in a variety of finishes and styles, Amerock offers high quality designs at affordable prices. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Screw).
Reviews
Find Best Price at Amazon"Very pleased!"
"These are good quality cabinet knobs for less than half the price at the big box home improvement stores."
"They are not long enough for a drawer where solid wood face plate has been screwed onto the drawer case (resulting in two layers the screw needs to go through)."
"I replaced the cabinet and drawer pulls in my utility room because I never liked the designer's choice (which was surprising given her excellent taste)."
"I painted the furniture using the Rust-oleum Furniture Transformations kit in Kona Unglazed (purchased for $35 and mixed at Home Depot; the paint has to be tinted in-store)."
"I replaced the corroded old drawer pulls in my bathroom with stylish Amerock pulls, removed the mirror wood trim and re-hung it cleanly with the CRL E-Z Mount Clip Set, replaced the wooden medicine cabinet with a cheap Zenith medicine cabinet after brushing its stainless trim with a ScotchBrite pad, and replaced the tarnished brass towel bars and shelf with affordable brushed nickel versions from Ikea. The Amerock drawer pulls were individually packed, ten to a blister pack, and the Amerock Cabinet Knobs were individually packed in plastic bags each with a bagged screw (that was often slightly too short because the threads in the knobs don't start flush with the base)."
"I do wish they were slightly larger - but that's my fault for not looking at the measurements stated more closely and I can't penalize in the review for that."
"My kitchen looks updated and the knobs cost a lot less than from the big box hardware store."
Best Cabinet & Furniture Hinges
To use this hinge the dimension (overlay) should be 1/2". Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"If the door is 1 inch larger than the opening then that is a 1/2 overlay and if it is 1 1/2 inches larger than the opening then that is 3/4 overlay."
"We weren't able to find the correct hinges at the store but were so happy to find them here."
"These turned out to be better than expected, takes me about 5 minutes to replace the existing hardware."
"I put two on every cabinet door which works well and closes slowly for heavy, tall cabinet doors."
"Very good hinges however make sure you purchase the right ones for the overlay of the door, nothing at all wrong with these, but ordered the wrong ones for the application, I did not understand the overlay instructions as these require, shipping was fast also, good price too."
"I was looking for a frameless hinge but i can't find one under Blum Compact Blumotion."
"Bought a few to try out and worked so well that we bought enough for every kitchen and bathroom cupboard."
"Instructions sketchy but Blumotion website has good instructions."
Best Cabinet & Furniture Latches
A Solid Cast Iron Cabin Hook / Latch that can be used as a decorative and useful latch for cabinets, gates, doors, garages, barns, sheds, and more. Rust Resistant Coating - Double the thickness of thin steel competition.
Reviews
Find Best Price at Amazon"A Very well made product and quite heavy duty and once I finish installing the barn door hardware to my bathroom I'm looking forward to. adding this little jewel to the finish product."
"this is attached to my fence great for keeping gate open when parking car on driveway."
"This became the latch in the front of my rustic wall mounted jewelry box."
"Adds a fantastic decorative touch."
"Great product."
"I Bought these for a set of barn doors I installed in my bathroom."
"I was looking for a way to secure a pair of sliding barn doors and this fit the bill perfectly."
"Latch is very rustic and rugged."
Best Cabinet & Furniture Door Catches
Box of 10 - 15lb single magnetic catches white zinc- retail packs. 1 #5x5/8" Flat Head Screw, and 2 #6x3/4" Pan Head Screws.
Reviews
Find Best Price at Amazon"A simple replacement for your Florida shutters or any other place you can use a magnetic catch."
"These were just okay for what i needed for but the screws on the striking plate didn't always fit snug against the plate so it allowed it to move a bit."
"Perfect replacement for the old magnets."
"These break easily, and I hardly ever open the shutters."
"Fits well / and does what it is supposed to do."
"my shutters stay shut again!"
"Excellent replacement hardware."
"DO NOT GET THIS - THE SCREW HEADS BREAK OFF 3/4 OF THE WAY INTO THE WOOD!"
Best Cabinet & Furniture Drawer Slides
This high-quality pencil drawer is ideal for new desks you are making or for retrofitting into an existing desk that does not have the convenience of a pencil drawer. The tray is 20-1/2'' wide x 16-1/4'' deep, minimum installation width is 23''. Extends 12-1/4'' leaving just 3" under the desk when mounted flush with the front of the desk. Easy to install into existing desks, increase your storage space in minutes!
Reviews
Find Best Price at Amazon"The drawer itself is one solid piece, others drawers I've seen have always had the sides that connect together and a bottom piece that slides into little grooves before you attach the back or front plate. It makes it a little tougher to open initially but if you tilt the table/desk forward your drawer wont fly open and spill all your stuff."
"If your desk has a lip underneath you will need to have a thin piece of wood and longer screws so that the back of the drawer is level with the front of the drawer. If you're lazy like me, and don't want to take everything off and out of your desk so that you can tip it on its side, then just make sure you have a magnetized drill bit / screw driver head because you will be on your back attaching the drawer and any additional wood pieces."
"Exactly what my desk needed for a few wires and USB sticks, raspberry pis, even a couple mini PCs scattered around my desk cluttering things up."
"Drilled small pilot holes on the marks, then held the drawer up again (with assistance from my wife out front of the desk) and drove in the screws."
"This easy to install drawer fit the bill."
"I drilled 2 holes, L/R, (only 1/4" deep) and then hung the drawer from them before drilling all the other holes. Just be sure you measure the first two holes correctly so the drawer is square with the desk. With the drawer 100% flush mounted to the edge of the desk, there is 4" of drawer still under the desktop."
"Not a biggie, but because the drawer is so thin (as in not deep) additional separators or trays will not fit."
Best Furniture Back Plates
Origami Shelf-Opens and folds in seconds, folds flat for easy storage, no tools required for set up, shelf capacity of 250 pounds on even level surface. per shelf on level surface evenly distributed or 75 lbs. Great for storage of any kind: Garage, Warehouse, Office, etc.
Reviews
Find Best Price at Amazon"When the big box arrived, I let it sit for a couple days until I worked up the energy to deal with having to put together a shelf unit."
"If you decide you want to move the shelf to another room, you can either roll it there or take the shelf back down to virtually flat in a couple of minutes."
"So far this makes six."
"No major tools required other than the tool already provided by Origami to screw in the wheels on the four legs of the shelf."
"I needed a rack for craft shows that was easy to set up/take down and able to be moved by one person."
"These are very sturdy, and so easy to put up."
"Used in garage great item it did take all of 10 minutes to snap in place you will love this brand would never buy another brand again."
"Not powder coated (only complaint), but it does do all the origami tricks it's supposed to do."