Best Electric Motor Mounts & Accessories
1 Central Door Lock Actuator Motor FC-280PC-22125 FLAT SHAFT, D Spindle, Power Locking Repair Engine
Door Lock Motor Replaces Mabuchi, Nichibo Brand--------------- SIZE SPECIFICATIONS: Shaft: FLATTED - 2mm diameter x 10mm long --- Canister: 24.2mm Diameter (18.3mm on flat sides) x 30.5mm long --- Overall Length: 45mm (Tip to Tail) --------------. D-Shaft Version - Flat spot on shaft for gear attachment.
Reviews
Find Best Price at Amazon"You'll need to pry this apart to get the latch removed. * Be careful opening the clamshell; some of the internal parts are not held down by anything aside from the clamshell itself."
"if you plan to attempt this repair yourself on a 2014 rav4, first ask yourself if you are good are opening abs clamshell housings without breaking the square profiled clips that they snap together with. after watching all the videos i could find related to this repair, the entire process took me 2 hours - but i be more mechanically inclined than most."
"There are plenty of videos online that will point you in the right direction, and you'll be happy when the lock is functioning again without emptying your wallet."
"Take lots of pics with your phone when you take the lock motors out and disassemble motor housing."
"Worked perfectly in a 2012 Toyota Tundra passenger side door."
"I worked my way around the clips and pried open the case just enough to remove the motor."
"Replaced the 2 front actuator motors on a '13 Camry LE."
"These worked great on my sister's 2012 Lexus is250."
Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft (direct drive) to cool motor. Applications: Fans, Blowers, Fireplace Blowers, Attic Fans, Humidifiers, Ventilators.
Reviews
Find Best Price at Amazon"Easy installation to replace a normal switch."
"After researching the installation manual a bit more, I was able to find the part number for the Kozy Heat controller, and even found one available online. I installed mine in a plastic 'wall outlet' box sitting on the metal plate with the fireplace controls."
"I installed an inexpensive bathroom vent fan, to move air through the small room, but those fans are quite noisy, and move more air than I need."
"This switch was a great improvement over the old one."
"There is a noticeably louder AC hum, so I’ll have to do a better job mechanically isolating the fan mount."
"I desired to replace a simple on/off switch for my fireplace fan motor with a variable speed control."
"Fairly useless for a ceiling fans, as it causes a lot of noise when not set at full speed."
"Just what I needed."
It's good ideal for 3D printers, as well as CNC and robotics applications. Important notice: Some customers reported they bought this model from other seller under this listing, but found much of difference with our description(no connector and shorter leads). * Frame Size: 42 x 42mm. * Body Length: 48mm. * Shaft Diameter: 5mm. * Shaft Length: 24mm. * D-cut Length: 15mm. * Number of Leads: 4. * Lead Length: 1m with connector. * Weight: 390g. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Used to replace my stepper motor in my Rostock MAX v1 to pair with my Titan Extruder."
"I've had it running for a few hours around 1A, just a little bit warm nothing too hot."
"I used them for Arduino robotics project and you can't beat the price/quality."
"Yep its good."
"Fixed a bad stepper in my RigidBot."
"Using on a CNC router."
"Functionally great; solidly packaged."
Best Electric Motor Accessories
Door Lock Motor Replaces Mabuchi, Nichibo Brand--------------- SIZE SPECIFICATIONS: Shaft: FLATTED - 2mm diameter x 10mm long --- Canister: 24.2mm Diameter (18.3mm on flat sides) x 30.5mm long --- Overall Length: 45mm (Tip to Tail) --------------. D-Shaft Version - Flat spot on shaft for gear attachment.
Reviews
Find Best Price at Amazon"You'll need to pry this apart to get the latch removed. * Be careful opening the clamshell; some of the internal parts are not held down by anything aside from the clamshell itself."
"if you plan to attempt this repair yourself on a 2014 rav4, first ask yourself if you are good are opening abs clamshell housings without breaking the square profiled clips that they snap together with. after watching all the videos i could find related to this repair, the entire process took me 2 hours - but i be more mechanically inclined than most."
"There are plenty of videos online that will point you in the right direction, and you'll be happy when the lock is functioning again without emptying your wallet."
"Take lots of pics with your phone when you take the lock motors out and disassemble motor housing."
"Worked perfectly in a 2012 Toyota Tundra passenger side door."
Best Electrical Motor Controls
Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft (direct drive) to cool motor. Applications: Fans, Blowers, Fireplace Blowers, Attic Fans, Humidifiers, Ventilators.
Reviews
Find Best Price at Amazon"My blower didn't come w/the majestic scvs (variable speed control) so I bought this to replace the on/off switch I had."
"I installed an inexpensive bathroom vent fan, to move air through the small room, but those fans are quite noisy, and move more air than I need."
"This switch was a great improvement over the old one."
"There is a noticeably louder AC hum, so I’ll have to do a better job mechanically isolating the fan mount."
"I desired to replace a simple on/off switch for my fireplace fan motor with a variable speed control."
"Fairly useless for a ceiling fans, as it causes a lot of noise when not set at full speed."
"This item does what it is designed to do, but I cannot use it for what I wanted it for."
"This speed control is used to adjust the speed of a small motor used to inflate a 2 layer greenhouse cover."
Best Electric Motor Mounts
It's good ideal for 3D printers, as well as CNC and robotics applications. Important notice: Some customers reported they bought this model from other seller under this listing, but found much of difference with our description(no connector and shorter leads). * Frame Size: 42 x 42mm. * Body Length: 48mm. * Shaft Diameter: 5mm. * Shaft Length: 24mm. * D-cut Length: 15mm. * Number of Leads: 4. * Lead Length: 1m with connector. * Weight: 390g. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Used to replace my stepper motor in my Rostock MAX v1 to pair with my Titan Extruder."
"I used them for Arduino robotics project and you can't beat the price/quality."
"Yep its good."
"Fixed a bad stepper in my RigidBot."
"Functionally great; solidly packaged."
"I've had it running for a few hours around 1A, just a little bit warm nothing too hot."
"These motors are working fine in my application."
Best Electric Fan Motors
This bathroom fan motor assembly kit includes a bracket, motor and blade. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"It saved me time, effort and money or replacing the whole fan/light unit and the requirement of modifying the opening and switching for the new unit."
"Original Review 10/2016: The fan motor on a 16-year-old fan had stopped working."
"Not sure what happened to the original fan installed, or the replacement, but both only lasted about 6 months."
"I've done very little electrical type work at all in my own house, and frankly, was a bit intimidated."
"The only thing I found was that the spaces where the plugs come through was different than mine."
"I just had to make sure I order the right model as there are many different model numbers."
"Checked out Lowe's and Home Depot but they only sold whole units (fan, motor, light, and outside light cover) for a lot more than just the motor, fan, and mount cost here."
"I'm in a trailer, and things rarely fit properly when you replace them."
Best Permanent Magnet Motors
Specification: Rated voltage: 12V. Motor Body Diameter: 28mm/1.1inch. Total Length(Included Pin): 58mm/2.3inch. No-load speed: 10000 r / min. Shaft Size: 13 x 2.3mm/0.51in x 0.09in (L*D). Motor Body Length: 37mm/1.46inch. Material: Metal, Electronic Parts. Color: Silver Tone. Weight: 64g. Package Content: 1 x Torque Magnetic Mini Electric Motor.
Reviews
Find Best Price at Amazon"Very useful for learning electronic basics."
"When it arrived i noticed it was alittle bigger then the motor i took out of the mechanism. The vent motor was broke anyway so I figured I try to make it work. Beats paying $40 dollars and up for "each" new window vent motor.They've been broke for about 5 yrs."
"I had 3D printed an R/C model car and I needed a 12V motor for the drive wheels."
"Good price, matches description, and works like it should."
"This is an awesome item especially for repairs."
"Nice one that has a perfect quality and I must say that it deserves a five stars rating!"
"Ordered 3 of these, 2 of them arrived broken."