Best Expansion Shield Anchors

The Wej-It MS14 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands around the anchor's cone base when the included setting tool is inserted, holding the anchor in place within the mounting material.

Shield protects your walls and floor from soap spills and stains, helping to keep your restroom clean.

KeySmart products may not be sold on Amazon, ebay or any other website not owned by the dealer. Enter your model number to make sure this fits.

The Wej-It MS14 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands around the anchor's cone base when the included setting tool is inserted, holding the anchor in place within the mounting material.

Once installed a 1" clearance from the wall provides easy access and space for cords and cables. Once removed all that is left behind are tiny pinholes that can be easily covered up. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. Wont damage walls, installs with tiny picture hanging nails. Easy tilt for access to cables. Only tools required are a hammer and a screwdriver. Installs using tiny picture hanging nails.

The actual item may not be an exact match with the image shown, but should be similar.

Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. One Piece, tamper-proof anchor for use in concrete, block, brick or stone.

The anchor diameter equals hole diameter, with 1/4 - 3/4 inch diameter anchors available, up to 6-1/4 inch length. Specs: Anchor Diameter and Drill Bit Size - 1/2-Inch inch; Effective Anchor Length - 4 inch; Bolt Diameter - 3/8 inch; Threads per Inch - 16; Min. Enter your model number to make sure this fits.

The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening. Media. Drill Diameter. Bolt Description. Ultimate Tensile Strength Values. Ultimate Shear Strength Values. 1/2" Drywall. 1/2". 3/16"-24 UNC zinc-plated steel. 238 lb. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.

Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete. Enter your model number to make sure this fits.

The Master Anchor with Hook Plate utilizes a # 8 stainless steel screw which is an ideal size for most bathroom accessory items and window dressing brackets. Install using the Apache200 Drill Bit (RC-WA200GTS34) to drill through the material easily with your cordless drill.

Aluminum Tamp Tool For Installing Brass Anchors.

Starts easier than other drywall anchors, drills directly into drywall even if you hit a wood stud.

Built-in "positive-stop" prevents over-driving the anchor when using a screw gun or hand drill. When activated with a screw anchor opens with an audible pop locking the anchor on the wall. head, 5/16" dia., 1-5/8" length Higher load-bearing capability and screw size range than other self-drilling drywall anchors Built-in positive-stop prevents over-driving the anchor when using a screw gun or hand drill Activate and lock with an audible POP, providing positive feedback that they are installed correctly Resist vibration and shock Provide high pull-out resistance Do not back out of the wall when the screw is removed Can be removed easily, without damaging wall Unique tip prevents "walking" to ensure accurate and easy drilling When activated with a screw anchor opens with an audible pop locking the anchor on the wall Drywall gypsum & its paper are kept in compression & thereby immediately reinforced Built-in positive stop that prevents overdriving the anchor when using a screw gun. Enter your model number to make sure this fits.

3/8" X 4-1/2" T-Anchors - for hollow cavity applications (Pack of 12). Enter your model number to make sure this fits.

The Wej-It Ankr-TITE ATS wedge anchor with 304 stainless steel body provides a secure hold in solid masonry and uncracked concrete, meets Federal Specifications QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code. The anchor body, washer, nut, and clip are made of 304 stainless steel for increased corrosion resistance compared to galvanized or zinc-plated steel anchors. It must be installed into a drilled hole with a diameter equal to that of the anchor to an embedment depth of 2-1/8" or greater. The washer lies flush against the mounting surface when the anchor is inserted into the hole, and the nut tightens with a wrench to draw the threaded portion of the anchor up, causing the clip to expand and secure the anchor in place. The clip has large dimples that provide traction to reduce slippage and increase hold in lightweight concrete. The dog point prevents damage during installation, and the safety shoulder above the clip provides support when the anchor is under severe strain. Specifications Ultimate Tensile Strength for Static Loads. Anchor Diameter. At Embedment Depth. 4,000-psi Concrete. 6,000-psi Concrete. 1/4". 1-1/4". 2,000 lb. Ultimate Shear Strength for Static Loads. Anchor Diameter. At Embedment Depth. 4,000-psi Concrete. 6,000-psi Concrete. 1/4". 1-1/4". 2,811 lb. Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes. Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.

Use Tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more. Use Tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters, and more. Enter your model number to make sure this fits.