Best Power Concrete Mixers

Co., Inc. has been a driving force in the continued growth and modernization of specialty tools, especially those found in the flooring installation markets, since 1979.Qep Tile Tools 61205 Super Mixer Features: Preferred by professionals for fast and easy mixing of grouts, thinsets and other setting materials Fits standard 1/2" or 3/8" drill chucks Chrome plated for easy clean up Carded 22" length. Preferred by professionals for fast and easy mixing of grouts, thinsets and other setting materials.
Reviews
Find Best Price at Amazon"Five gallon bucket, basic mortar mix, sand or dirt to stretch the mortar further, a strong 1/2" drill 5 amps or stronger and this grout mixer are all you need."
"I had a big paddle for mixing before, but saw this one being used on a youtube video I watched on drywalling and decided to try it."
"Good for at least half of bucket and will need 1/2" good drill to not burn the motor."
"Worked great from mixing up mortar and grout in a 5 gallon bucket."
"This plus a hammer drill and hex adapter made a perfect solution for mixing up a ton of mortar and plaster that I needed for a project in my crawlspace."
"Works well but on the large size."
"Works good, using it to mix up ten pounds of thinset mortar at a time."
"It worked but not as well as the other style mixers."

The Kushlan Products 600 Direct Drive Mixer is filled with features that make this rugged mixer affordable yet ideal for the do-it-yourselfer and professional.
Reviews
Find Best Price at Amazon"had no issues assembling but they should include the gear oil with the unit...it's not a mixer until it can mix."
"This unit replaces an older unit that has performed amazingly for years."
"mixed 16k pounds of concrete in this without a single issue."
"Mixed 90 eighty pound bags and finished up in about 5 hours."
"Used it for fence posts."
"Very easy to assemble."
"Good product its the same like a picture."
"Worth the money."

This full sized 20 inch mixer uses its 4 inch fans to efficiently mix large amounts of mortar, cement, grout, or many other industrial mixes with ease. MIX ALL YOUR MATERIALS WITH ONE TOOL. The mixing bit can meet pretty much all your materials needs.
Reviews
Find Best Price at Amazon"In my opinion, this paddle is perfect for mixing all types of liquids in a 5 gal bucket but I would not recommend using it to mix stuff like mortar or cement unless you have a heavy and powerful tool for this paddle and you don't plan on mixing more than 3-5 gal in one shot."
"I mix 30 pounds of concrete in 5 gallon bucket like it's nothing, this thing is amazing I just bought a second one, I finally wore the first one out."
"This really worked to mix deck brightner in a 5 gallon pail."
"Am very impressed with this mixer, the first thing I mixed was mortar, don't think a plastic one would have held up."
"I just have to hold the shaft of the mixer in the socket adapter as it tends to fall out when it is spinning."
"Used for both thin-set and for non-sanded grout."
"Mixed several bags of concrete with this in a 5 gallon bucket."
"It seemed to take too long to mix even with a heavy duty drill."
Best Power Concrete Vibrators

AVT Breaker Hammer (model HM1812) is engineered to hit like an air hammer, but with less noise and vibration. Efficient 15 AMP motor with improved hammer mechanism delivers 53.9 ft.lbs./72.8 joules of impact energy to handle the most demanding applications.
Reviews
Find Best Price at Amazon"Many aching muscles later, with the job half done, I changed to the Makita HM1812X3 70lb Advanced AVT Breaker Hammer (what a mouthful)."
Best Power Tile & Masonry Saws

- Stainless steel table top - resistant to corrosion - Adjustable rip fence with miter gauge - for accurate straight and miter cuts - Bevel cuts tile from 0 to 45 degrees - flexibility for different cut types - Blade cooling water reservoir - keeps blade cool and minimizes dust and debris\nWe are an authorized SKiL dealer. Cross Cut Capacity: 7.75-in.
Reviews
Find Best Price at Amazon"After ordering it and using it to make about 20 or so cuts, I can say it cuts very cleanly and easily."
"I've used the $75 one at home debot (yellow, can't remember brand) which is total garbage and good for one job at best. Even my $650 Ridged would hit me in the face with a piece now and then, this never seems to, even when I have my head down six inches from the blade, looking at a cut closely. To be honest, when it comes to making that "perfect cut", I really don't use the laser guides, measurement tools and all the fancy stuff on a high end saw anyway."
"As I expected this is not a professional/contractor tool by any means. but for the DIY homeowner it is good value for money, simple and surprisingly capable. The saw is super easy to clean up with a garden hose at the end of each cutting session. I am still using the original saw blade. The fence adjustment can be a bit awkward initially but you soon get the hang of it. I called the SkilSaw parts department and they shipped a replacement. to me right away at minimal cost(seven dollars). UPdate: 2 and a half years since original purchase and another tiling job just finished!"
"Yes, it's not the quality of a $300 saw, the base is plastic, the fence is a little flimsy and the deck could be a little thicker to give me a sense the saw would last a long long time, but it cut the tile without any hesitation, nice straight cuts and let me do so without going the rental center & paying almost as much (after getting their insurance because I am afraid their unit would die and they'd blame me -- who wants that grief for a one time use)."
Best Power Demolition Drills & Hammers

For increased versatility, it can be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete. Features extreme protection technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions.
Reviews
Find Best Price at Amazon"The small batteries will put in at least 250 1-1/2 inch screws through metal and into wood. (I slam the screw down hard enough to start it through the metal) I put a short zippy screw though the switch to hold it in place."
"I am a big Makita guy and have multiple toolboxes filled with tools and chargers for any occasion but to put one in his hands ad see it last this long is a miracle."
"This looks to be a great drill."
"I'm not super handy with tools, but this drill works great!"
"Beast!"
"Bought this so I would have a battery and charger for the Makita blower."
"Love this tool."
"I like the convenience of the light when working in dark spots."