Best Power Construction Staplers
Includes: Stapler; Graphite Mallet; Pre-Finished Flooring Adapter Foot & 1/2" and 3/4" Base Plates. The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them. Lightweight, Durable Construction for Everyday Use The MIIIFS Pneumatic Floor Stapler's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts. 1-1/2-inch to 2-inch pneumatic flooring stapler for driving flooring staples.
Reviews
Find Best Price at Amazon"My husband and I bought this stapler to install hardwood flooring throughout our 3000 sq ft home - we figured renting would cost us more as we had so much do to. Upon inspection of the other pneumatic machines at Home Depot (including the Stanley Bostitch Pneumatic Floor Stapler) - it was the ONLY machine that would require an adaptor, all others were standard."
"The previous iteration I'm familiar with required you to balance the stapler on the tongue of the new floorboards. One downside is that this new roller mechanism is rather wide, extending 2 or 3 inches out on either side of the base plate. The other difference I noted is that you seem to have to smack this model harder in order to get the staple deep enough in."
"You can also align and tighten the floor planks by tapping on this adapter foot directly, no need for a piece of 2x6. If you do not want to use this, or do not have it, or want to get close to the wall, then tape (blue painter's tape) all sharp points of the tool including the bottom shoe and voila no scratching of your new installed floor."
"Take note the brand new units come with a large pre-finished flooring foot, 1/2", 5/8" and 3/4" (white) base plates, two allen wrenches and users manual. But more importantly, the pre-finished floor foot works against the tongue of the board to distribute the force over a much larger surface area vs. a much smaller area of pre-finished edge if you don't use the pre-finished foot. Had I done this without the pre-finished foot, I'm almost certain it would have damaged the red oak I'm working with. Factory-reconditioned units (at least the one sent to me) do not include the pre-finished foot, so figure at least another $50 for this accessory if you don't buy brand new."
Includes a large, molded-plastic carrying case with room for an extra box of staples and other small tools. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Good product but only uses one size staple."
"Electric staple gun works so easily was delighted."
"Great staple gun."
"After several months of use this product began to fire without shooting out any staples."
"excellent Roberts staple gun."
"UPDATE: Well about a year after we got it back from the warranty repair, the mechanisms for the loading spring started to fall out of the gun. It didn't fail at first, but after a couple loads of staples, they started to just fall out of the bottom of the gun and fail to shoot after the first 2-3 staples."
"I am sorry to say the company itself has been great about replacing the item but I am now on my second one in a short period and having issues with the product not firing or freezing up.... we use the correct nails as I ordered with them and still having problems but I am past my return deadline."
"My $29 Stanley stapler is more reliable."
NPT, Length 15-1/4 In., Width 3-1/2 In., Height 10 In., Tool Weight 5.3 lb., Features Robust Firing Valve Design, High Strength Composite Magazine, Metal Magazine Guide, Positive Locking Adjustable Depth of Drive, Ez Clear Latch'.
Reviews
Find Best Price at Amazon"Excellent, excellent, excellent."
"These I will use: I hate it - I don't like it - It's okay - I like it..."
Best Power Construction Staplers
Includes: Stapler; Graphite Mallet; Pre-Finished Flooring Adapter Foot & 1/2" and 3/4" Base Plates. The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them. Lightweight, Durable Construction for Everyday Use The MIIIFS Pneumatic Floor Stapler's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts. 1-1/2-inch to 2-inch pneumatic flooring stapler for driving flooring staples.
Reviews
Find Best Price at Amazon"My husband and I bought this stapler to install hardwood flooring throughout our 3000 sq ft home - we figured renting would cost us more as we had so much do to. Upon inspection of the other pneumatic machines at Home Depot (including the Stanley Bostitch Pneumatic Floor Stapler) - it was the ONLY machine that would require an adaptor, all others were standard."
"The previous iteration I'm familiar with required you to balance the stapler on the tongue of the new floorboards. One downside is that this new roller mechanism is rather wide, extending 2 or 3 inches out on either side of the base plate. The other difference I noted is that you seem to have to smack this model harder in order to get the staple deep enough in."
"You can also align and tighten the floor planks by tapping on this adapter foot directly, no need for a piece of 2x6. If you do not want to use this, or do not have it, or want to get close to the wall, then tape (blue painter's tape) all sharp points of the tool including the bottom shoe and voila no scratching of your new installed floor."
"Take note the brand new units come with a large pre-finished flooring foot, 1/2", 5/8" and 3/4" (white) base plates, two allen wrenches and users manual. But more importantly, the pre-finished floor foot works against the tongue of the board to distribute the force over a much larger surface area vs. a much smaller area of pre-finished edge if you don't use the pre-finished foot. Had I done this without the pre-finished foot, I'm almost certain it would have damaged the red oak I'm working with. Factory-reconditioned units (at least the one sent to me) do not include the pre-finished foot, so figure at least another $50 for this accessory if you don't buy brand new."
Best Power Finish Staplers
Ergonomically designed simple flip actuation switch allows easy transition from single actuation to contact actuation Tool-free depth adjustment allows for a professional finish with varying materials- simple dial in the desired depth and efficiently finish the job Equipped with a non-slip elastomer grip trigger Tool-less, easy to clear nose for quick and simple staple extraction should a staple jam 360 degree adjustable exhaust can be directed away from the user in any direction 2.3 lbs, lightweight and well-balanced for ease of use No-mar tip included to prevent scarring and denting of a work surface Factory installed air fitting is angled upward to conveniently keep the hose away from the user and off the work piece High capacity magazine holds up to 100 staples for maximum efficiency. The Hitachi N3804AB3 1-1/2-Inch 18-Gauge Narrow Crown Finish Stapler is the ideal stapler for internal and external trim, furniture, cabinet work and other fine finish applications. Ergonomically designed simple flip actuation switch allows easy transition from single actuation to contact actuation. Tool-free depth adjustment allows for a professional finish with varying materials- simple dial in the desired depth and efficiently finish the job.
Reviews
Find Best Price at Amazon"The external staple track felt a little odd compared to my other air fasteners that have closed slides, but no problems in use. Many of the nailers have the same styling as this and the give away is the front release latch for getting to the feed area (used for jams on other tools...not needed so far on this one!). Open your wallet, cuss a little at the price, and buy this crown stapler."
"I bought this to aide in putting up a fence."
"As one user said, this thing could be overpowered unless you play with the psi or adjust the drive depth (I haven't messed with this feature)."
"I used to drive nearly 1000 staples on one project."
"So far so good."
"Excellent reliable staple gun."
"Great little tool, never jams and very light."
Best Power Upholstery Staplers
Bead offers the complete range of fastening solutions for all industries. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The Stapler is not working. Have to return it. Uptade: Sorry for the bad review...later on, when I ordered another BeA Stapler one from different seller, I realized, I just had no clue how to load it."
"I used this tool for the first time yesterday, to reattach some antique damask that we had recently conserved for reuse on the antique chair frames."
"I use this for professional upholstery work."
"Not usually a Bea fan but this was the only upholstery stapler I could find with an extended nose."
"This Stapler is awesome, very well made."
"High quality, professional grade staple gun."