Best Power Siding Nailers
Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2"). This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem. The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. Lightweight, Durable Construction for Everyday Use Finish the job without breaking a sweat. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite. Adjustable depth guide sets nails to desired depths quickly and conveniently.
Reviews
Find Best Price at Amazon"This nail gun worked well, the way it ships some people mentioned that you can have double or even triple shots, I did experience this."
"I had a medium sized area of water damage on the exterior of my house that needed repair. Being a homeowner/DIY'er, I didn't want to spend a small fortune on a tool that won't see too much action. I compared a few different brands and narrowed it down to the Freeman PCN65 Coil Siding Fencing Nailer and the Bostitch. Depth adjustment was easy, and once set, no issues marring or splitting shingles. Loading is easy, I used these Grip Rite Prime Guard Max MAXC62872 15 Degree Wire Coil 1-1/2-Inch by .09-Inch Ring Shank, Stainless Steel Siding Nails 1,200 Per box nails. Only downside is, you'll also have to order a quick connect plug for air, which is a little disappointing, oh well."
"Not quite 5 stars because it loses the nail feed periodically, maybe 4 or 5 times per full roll of nails and I was using Bostitch brand nails specifically recommended for this nailer."
"The original trigger that I use is awesome, I can either hold the trigger down and just apply pressure with the tip to nail (my favorite) or I can simply take my time apply pressure then pull the trigger."
"Just finished a siding project using this nailer for the the first time."
"The only issue I have was that the nail set dial has no numbers or gauges of any sort."
"Had a few jambs, but I don;t think that is unusual, they were easily cleared."
"It runs fast, and the wife accidentally had a triple tap on her first try (tried to hold and fire it using the bump fire trigger and didn't expect the recoil), but otherwise didn't have a single problem."
This item is Malco SRT2 Straight Handled Siding Removal Tool .
Reviews
Find Best Price at Amazon"the protective coating prevents slippage, but it isn't rubber which helps."
"), & learned that there is a "zip tool" to help remove vinyl siding."
"Had never worked with vinyl siding before, but I needed to add/replace some on my house."
"Works Great at taking down vinyl."
"Just what I needed for easily providing access to accommodate correcting, adjusting and/or removing siding panels for the purpose of upgrades and repairs."
"Worked as described."
"If you own a house with vinyl siding, do yourself a favor and get this handy little tool."
"A little expensive for what it is."
Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2"). This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem. The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. Lightweight, Durable Construction for Everyday Use Finish the job without breaking a sweat. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite. Adjustable depth guide sets nails to desired depths quickly and conveniently.
Reviews
Find Best Price at Amazon"This nail gun worked well, the way it ships some people mentioned that you can have double or even triple shots, I did experience this."
"I had a medium sized area of water damage on the exterior of my house that needed repair. Being a homeowner/DIY'er, I didn't want to spend a small fortune on a tool that won't see too much action. I compared a few different brands and narrowed it down to the Freeman PCN65 Coil Siding Fencing Nailer and the Bostitch. Depth adjustment was easy, and once set, no issues marring or splitting shingles. Loading is easy, I used these Grip Rite Prime Guard Max MAXC62872 15 Degree Wire Coil 1-1/2-Inch by .09-Inch Ring Shank, Stainless Steel Siding Nails 1,200 Per box nails. Only downside is, you'll also have to order a quick connect plug for air, which is a little disappointing, oh well."
"Not quite 5 stars because it loses the nail feed periodically, maybe 4 or 5 times per full roll of nails and I was using Bostitch brand nails specifically recommended for this nailer."
"The original trigger that I use is awesome, I can either hold the trigger down and just apply pressure with the tip to nail (my favorite) or I can simply take my time apply pressure then pull the trigger."
"Just finished a siding project using this nailer for the the first time."
"The only issue I have was that the nail set dial has no numbers or gauges of any sort."
"Had a few jambs, but I don;t think that is unusual, they were easily cleared."
"It runs fast, and the wife accidentally had a triple tap on her first try (tried to hold and fire it using the bump fire trigger and didn't expect the recoil), but otherwise didn't have a single problem."
Best Power Siding Nailers
Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2"). This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem. The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. Lightweight, Durable Construction for Everyday Use Finish the job without breaking a sweat. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite. Adjustable depth guide sets nails to desired depths quickly and conveniently.
Reviews
Find Best Price at Amazon"This nail gun worked well, the way it ships some people mentioned that you can have double or even triple shots, I did experience this."
"I had a medium sized area of water damage on the exterior of my house that needed repair. Being a homeowner/DIY'er, I didn't want to spend a small fortune on a tool that won't see too much action. I compared a few different brands and narrowed it down to the Freeman PCN65 Coil Siding Fencing Nailer and the Bostitch. Depth adjustment was easy, and once set, no issues marring or splitting shingles. Loading is easy, I used these Grip Rite Prime Guard Max MAXC62872 15 Degree Wire Coil 1-1/2-Inch by .09-Inch Ring Shank, Stainless Steel Siding Nails 1,200 Per box nails. Only downside is, you'll also have to order a quick connect plug for air, which is a little disappointing, oh well."
"Just finished a siding project using this nailer for the the first time."
"Had a few jambs, but I don;t think that is unusual, they were easily cleared."
"It runs fast, and the wife accidentally had a triple tap on her first try (tried to hold and fire it using the bump fire trigger and didn't expect the recoil), but otherwise didn't have a single problem."
"I did not have this problem withe 2" nails (I think the nail alignment stays truer with the 2" nails)."
"The home improvement guys were out of the Bostitch nails so I bought Senco galvanized ring-shank nails. Also, many of the nails the wire would get shot with the nail, and stick out the top of the nail. I wish I'd been able to try a couple different kinds of nails or talk to someone with experience in my particular application."
"My favorite nailer for fence jobs."
Best Power Roofing Nailers
2750-1881 Features: -Magnesium housing for job site durability.-Aggressive wear guards and skid resistant pads.-Carbide inserts in tip for long life.-Integrated last nail capture feature and nail lockout.-Patented single action side load canister.-410 inch per pound of driving energy for the hardest of applications.-Quick set adjustable depth control for consistent nail drives.-Over molded grip for comfortable use.-Shingle guide that requires no tools to adjust for fast layouts.-Full round river for more consistent drive quality. Adjustable depth control, full round driver, body and magazine wear guards, side-load canister.
Reviews
Find Best Price at Amazon"I know some people dont think it is worth it to bet one of these just to do one roof however I like how you can get an attachment to use this on vinyl siding. Normally when my family does a roof we can easily get more man power (uncles and grand parents no cousins because they dont go on the roof -.-) sadly this time it was only two of us most of the time which lead me to getting this nailer."
"We've only been using this for a short time, so can't comment on how well it'll hold up, but so far it's been working flawlessly."
"My hubby loves his new nail gun."
"Occasionally I would get the double nail strike but I'm pretty sure that was because of my inexperience and not the hammer."
"it's a roofing nail gun."
"Purchased as gifts."
"Great gun."
Best Power Framing Nailers
The body of this gun is constructed of die-cast magnesium for low weight and durability, giving it the same feel and dependability as the most expensive guns on the market. The driver blade is constructed of very tough heat-treated one-piece hardened steel. NuMax guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to the professional and Do-it Yourselfers alike. Anti-dry fire mechanism activates with 5 nails remaining in magazine.
Reviews
Find Best Price at Amazon"Have run about 4000 nails through it so far."
"Absolutely one of the best things I have ever bought and I am so excited to put it to more good use on future projects!"
"It's built like a tank and operates very smoothly - was able to dial in the perfect pressure for 3.25" nails quickly."
"This displaces the exit point for the nail more than I'd like, which means that the nail is traveling through the air a bit before entering the wood. 2) Again, not the fault of the tool, but it uses 21-degree collated nails, and it appears that the big-box stores are moving more towards 28 and 30-degree tools, limiting the supply of nails. I observed that Home Depot seems to feature 21-degree nailers in their tool rental department, so they had a good supply of Hitachi nails for sale there in the rental area, but not in the hardware department of the store."
"I just finished my shed and have completed a few other projects using this gun. I would DEFINITELY recommend buying this for any of your framing nailing needs."
"The one thing i would improve is the head of the nail gun to make it easier for the user to know precisely the point the nail will hit the wood for better toe-nailing because currently where the large circular head touches the wood it makes you guess."
"I have a 6 gallon, 150 psi pancake compressor that works very well with this tool."
"I use it for putting up fencing, I run 22 degree full head nails in both 2.5 inch and 3.25 inch length; never a miss fire."
Best Power Flooring Nailers
The body of this gun is constructed of durable die-cast aluminum for job site dependability for daily use. It comes with two composite non-marring base plates for added stability and protection against scratches to the flooring surface. NuMax guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to the professional and Do-it Yourselfers alike. White Rubber Mallet ; One Piece Driver Blade.
Reviews
Find Best Price at Amazon"I am very happy with my flooring hammer."
"The strike swing does not have to be really hard, it's just after using this for hours you can get complacent and swing light causing a nail to not penetrate the hardwood all the way. No issue with the foot plate of the nailer scratching or damaging the flooring during installation."
"The second issue is that at the handle and bumper jammer, where hit the gun with the mallet, are kindof bulky and made it hard to reach some spots on the job....but I still LOVE it."
"Initial Review Out-of-the-Box: This nailer/stapler has everything included, as well as good quality chrome assembly tool, hex wrenches and oil. I purchased this because the price was good and renting a tool was a real pain in my area with a long drive."
"The unit is well made and has no problems with sticking of the plunger or with jamming. It arrived early, very well packed, and with all the components in plastic bags. If you arm hurts, change over and get experience with running both a lefty and a righty style so will have an option. You need to pay attention and have a bit of finess when you use these things; pay attention to the details of how and where to place the head and learn what the proper contact position is for the wood you are nailing. A two inch cleat can take a bit of effort to dig out of your red oak."
"I did some trials on a fake floor I set up to get the pressure right, and had to adjust it a few times after, but mostly it would reliably fire the nail in."
Best Power Finish Nailers
Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge nails from 1-1/4 to 2-1/2 inches in length as rapidly as five nails per second. This cordless nailer is powered by DEWALT's 18-volt XRP batteries, and this kit comes with one battery and a 1-hour charger. DC618K 18-Volt, 16 Gauge, 20-Degree Angled Finish Nailer Kit At a Glance: Consistent nail penetration into both soft and hard joints Sequential and bump operating modes Integrated LED lights Includes one battery and 1-hour charger Three-year limited warranty; two-year free service. DEWALT's XRP Extended-Life Battery System A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DC618K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow. The DEWALT DeWalt DC618K Cordless Angled Finish Nailer combines the precision of hand nailing with the speed and ease of pneumatic nailing. Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints.
Reviews
Find Best Price at Amazon"This nail gun works better than my pneumatic gun that I wore out."
"I started out with Senco nails top nailing when I couldn't get the side nailer in. You have to set it to 6 when nailing hardwood floor."
"My last one gave up on me because I oiled it and it says right on the gun do not oil, it was my mistake but I will still continue to buy this nailer for as long as they continue to make them."
"The rubber on end of nail gun will not stay on however."
"The quality of this 16g nailer appears to be consistent with the many other Dewalt tools I own."
"The case with the nailer plus 3 boxes of different lengths of nails inside is still lighter than my compressor and all I have to do is grab it and go."
"Nail gun does its purpose well."
"The ability of this gun to take the same 18v battery as my other cordless DeWalt tools is what really sold me on this."
Best Power Brad Nailers
INCREASED PRODUCTIVITY: a tool-free release lever, jam release, and depth adjustment wheel make your life easier.
Reviews
Find Best Price at Amazon"I started running a Paslode Impulse cordless finish nailer about 10 years ago as a cabinet installer, and it sure was nice to ditch the compressor and hoses! The ergonomics are great--everything you need to adjust is easy to access and the LED lights are great! This nailer takes a little getting used to as there is about a 1 second delay from when you pull the trigger to when the nail is driven, but, so far it has been great and I would highly recommend this cordless nailer!"
"I have taken up woodworking (mostly bookcases and stuff like that) and have gradually been expanding my power tools. This is going to be a total game changer for me...I plan on using this to join peices together then going back to pre drill and screw etc."
"It's great not to have to wait for the A.C to build up pressure and not hsving to lug around a hose."
"Wished it'd bought a battery operated nail gun sooner, and this one works well."
"Works great for small stuff like molding paneling."
"This worked great and was able to penetrate wood and the plaster wall behind it."
"This is a very handy and convenient tool."
"Works great for installing trim."
Best Power Pinners
Features such as a visual reload indicator, adjustable depth of drive and large capacity magazine reduce downtime and offer convenience to the user. The Hitachi NP35A 1-3/8-Inch Pin Nailer tool is warranted to the original purchaser to be free from defects in materials and workmanship for a period of 5-years from the original purchase date. In addition any pistons, drivers and O-rings associated with this tool are covered by a 90-day limited warranted. Large housing shield protects the work surface.
Reviews
Find Best Price at Amazon"My older pin nailer was limited to 3/4 inch pins so I purchased this one. I just finished making 96 risers for raised track for a model L train and this pin nailer functioned perfectly shooting 1 3/8 inch pins at 80 to 100 PSI."
"For reference on how hard the material is, I've bought five different 18 gauge staplers to blind nail 1 1/2" staples to hold up 3/4" t&g maple."
"Used it today for the first time and drove 3/4" pins into hard maple with no issues."
"I know it's a safety thing, but i really want to rig this up so i don't need that trigger."
"This Pin nailer has saved me so much assembly time it is well worth the $ spent and would purchase another one if it where to stop working."
"This was a present for my wife."
"Has replaced my 18g pin nailer, as my go to finish gun for 90% of finish projects."
"Tested it on some MDF and hard maple and noticed right away it just doesn't set the nails well. We work with these guns all day, every day in a professional environment with 3 installers and 5 shop workers so we have a lot of experience and found there is a clear difference between this and the Porter Cable's nail setting capability."