Best Shelf Brackets
Maximum load capacity. Give your components a sturdy and sleek home with the three shelf wall mount. The shelf can hold up to 16.5lbs of components such as a game console, cable box, or Blu-Ray player. DURABILITY: Our wall mounted shelf is built with one large strengthened tempered glass shelf (15 x 11 inch shelf and 5mm thick), designed for DVD/Blu-Ray Players, Satellite/Cable Boxes, Games Consoles, Hi-Fi and Surround Sound Speakers.
Reviews
Find Best Price at Amazon"Some of the instructions are a little unclear, but it was a pretty straight forward set up....there are little holes to put wires in and back out again, but the cap at the bottom prevents cords from just running out the bottom straight down."
"I am sure it would have been quicker if I didn't have my two sons helping out a little to much and forgetting where they set down pieces. No issues with weight or it slowly coming off the wall."
"As soon as I opened the box, I ready saw how to assemble this before I even looked at the instruction.....was like rebuilding a familiar model kit as a kid."
"Instructions for installation were good."
"Keep in mind it is kind of small.But it do the trick.Had to make a small modification on the top and bottom plastic covers so , I can pass the cables thru from top to bottom."
"I really don't love "things"...but I do like some more than others, That said, I was completely satisfied."
"I am very happy with this purchase."
"Nice looking shelves but the screw used to attach the glass shelf to the bracket is a little short."
Maximum load capacity. Give your components a sturdy and sleek home with the dual shelf wall mount. Each shelf can hold up to 16.5lbs of components such as a game console, cable box, or Blu-Ray player. DURABILITY: Our wall mounted shelf is built with one large strengthened tempered glass shelf (15 x 11 inch shelf and 5mm thick), designed for DVD/Blu-Ray Players, Satellite/Cable Boxes, Games Consoles, Hi-Fi and Surround Sound Speakers.
Reviews
Find Best Price at Amazon"Some of the instructions are a little unclear, but it was a pretty straight forward set up....there are little holes to put wires in and back out again, but the cap at the bottom prevents cords from just running out the bottom straight down."
"I am sure it would have been quicker if I didn't have my two sons helping out a little to much and forgetting where they set down pieces. No issues with weight or it slowly coming off the wall."
"As soon as I opened the box, I ready saw how to assemble this before I even looked at the instruction.....was like rebuilding a familiar model kit as a kid."
"Instructions for installation were good."
"Keep in mind it is kind of small.But it do the trick.Had to make a small modification on the top and bottom plastic covers so , I can pass the cables thru from top to bottom."
"I really don't love "things"...but I do like some more than others, That said, I was completely satisfied."
"I am very happy with this purchase."
"Nice looking shelves but the screw used to attach the glass shelf to the bracket is a little short."
Shelf Support, 1/4" , Bracket-Style, Nickel finish, 25 pieces. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Before you pull the trigger and buy these, let me tell you why you may need a different type, and how to tell: ~~~~~~~~~~~~~~~~~~~. There actually is more than one commonly used shelf pin SIZE, first off. The easiest way to determine the pin size that you need is to measure one of the pins themselves if you do in fact have at least one in hand. If you look at the underside of one of your shelf pieces, you MAY notice either cutouts, or plastic clips that are a tell-tale sign of what type of pin you SHOULD use. If there are plastic clips, these are almost ALWAYS used with "PIN" style pegs, and are designed so that the pins actualy snap into those clips. That type of pin is round on both sides, (the part that pushes into the holes on the sides, AND the part that clips into the underside of the shelf) They often, but not always, also have a sort of, "doughnut" right aound the center. ~~~~~~~~~~~~~~~~~~~~~~~~. If the undersides of your shelves do not have a relief of any kind for a certain type of pin, nor the plastic clips, this still does not mean that you can use this "L" type bracket. (If you have at least four lipns, you COULD put the self on the pins, but for the sake of accuracy, it's much better and easier to just slide it in on the, "floor" of the bay it goes in). Now position the movable shelf piece so that either side is butted up square and flush against the side where the pins for it are supposed to go. PLACING THE PINS ON BOTH SIDES OF THE SHELF, WHICH IS, OF COURSE, VERY NECESSARRY, WILL REQUIRE THAT YOUR SHELF HAVE AT LEAST A 1/8", (OR A 3MM) GAP TOTAL WHEN YOU MEASURE AS I HAVE OUTLINED ABOVE, OR IT WILL NOT FIT BETWEEN THE "L" BRACKETS WITHOUT MODIFICATION TO THE SHELF! The pin itself is only 1/4" where it pushes into the hole in your shelving unit, BUT, that metal pin passes ALL THE WAY THROUGH THE BRACKET PORTION, and is much larger than the hole it goes through on the inside."
"The lady that has this desk didn't use all the shelves that came with the desk so she didn't know where they rest of the brackets were and I wanted to use all the shelves."
"I have particle board shelving that uses plastic brackets to hold the shelves at their height locations."
"The problem I had was trying to determine the length of the shank (the round part that goes in the hole)."
"They actually accidentally match my hinges on my cabinets."
"My china fell down along with the shelf that was held up by those flimsy plastic things the builder puts in with the house."
"These worked as advertised and are far better than the pegs."
"A great improvement over the traditional simple pegs."
Best Shelf Brackets & Supports
Maximum load capacity. Give your components a sturdy and sleek home with the three shelf wall mount. The shelf can hold up to 16.5lbs of components such as a game console, cable box, or Blu-Ray player. DURABILITY: Our wall mounted shelf is built with one large strengthened tempered glass shelf (15 x 11 inch shelf and 5mm thick), designed for DVD/Blu-Ray Players, Satellite/Cable Boxes, Games Consoles, Hi-Fi and Surround Sound Speakers.
Reviews
Find Best Price at Amazon"Some of the instructions are a little unclear, but it was a pretty straight forward set up....there are little holes to put wires in and back out again, but the cap at the bottom prevents cords from just running out the bottom straight down."
"I am sure it would have been quicker if I didn't have my two sons helping out a little to much and forgetting where they set down pieces. No issues with weight or it slowly coming off the wall."
"As soon as I opened the box, I ready saw how to assemble this before I even looked at the instruction.....was like rebuilding a familiar model kit as a kid."
"Instructions for installation were good."
"Keep in mind it is kind of small.But it do the trick.Had to make a small modification on the top and bottom plastic covers so , I can pass the cables thru from top to bottom."
"I really don't love "things"...but I do like some more than others, That said, I was completely satisfied."
"I am very happy with this purchase."
"Nice looking shelves but the screw used to attach the glass shelf to the bracket is a little short."
Best Shelf Clips
REVOLUTIONARY Command adhesive strips, they hold strongly on a variety of surfaces, including paint, wood, tile and more. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Some of them had been on the walls for a couple of years and still I removed them with ease."
"These clips are awesome for hanging lightweight wires or keeping light-duty extension cords or lamp coors tucked against a wall or doorframe."
"Smaller than expected, I don't know if I didn't enough but certainly wasn't expecting such tiny little hooks."
"Worked great for hanging spiderwebs from my ceilings inside for Halloween decorations."
"I was attempting to try to hang a tapestry but obviously these are way to small but the problem was the adhesive that sticks to the wall."
"Excellent value as well ese are great clips and very expensive to by at local store in small quanities."
"The sticky side does not stick to the walls in her room."
"I have one hook on the wall every couple feet to hold up a small string of lights and they still fall off."
Best Shelf Pegs & Pins
1/4" Spoon Shelf Support Nickel Pin Length 3/8" Shelf Rest 3/8" wide X 1/2" long.
Reviews
Find Best Price at Amazon"My shelves are about 20" long and are filled with books, and these pins supports the shelves without any issues."
"These are pins."
"Fair price."
"I know, a 5 star rating?"
"These are great when building cabinets and wanting adjustable shelves."
"One thing that really helped was setting up a jig to make sure the holes are perfectly aligned: just take a 1x2 or some other piece of scrap wood, put a row of guide holes on it, and use it for rows of holes that need to be properly lined up."
"Fast chipping."
"Very handy for newly added shelves to my bookcase."